General Electric

Expansion Backplane Cable

Series:Series 90-30
Part Number:IC693CBL303
Type:Cable
Purpose:HHP connection
Connector type:Canon DA15S with solder pot
Hood:AMP 207470-1 connector shell
Cable Type:Belden 9508
AWG:#24 (.22 mm2)
Cable Length:6 feet (2 meters)

Expansion Backplane Cable

Series:Series 90-30
Part Number:IC693CBL301
Product Description:I/O Bus Expansion Cable
Type:Cable
Length:2 meters
Compatibility:CPUs, remote racks
Feature:Wye adapter
Supported CPUs:Series 90--30 CPUs
Cable Shield:Continuous
Connector 1st end:25-pin D connector (male)
Backplane current draw:N/A
Maximum number in a system:Depending on the CPU

GENIUS BUS CONTROLLER

Series:Series 90-30
Part Number:IC693BEM331K
Current consumption:<300mA at +5V DC
Number of LEDs:2 (OK and COMM OK)
Module Type:Genius Bus Interface
Compatible Series 6 controllers:IC660CBB902F/903F
Number of I/Os:31 Maximum
Maximum Data Rate:128 bytes
IP rating:IP 20

SERIES 90-30 I/O BUS MODULE

Series:Series 90-30
Part Number:IC693BEM331
Current consumption:<300mA at +5V DC
Number of LEDs:2 (OK and COMM OK)
Module Type:Genius Bus Interface
Compatible Series 6 controllers:IC660CBB902F/903F
Number of I/Os:31 Maximum
Maximum Data Rate:128 bytes
IP rating:IP 20

LINK INTERFACE MASTER MODULE

Brand:GE Fanuc
Series:Series 90-30
Part Number:IC693BEM321F
Module Type:I/O Link Interface
Number of Slots:1 (single slot)
Backplane Support:Universal Backplane
Input Points:1024
Output Points:1024
Available connector:20-pin Honda socket
Max Number of Slaves:16

I/O Link Interface Module

Brand:GE Fanuc
Series:Series 90-30
Part Number:IC693BEM320E
Type of Component:I/O Link Module
Number of Slots:1
Backplane Support:Universal
I/O Points:32 or 64
Configuration:Jumper slectable
LEDs:2 status LEDS (OK and RDY)
Power Supply:5 VDC, from PLC backplane

Motion Mate Axis Module

Series:Series 90-30
Product Description:Axis Positioning Module (APM)
Part Number:IC693APU302
No. of Axes:2 Axis
Operating modes:Standard mode; Follower mode
Module LED indicators:EN1, EN2, STST, OK and CFG
Servo Loop Update:2 milliseconds
Slot width:Single slot
Terminal block:Weidmuller RD25 910648 o or equivalent
Connector Types:24-pin High Density, 25-pin D Type
No. of modules per baseplate:Three (3)
Compatibility:Series 90-30 PLCs
LED indicators:EN1; EN2; STAT; OK; CFG
Current draw:800 mA @ 5 VDC

High Speed Counter Module

Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693APU300
Product Description:High-Speed Counter (HSC) module
No of input channels:Twelve (12) positive logic inputs
Maximum Count Rate:80 kiloHertz
Input signal voltage:5 VDC; 10VDC - 30 VDC
Minimum Count Rate:20 kiloHertz
Input frequency:8 kHz
Input/Output Type:Positive Logic
No. of Logic Inputs:12
Maximum count rate:up to 200 kHz
Output Voltage Range:4.7 to 40 Volts DC
LED indicators:BOARD OK and CONFIG OK
Isolation:250 Volts AC
Power Consumption:250 mA at 5 Volts DC

Analog I/O Module

Series:Series 90-30
Part Number:IC693ALG442
Product Description:Analog Current/Voltage Combination Module
No of Output Channels:2, single-ended
Update Rate:8 milliseconds
Resolution at 4-20 mA:0.5 microamps
Resolution at 0-20 mA:0.625 microamps
No of Input Channels:4 differential
Input Range:-0-10 Volts, -10 to 10 Volts
Input Impedance:800 K Ohms

Analog Current/Voltage Output Module

Series:Series 90-30
Part Number:IC693ALG392
Resolution at -10 to 10 V:0.312 mV
Product Description:Analog Current/Voltage Output
No of Channels:8
Current Range:4 to 20 mA, 0 to 20 mA
Voltage Range:0 to 10 V, -10 to 10 V
External Supply Voltage Range:20 to 30 VDC
Update Rate:8 ms all channels
Resolution at 4-20 mA:0.5 microamps
Resolution at 0-20 mA:0.625 microamps
Resolution at 0-10 V:0.312 mV

