special remind


if you don't find the control system components that you need from our website . 
please do not hestitate to contact us . 
we can help you to find new or refurbished control system parts according to your requirments.

The warranty of industry automation components and parts that "amikon" 1-year warranty.

Please click on the part number or image to view product details.
show:
1-25 of 1258
< page 1 of 51 >
ABB

CONTROL BOARD

Ethernet (2 ports):10/100 Mbps
Voltage: 24 V DC
Power Consumption: 5-7 W (typical)
I/O Handling:up to 64 I/O channels


ABB

IGCT Module

Turn-off Time: ≤ 8 µs.
dv/dt: 1,000 V/µs (min)
Supply Voltage: +15V
Gate Current: 60 A
Capacitance: 5 µF (±10%)
Voltage: 2,000 V DC 
Thermal Resistance: 0.008 K/W
Mounting Pressure: 12–15 kN 

ABB

VOICE FREQUENCY TELEGRAPHY DEVICE

Carrier Frequencies: 300–3400 Hz 
Channel Spacing: 120 Hz or 240 Hz
Shift Range: ±30 Hz, ±60 Hz, or ±120 Hz 
Baud Rate: 50 Bd or 200 Bd 
Voltage: 48/60 VDC
Power Consumption: <15 W
Operating Threshold: -30 dBm 
Voltage: 48/60 VDC nominal 
Operating Temperature: -20°C to +65°C.

ABB

CONTROL UNIT

CPU: 32-bit RISC processor.
Clock Speed: 120 MHz.
Work Memory (RAM): 2 MB
Retentive Memory: 1 MB
Program Memory: 8 MB Flash

ABB

Driver Board

Input Voltage (Logic):24V DC (±10%)
Output Drive Voltage:15V–20V 
Max. Switching Frequency:20 kHz
Isolation Voltage:2500V AC 
Propagation Delay: <500 ns
Operating Temperature:-20°C to +70°C
Storage Temperature:-40°C to +85°C

ABB

APPLICATION BOARD

Supply Voltage:24V DC 
Power Consumption:< 2W
Isolation:500V AC
Operating Temp:-25°C to +70°C
Storage Temp:-40°C to +85°C
Humidity:5–95% (non-condensing)

ABB

MEASUREMENT BOARD

Input Types: 4–20 mA
Resolution: 16-bit ADC
Power Supply: 24 V DC ±10%
Voltage/Current: ±0.05%
RTD/Thermocouple: ±0.1°C 
Operating Temperature: -25°C to +70°C
Vibration: 2 g @ 10–150 Hz
Relative Humidity: ≤95% RH (non-condensing)

ABB

Circuit Board

Input Voltage: 24 VDC
Power Tolerance: Operates within ±10%
Analog Signals: 4–20 mA or 0–10 V
Operating Temperature: -25°C to +70°C
Humidity: ≤95% non-condensing

ABB

Speed ​​Control Board

Operating Voltage: 24 VDC
Power Tolerance: ±10-15% 
Output Type: 0–10 V, 4–20 mA
Speed Range: 0–100%
Temperature Range: -10°C to +55°C (14°F to 131°F)

ABB

Speed ​​Control Board

Rated Voltage: 24 VDC
Operating Range: ±10%
Output Type: PWM
Speed Range: 0–100%
Operating Temperature: -10°C to +50°C (14°F to 122°F)
Humidity: ≤95% non-condensing

ABB

CONTROL BOARD

Input Voltage:24V DC (±10%, isolated)
Internal Logic:3.3V/5V TTL
Protections:Short-circuit
PCB: 6-layer design
Thermal Rating: 0°C to +55°C

ABB

INVERTER MOTHERBOARD

INVERTER MOTHERBOARD
FOR ACS580
3AXD50000716975
Input Voltage Range:380–500V AC (3-phase)
DC Bus Link:Integrated protection
Control Voltage:24V DC
Logic Board Power:Switch-mode PSU
Communication Isolation:1500V AC reinforced
Operating Temp:-15°C to +45°C 

ABB

Control Module

Analog: 2x 0–10V/4–20mA inputs
Digital: 8x programmable DI
Main circuit up to 690V AC
Functional isolation: ≥2.5kV
Thermal Resilience: ±55°C ambient

