PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
4352B - Tricon Communication Module
Triconex 4352B is a fiber-network Tricon Communication Module for Tricon 10.3 and later. It combines two 100 Mbps MT-RJ fiber interfaces with four RS-232/RS-485 serial ports.
Use 62.5/125 micrometre multimode fiber meeting the manufacturer cable requirements. This B-generation module supports the documented IP multicast function; it does not include the embedded OPC server assigned to 4353 and 4354.
Use 62.5/125 micrometre multimode fiber meeting the manufacturer cable requirements. This B-generation module supports the documented IP multicast function; it does not include the embedded OPC server assigned to 4353 and 4354.
BEFORE YOU BUY
Check the complete installed configuration
ACTUAL APPLICATIONS
Where 4352B supports Tricon communications
These uses follow the manufacturer port assignments and system-version rules. Validate the installed network and application before commissioning.
-
01 · OPTICAL LINKS
Connect a documented fiber segment
Use the specified 62.5/125 micrometre multimode cable and MT-RJ connection. Check the complete optical path against the documented maximum two-kilometre fiber distance. -
02 · MULTICAST DATA
Configure the supported multicast role
Apply the IP multicast capability explicitly assigned to 4352B within the TCM protocol table. Validate network configuration and receiving applications rather than assuming a shared family name provides this capability. -
03 · MIXED INTERFACES
Retain serial devices beside Ethernet
Use the four serial interfaces for the supported Modbus roles while fiber handles the chosen network services. Check per-port addressing and aggregate serial throughput when several devices are active.
Technical specifications for 4352B
-
Product Model4352B
-
Product ParametersTricon Communication Module
-
ManufacturerInvensys
-
Supported Tricon version10.3 and later
-
Network portsTwo MT-RJ fiber ports
-
Network medium62.5/125 micrometre multimode fiber
-
Network speed100 Mbps
-
Serial connectorsFour DB-9 ports
-
Serial electrical interfacesRS-232 and RS-485
-
Maximum serial rate per port115.2 kbps
-
Aggregate serial throughput460.8 kbps
-
Port isolation500 VDC
-
TriStation Ethernet assignmentNET 1 and NET 2
-
Modbus TCP assignmentNET 1 and NET 2
-
TSAA Ethernet assignmentNET 1 and NET 2
-
Embedded OPC serverNot supported
-
Logic powerLess than 10 W
-
Module status indicatorsPass, Fault, Active and FIRM
View all additional
Alternative Names
4352B
Triconex 4352B
Tricon TCM 4352B
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match the controller generation and network assignment
Triconex 4352B is a fiber-network Tricon Communication Module for Tricon 10.3 and later. It combines two 100 Mbps MT-RJ fiber interfaces with four RS-232/RS-485 serial ports.
Use 62.5/125 micrometre multimode fiber meeting the manufacturer cable requirements. This B-generation module supports the documented IP multicast function; it does not include the embedded OPC server assigned to 4353 and 4354.
Check the exact TCM generation, logical-slot pairing and permitted chassis location. Serial port 1 can serve Modbus or GPS; serial port 4 can serve Modbus or TriStation. Do not treat either shared assignment as simultaneous use.
Features:
- Two 100 Mbps fiber ports
- MT-RJ multimode connections
- B-generation IP multicast support
The 4352B requires configuration and installation checks before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Record the exact 4352B identity, controller version and communication configuration. Label all cables before removal. Paired TCMs are independent modules, not hot spares.
Use 62.5/125 micrometre multimode fiber meeting the manufacturer cable requirements. This B-generation module supports the documented IP multicast function; it does not include the embedded OPC server assigned to 4353 and 4354.
Retain the validated safety logic and proof-test records. Recommission affected channels under the approved site procedure.
Features:
- Two 100 Mbps fiber ports
- B-generation IP multicast support
- Tricon 10.3 and later
The 4352B requires replacement verification of port assignments, protocol configuration and restored communication before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The Manufacturer's Manual download is a manufacturer technical-data extract, not a complete operation manual. The installation guide contains only source-supported checks. Specifications of other configurations shown on source pages must not be applied to this exact order.
Features:
- Sources: Invensys Tricon v9-v10 Planning and Installation Guide, 9720077-012, February 2009
- Use complete equipment instructions for installation and commissioning.
- Accessories are supplied only when listed in the quotation
Documentation for the 4352B is supplied here as a technical-data extract; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size49 × 45.3 × 6.8 cm
-
Shipping weight3.00 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 4352B
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What fiber size is required for the 4352B network?
The manual specifies multimode 62.5/125 micrometre fiber with MT-RJ connection. A different fiber type must not be inferred from the nominal link speed. -
Is the documented two-kilometre distance a copper-cable rating?
No. It is the maximum specified for the TCM fiber-optic cable arrangement, approximately 1.24 miles. -
Are the fiber-optic cables supplied by Triconex?
The guide states that users must provide the fiber-optic cables and that these cables are not available from Triconex. -
Which cabling standard is identified for the optical connection?
The fiber requirements cite ANSI/TIA/EIA-568-B.3. Use this together with the stated connector, fiber size and distance requirements. -
Can 4352B provide a 10 Mbps optical link?
The specified fiber-network speed is 100 Mbps. The copper 10/100 Mbps description must not be applied to this fiber model. -
Where may UDP/IP peer communication be assigned for this generation?
The protocol table permits UDP/IP Peer-to-Peer on NET 1 or NET 2 for 4352B. DLC Peer-to-Peer remains assigned to NET 1. -
Can serial port 1 receive the documented GPS time reference?
Yes. The table assigns the Trimble GPS interface to serial port 1, which can alternatively be configured for Modbus. -
Does a working LINK indication prove the required application protocol is configured?
No. LINK is a network-port indication. Check the intended protocol assignment, configuration and communication results separately.
READY TO VERIFY YOUR PART?
Get a 4352B quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
