PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 21000, 24701, and 164818 ProbeHousing Assemblies
- 24701-34-05-00-041-03-02
In Stock
Fast Shipping Available
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
24701-34-05-00-041-03-02 - Proximity Probe Housing Assembly
Bently Nevada 24701-34-05-00-041-03-02 provides an externally mounted housing for a 3300 XL 8 mm reverse-mount proximity probe with connector protection. This configuration uses a 303 stainless steel body and a 304 stainless steel sleeve, with a 0.5 m probe lead.
The ordered penetration is 4.1 inches with no standoff adapter and a 3/4-14 NPT mounting thread. Fitting option 03 provides a plug, reducer and cable seal grip. This is not a CA-prefixed explosion-proof housing; the probe approval option does not certify the housing as explosion proof.
The ordered penetration is 4.1 inches with no standoff adapter and a 3/4-14 NPT mounting thread. Fitting option 03 provides a plug, reducer and cable seal grip. This is not a CA-prefixed explosion-proof housing; the probe approval option does not certify the housing as explosion proof.
BEFORE YOU BUY
Check the complete ordered configuration
ACTUAL APPLICATIONS
Where 24701-34-05-00-041-03-02 supports measurement tasks
Manufacturer literature supports the following measurement arrangements. Confirm the complete installed system and the exact ordered configuration before selecting this component.
-
01 · SHAFT VIBRATION
Locate an external vibration probe
Use the 4.1-inch penetration configuration to position the selected XL 8 mm probe for dynamic shaft measurements on a fluid-film bearing machine. Check sleeve clearance and the conductive target geometry. The external housing supports the probe; the complete transducer chain performs the measurement. -
02 · AXIAL POSITION
Support a static position measurement
The housing can carry its selected proximity probe for static position measurement. The 303 stainless steel body and NPT mounting interface must suit the machine location, while penetration adjustment establishes the required probe-to-target gap. Confirm the monitor range and target arrangement with the probe documentation. -
03 · PHASE REFERENCE
Position a timing-reference probe
The selected XL 8 mm family supports Keyphasor reference and speed measurements. Use the housing only where its sleeve and cable-entry arrangement suit that target. Speed or overspeed protection requires the manufacturer application guidance and the complete monitoring-system design, not housing selection alone.
Technical specifications for 24701-34-05-00-041-03-02
-
Product Model24701-34-05-00-041-03-02
-
Product ParametersProximity Probe Housing Assembly
-
In stock1 unit
-
ManufacturerBently Nevada
-
Probe configuration option34: 3300 XL 8 mm, protector, approval option
-
Probe cable length option05: 0.5 m
-
Standoff adapter option00: No standoff adapter
-
Probe penetration option041: 4.1 in (104.14 mm)
-
Fittings option03: NPT plug, reducer and cable seal grip
-
Mounting thread option02: 3/4-14 NPT
-
Housing body material303 stainless steel
-
Sleeve material304 stainless steel
-
Penetration adjustment+/-0.5 in (13 mm)
-
Enclosure classificationCSA Type 4; standard non-CA housing
-
Long-sleeve support thresholdAdditional support above approximately 12 in
-
Probe thermal range-51 to +177 deg C; pressure-seal caution below -34 deg C
View all additional
Alternative Names
24701-34-05-00-041-03-02
24701 stainless probe housing
4.1-inch external probe assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match the installed measurement arrangement
Bently Nevada 24701-34-05-00-041-03-02 provides an externally mounted housing for a 3300 XL 8 mm reverse-mount proximity probe with connector protection. This configuration uses a 303 stainless steel body and a 304 stainless steel sleeve, with a 0.5 m probe lead.
The ordered penetration is 4.1 inches with no standoff adapter and a 3/4-14 NPT mounting thread. Fitting option 03 provides a plug, reducer and cable seal grip. This is not a CA-prefixed explosion-proof housing; the probe approval option does not certify the housing as explosion proof.
Check the selected proximity-probe system and the machine target independently of the housing material. Cable entries, thread engagement and sleeve support must match the controlled installation; no housing drawing establishes a safe protection-system design by itself.
Features:
- 4.1-inch probe penetration
- 303 stainless steel housing body
- Half-metre probe lead
The 24701-34-05-00-041-03-02 requires exact configuration and installation checks before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Compare all six option fields, not just the housing family. Retain the required penetration, standoff arrangement, probe lead, fittings and mounting thread.
This order uses 303 stainless steel for the body and 304 stainless steel for the sleeve. Review the installed material requirements and inspect the actual target clearance before replacement.
Preserve the applicable probe user guide and assembly drawing. The downloads are a data summary, an identified technical-data extract and a limited installation checklist, not a complete operation manual.
Features:
- 4.1-inch probe penetration
- Half-metre probe lead
- 3/4-14 NPT mounting connection
The 24701-34-05-00-041-03-02 requires replacement verification of the complete ordered configuration and installed measurement system before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The Manufacturer's Manual download is a manufacturer technical-data extract, not a complete operation manual. The installation guide contains only source-supported checks. Specifications of other configurations shown on source pages must not be applied to this exact order.
Features:
- Sources: Bently Nevada 141600 Rev. AC / 141194 Rev. AM
- Use complete equipment instructions for installation and commissioning.
- Accessories are supplied only when listed in the quotation
Documentation for the 24701-34-05-00-041-03-02 is supplied here as a technical-data extract; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.5 × 22.4 × 3.3 cm
-
Shipping weight0.10 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 24701-34-05-00-041-03-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Are the body and sleeve made from the same stainless grade?
No. The manufacturer specifies 303 stainless steel for the 24701 body and 304 stainless steel for its sleeve. Retain both material designations in the purchase specification. -
What cable diameters can the option-03 seal grip accept?
The supplied grommet ranges are 1/8-3/16, 1/4-5/16 and 5/16-3/8 inches. Select the grommet that matches the actual cable, rather than assuming one seal covers every diameter. -
Which reducer is included with fitting code 03?
The fitting set includes a 3/4-14 to 1/2-14 NPT reducer, one 3/4-14 NPT plug and the cable seal grip. It is not the two-explosion-proof-fitting option. -
Does a probe with an approval option make this an explosion-proof housing?
No. The manufacturer restricts its CSA explosion-proof housing claim to specified CA-prefixed configurations. This 24701 order has no CA prefix, and option 03 is not among the listed qualifying fitting combinations. -
Is the 041 dimension the full outside height of the assembly?
No. It encodes 4.1 inches of probe penetration. The complete housing envelope includes other parts and must be checked against the assembly drawing. -
Will a standoff spacer be supplied with this order?
No. The 00 standoff field selects no standoff adapter. Do not plan installation around an unlisted adapter or infer a spacer from the housing illustration. -
Can the probe lead terminate inside a sleeve longer than the lead?
No. The housing documentation requires the probe lead to be longer than the sleeve. Compare the selected 0.5 m lead with the actual installed sleeve arrangement. -
Where should MRO staff look for the probe identity when little cable is visible?
The manufacturer notes that some penetration and standoff combinations use a flag label for the probe part number and serial number. Inspect that label as well as the housing identity.
READY TO VERIFY YOUR PART?
Get a 24701-34-05-00-041-03-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
