Ovation

IOIC module

5X00875G01
OCR3000 Controller 
IOIC module
OCR3000 Controller Atom CPU Module

BASE ASSEMBLY

BASE ASSEMBLY
REMOTE NODE CONTROLLER
ADDRESS SELECTION SWITCH

Analog Input Module

SPARE PART
INPUT MODULE
PMOD ASSEMBLY
ANALOG INPUT
8 CHANNEL
VOLTGAGE W/ TEMPERATURE SENSOR

Remote I/O Controller Module

I/O Channels: 4–20 mA
Scalability: 8–16 I/O points per module 
Data Transfer Speed: Up to 100 Mbps 
Voltage: 18–32 VDC
Current Draw: <2 A typical 
Operating Temperature: –40°C to +70°C 
Storage Temperature: –50°C to +85°C
Humidity: 5–95% RH (non-condensing)

Industrial Control Module

Digital Inputs/Outputs: 
Supports discrete I/O for control and status monitoring.
Analog Inputs/Outputs: 
Can include support for continuous analog signals
Operating Temperature: 0°C to 60°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95%, non-condensing

DC power supply

8920-PS-DC
Power Module-Field Input
24VDC In
5A@12VDC Out
Power for 2/1 (IS) modules
Use2/1 (IS) 
modules power with 
support for load sharing redundancy

Analog Input Module

Ovation Distributed Control System 
8 to 16 analog input channels
Analog signals 
4-20 mA, 0-10 V
16-bit resolution for high precision
0°C to 60°C

Analog Input Module

Channels: 15
Signal Types:
standard current input:4-20 mA 
voltage inputs0-5 VDC
Input Range:  0-10 VDC, ±10 VDC, 
Signal Conversion: 16-bit 
Input Impedance: High input impedance f
or accurate measurements without significant loading.
Input Accuracy: Typically ±0.1% 
Operating Temperature:  -20°C to +60°C

Analog output module

5X00501G01
Analog Input
4-20mA DC
0-10mV DC
100-240Vac

KEYBOARD

4D33935H01
DISCONTINUED BY MANUFACTURER
OVATION KEYBOARD
MEMBRANE KEYPAD

Local I/O Bus Cable

BUS TERMINATOR MODULE

1B30023H01
DISCONTINUED BY MANUFACTURER
I/O BUS TERMINATOR ASSEMBLY
12 PIN

Power Supply Module

Input Voltage:85-264V AC (47-63Hz)
Output Voltage:24V DC ±1%
Output Current:10A continuous (12A peak for 5s)
Power Rating:240W
Efficiency:>92% @ 230V AC
Inrush Current:<25A @ 230V AC

Remote I/O MAU

Remote I/O Node

I/O MODULE
REMOTE NODE
2 KM
RS-232 DIAGNOSTIC PORT

Power Supply Module

Input Voltage:85-264V AC (47-63Hz)
Output Voltage:24V DC ±1%
Output Current:10A continuous (12A peak for 5s)
Power Rating:240W
Efficiency:>92% @ 230V AC
Inrush Current:<25A @ 230V AC

HART Analog Output Module (EM)

Number of channels 8
Channel Update Rate 24 mS 
Output Range 4 to 20 mA
D/A Resolution 14 bits
Accuracy over Temperature Range 0.25% of Span
Output Loading 4-20mA into 700 ohm load Maximum 

EMOD assembly Foundation fieldbus

HART Analog Output Module (PM)

Number of channels 8
Channel Update Rate 24 mS 
Output Range 4 to 20 mA
D/A Resolution 14 bits
Accuracy over Temperature Range 0.25% of Span

Servo Driver Electronics Module

Analog Input Module

INPUT MODULE 
CONTACT 
EVENT
32 CHANNEL
Channels: 32 analog input channels
Signal Types Supported: 4-20 mA, 0-10 VDC
Signal Conversion: 16-bit ADC 
for high-resolution data acquisition
Accuracy: Typically ±0.1%