ALL MANUFACTURERS

ANALOG INPUT MODULE

SIPLUS S7-300 
SM 331-20-pole -25...+70°C 
with conformal coatingbased on 
Analog input isolated 2 AI
Resolution 9/12/14 bits
U/I/thermocouple/resistor
alarm diagnostics
1x 20-pole
Removing/inserting with active backplanebus

Servo Control

Design Euro card
Functionality Valve specific
valve parametersfixed
User software Application parameters from 
PC viauser software ProVRD
Operating system MS-DOS
Supply voltage 18...30VDC 
Solenoid current ranges 0,8 / 2,7 / 3,5A
Current consumption max. 2,0A
Pre-fuse 1,6 / 3,15A fast 
Ambient temperature 0...+50°C
Connection DIN 41612F, 48-pole
Command signal inputs 0...+/- 10V

Axis Controller Card

Axis Control Card 
UIMC-III-1
for Universal GSM Machine
Radisys Part Number UIMC III-I

VME Interface Control Card

Work With MV Series Controllers
6U Single-Slot VME Modules
running at 40 MHz
can be configured with 2, 4, or 8 MB

Circuit Board

Analog Inputs:4-20 mA, 0-10 VDC
Digital Inputs/Outputs: TTL, 24 VDC
Power Supply Input: 24 VDC or 48 VDC
Logic Supply: 5 VDC or 3.3 VDC
Operating Temperature: -20°C to +70°C
Storage Temperature: -40°C to +85°C

Circuit Board

Analog Inputs 4-20 mA, 0-10 VDC
Digital Inputs/Outputs TTL or 24 VDC
Power Supply Input: 24 VDC or 48 VDC
Operational voltage for logic and I/O circuitry: 5 VDC or 3.3 VDC
Operating Temperature: -20°C to +70°C
Storage Temperature: -40°C to +85°C

AC servo drive

SERVO DRIVE
S700 SERIES
3 PHASE
6 AMP
120-480 VAC
50/60 HZ
4.5 KVA
IP20

Gateways

PROFIBUS DP-V0 Master 
to Modbus RTU Slave
Product Category: Gateways
Product: X-Gateways
Data Rate: 12 Mb/s
Interface Type: Ethernet, USB
IP Rating: IP20
Operating Supply Current: 200 mA
Product Type: Gateways
Series: Anybus X-Gateway
Subcategory: Ethernet & Communication Modules

Communication Module

Tricon
TCM SERIES
2 X NET LINK PORTS
4 X 9 PIN SERIAL PORTS
1 X 9 PIN DEBUG PORT

Current/Ground Fault Sensing Module

Current/Ground Fault Sensing Module 
for E300 Overload Relays, 
0.5-30A
DIN Rail / Panel Mount, 
with Line- and Load-Side Power Conductor Terminals, 
Directly Replaces 193-ECPM2 
Series A

Operator Panel

Operating Temperature 0° to 50° C
Storage Temperature -20° to 80° C
Operating Humidity 5 to 95% (non-condensing)
Air Composition No corrosive gases permitted
Power Budget Requirements 5 VA @ 8--30 VDC

Safety-Related Controller

Fuse (external) 10 A time-lag (T)
Buffer for date/time Gold capacitor
Temperature class T4 (Zone 2)
Operating temperature 0 °C...+60 °C
Storage temperature -40 °C...+85 °C 

CPU module

Processor Atom E3815 1.46 GHz
Main 256 MB with ECC
Static RAM 2 MB with ECC
backed up by battery
1 GB on-boad flash memory
SDHC (4 to 32 GB) Class 10
D-sub 9 pins, male (*2)
Full/Half duplex (software settings)
Synchronisation Asynchronous

CPU module

SH-4A (SH7730) 256 MHz
128 MB with ECC
1 MB with ECC, backed up by battery 
128 MB on-board flash memory
RS-422/RS-485: 
120 Ω built-in, 
ON/OFF (DIP switch settings)
SB bus (single)

CPU module

Operation 0° to 55°C 
Transportation/storage  40° to 85°C (*1)
Dust 0.3 mg/m3 or less
Resistance to corrosive gases 
ANSI/ISA S71.04 Class G2 (Standard) 
(ANSI/ISA S71.04 Class G3, option)
Resistance to vibration 
0.15 mm P-P (5 to 58 Hz), 1 G (58 to 150 Hz)
Resistance to shock 
15 G, 11 ms 
(during power-off, for sine half-waves in XYZ-directions)
Altitude 2000 m or less

CPU module

High-performance
high-elibility modular controller
Memory with ECC
Low heat dissipation eliminates the need for a fan
Awealth of RAS features -CPU self-diagnostics
temperature monitoring. 1/0 diagnostics, and more
power supply module, local bus (SB bus)
and control network can all be duplexed
and all modules are hot-swappable
Can function as link active schedulers 
(L ASs) for low-speed voltage mode (H1) 
FOUNDATION Fieldbus segments
and link up FOUNDATION Fieldbus-enabled feld devices

CPU module

Processor Atom E3815 1.46 GHz
Main 256 MB with ECC
Static RAM 2 MB with ECC
backed up by battery
1 GB on-boad flash memory
SDHC (4 to 32 GB) Class 10
D-sub 9 pins, male (*2)
Full/Half duplex (software settings)
Synchronisation Asynchronous
4 Ethernet ports : RJ45 modular jacks

CPU module

Processor Atom E3815 1.46 GHz
Main 256 MB with ECC
Static RAM 2 MB with ECC
backed up by battery
1 GB on-boad flash memory
SDHC (4 to 32 GB) Class 10
D-sub 9 pins, male (*2)
Full/Half duplex (software settings)
Synchronisation Asynchronous

I/O Assembly Module

3U VME Module
I/O Assembly Module
20-Pin SCSI
9-Pin DE Interface

Axis Control Card

operating 0 to 60°C ambient
storage -40 to 85°C
Humidity 5% to 95% non condensing  
Altitude  10,000 ft (3,000 m)
Vibration   0.015 inch (0.38 mm) 
Peak to Peak displacement with 2.5 g peak (max) 
accelerationover 5 to 2000 Hz 
Shock  0 g, 11 ms duration, half-sine shock pulse 
Current +5V @ 0.30A 

CPU Module

MC68030 at 25 MHz with MMU
MC68882 at 25 MHz
Data and Instruction, each 256 KByte
On-board via the FGA-002B
16 MByte DRAM with Byte Parity
4 MByte, 32-bit

PSU3400 POWER SUPPLY

SITOP PSU3400 
24 V/10 ASITOP PSU3400 
24 V/10 A Stabilized power supplies 
Input: DC 24 V(18...32 V) 
Output: DC 24 V/10 A

Control board

Mechanical rigidity: flexibility
Layers: Multiple layers
Substrate: Aluminum
Insulation material: metal based
Insulation layer thickness: Conventional board
Flame retardant properties: VO board
Processing technology: electrolytic foil
Reinforcement material: fiberglass cloth base
Edge resin: Epoxy resin (EP)

Control board

Mechanical rigidity: flexibility
Layers: Multiple layers
Substrate: Aluminum
Insulation material: metal based
Insulation layer thickness: Conventional board
Flame retardant properties: VO board
Processing technology: electrolytic foil
Reinforcement material: fiberglass cloth base
Edge resin: Epoxy resin (EP)

Enraf Vito LT Interface 762

An electronic converter used 
in combination with the VITO probes
HART® communication to tank gauging ATG *2
ATEX KEMA 01ATEX1212
IECEx KEM 05.0014
Kosha certificate; 13-AV4BO-0487
FM I. D. 3015746
CSA certificate 1635480