ABB

CONTROL BOARD

Input Voltage:380–690V AC
Output Power:up to 630 kW
Control Voltage:24V DC (±10%)
Ambient Operation:-15°C to +50°C
Humidity Protection:<95% non-condensing
CE Mark: Low Voltage Directive
Digital I/O: 6 programmable DI
Analog I/O: 2x 0–10V/4–20mA 

ABB

CONTROL UNIT

Input Power (AC):400–690V (±10%) 3-phase
Motor Power Range:250kW–1.5MW
Control Voltage:Single-phase 26V DC to 30V DC (±15%)
Operating Temp:-15°C to +50°C
Harsh Environment:UL 1203
Busbar Terminals:values 8.9Nm ±0.5
AS-Interface Safety ATEX Gateway

ABB

CONTROL UNIT

Input Voltage:200–690V AC (-15%/+10%)
Power Range:15–400kW
Control Voltage:Single-phase 24V DC
Relay Outputs:4 × Form-A 
AF-650PG: Profibus DP or CANopen

ABB

CURRENT MEAS.SCAL

Input Range:0–600A AC/DC
Output Range:±10V DC / 4–20mA
Isolation Voltage:2.5kV RMS 
Accuracy:±0.25% FS (25°C)
Bandwidth:DC – 10kHz 
Drift:<75ppm/°C
Response Time:<50µs
Hall Effect Sensor: 24V DC

ABB

Voltage Meas.Scaling Card

Rated Input Voltage:3300V AC/DC ±10%
Output Signal:±10V DC
Isolation Voltage:8kV RMS
Bandwidth:DC – 5kHz (-3dB)
Linearity Error:≤±0.15% FS
Drift:<50ppm/°C
Output Ripple:<5mV p-p at 50Hz
Response Time:<500µs for step inputs
Input Impedance: 1MΩ nominal

ABB

POWER SUPPLY BOARD

AC Input Range: 200–500V AC
Frequency: 50/60Hz nominal 
Input Surge Withstand: 4kV
+24VDC Logic Supply: 4A continuous
±15VDC Gate Driver Supply: 0.5A per rail (±2% regulation)
Standby 5VDC: 2A 
Total Efficiency (85% load): ≥88%
Operating Temp: -25°C to +70°C

ABB

R9 Input Spare Kit

Low Voltage (LV): 380–480V AC
Optional High Voltage (HV):500–690V AC
Short-Circuit Current Rating (I_SC): ≤100 kA
Inrush Current Limit: ≤150% × rated input current
Isolation: ≥2.5 kV
Dynamic braking fuses:690V AC, 100–800A
Ambient Temp Range: -15°C to +45°C
Storage Humidity: ≤95% non-condensing

ABB

IGBT ASSEMBLY KIT

Category: Replacement IGBT Assembly Kit
Nominal Voltage (V_CE): 500V
Insulation Voltage: 2500V
Tjmax (ΔT over case): 70K

ABB

THYRISTOR/DIODE MODULE

R8 SINGLE MODULE SP KIT
Forward Voltage: 1200–2500V range
Average On-State Current:500–2000A
Surge Current :10–50 kA
Isolation: ≥2000 V AC
Junction Temperature:>125°C

ABB

Conversion board

Supply Voltage:24V DC
Analog Inputs: 0–10 V / 4–20 mA
Communication Ports: Terminals for RS-485
Isolation Rating: ≥1500 V AC
Power Handling: 5-10A
Operating Temperature: -25°C to +70°C

ABB

EXPANSION MODULE

EXPANSION MODULE
CONTROL BOARD MODULE
ZCU-14 PACKED CONTROL UNIT
REPLACES OBS MODEL 3AXD50000005164

ABB

SPAREPART KIT IGBT MODULE 900A

Voltage Class: 1200V
Continuous: 900A
Continuous: 900A
Switching Frequency: Optimized for ≤3–8 kHz
Conduction Losses: 1.8–2.5V
Isolation Voltage: ≥3000 V
Thermal Resistance:0.03–0.07 K/W
operating temperature: -40°C to +125°C

show:
1-25 of 1258
< page 1 of 51 >
All product and service marks contained herein are the trademarks or service marks of their respective owners.