Analog output module

Series:Series 90-30
Part Number:IC694ALG391
Channel update rate:5 ms
Product Description:Analog output module
No of Channels:Two (2) output channels
Digital Resolution:12 bits, typical
Range:4-20 mA, 0-20 mA
External Supply Voltage Range:20 to 30 VDC
Isolation:1500 VAC
Update Rate:5 msec
Resolution at 4-20 mA:4 microamps
Isolation, Field to logic side:1500 VAC for 1 minute
Resolution at 0-20 mA:5 microamps
Maximum Compliance Voltage:25 Volts
External Supply Voltage Range:20 to 30 VDC (24 VDC typical)

OUTPUT MODULE

Series:Series 90-30
Range:-10 to +10 Volts
Part Number:IC693ALG390G
Product Description:Analog Voltage Output
No of Channels:2
External Supply Voltage Range:18 to 30 VDC
External Supply Voltage Ripple:10%
Isolation:1500 Volts RMS field to the logic side
Update Rate:5 ms all channels
Resolution:2.5 mV
Accuracy:+/- 5 mV at 25 degrees Celsius

OUTPUT MODULE

Brand:GE Fanuc
Series:Series 90-30
Range:-10 to +10 Volts
Part Number:IC693ALG390C
Product Description:Analog Voltage Output
No of Channels:2
External Supply Voltage Range:18 to 30 VDC
External Supply Voltage Ripple:10%
Isolation:1500 Volts RMS field to the logic side
Update Rate:5 ms all channels
Resolution:2.5 mV
Accuracy:+/- 5 mV at 25 degrees Celsius

Analog Current Input Module

Series:Series 90-30
Part Number:IC693ALG223
Range:4-20 mA, 0-20 mA
Accuracy:0.25% at 25 degree Celsius
Product Description:Analog Current Input
External Power:24 VDC
No of Channels:16
Update Rate:13 ms all channels
Resolution at 4-20 mA:4 microamps
Resolution at 0-20 mA:5 microamps
Input Impedance:250 ohms
Input Filter Response:200 Hertz

Analog Input Module

Range:4-20 mA, 0-20 mA
Accuracy:0.25% at 25 degree Celsius
Product Description:Analog Current Input
External Power:24 VDC
Product Description:Analog Current Input
No of Channels:16
Isolation:1500 volts RMS field to the logic side
Update Rate:13 ms all channels

Analog Voltage Input Module

Series:Series 90-30
Part Number:IC693ALG222
Range:-10 to +10 V, 0 to 10 V
Brand:GE Fanuc
Input Types:Unipolar and bipolar
Product Description:Analog Voltage Input
Resolution at 0V to +10V:2.5 mV (1 LSB = 2.5 mV)
Resolution at –10V to +10V:5 mV (1 LSB = 5 mV)
Linearity:< 1 LSB
No of Channels:16
Update Rate:13 ms for all channels

INPUT MODULE

Series:Series 90-30
Part Number:IC693ALG222
Range:-10 to +10 V, 0 to 10 V
Brand:GE Fanuc
Input Types:Unipolar and bipolar
Product Description:Analog Voltage Input
Resolution at 0V to +10V:2.5 mV (1 LSB = 2.5 mV)
Resolution at –10V to +10V:5 mV (1 LSB = 5 mV)
Linearity:< 1 LSB
No of Channels:16
Update Rate:13 ms for all channels

Analog Input Module

Series:Series 90-30
Brand:GE Fanuc
Accuracy:0.1 % full scale
Part Number:IC693ALG221G
No of Channels:4
Range:4-20 mA, 0-20 mA
Update Rate:2 ms all channels
Input Impedance:250 ohms
Input Filter Response:325 Hertz

Input Module

Series:Series 90-30
Brand:GE Fanuc
Accuracy:0.1 % full scale
Part Number:IC693ALG221
No of Channels:4
Range:4-20 mA, 0-20 mA
Update Rate:2 ms all channels
Input Impedance:250 ohms
Input Filter Response:325 Hertz

ALPHANUMERIC DISPLAY COPROCESSOR MODULE

Brand:GE Fanuc
Series:Series 90-30
Part Number:IC693ADC311D
Product Type:Alphanumeric Display Coprocessor Module
Compatible System:CIMPLICITY 90-ADS System
Microprocessor:80C188 Microprocessor
Number of Connectors:1
Number of Serial Ports:2
Soft Configuration:Supported

Slot filler module

Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693ACC310
Product Type:Filler module
Product Description:Slot cover
Ethernet:Supported
Slot width:Single slot
Supported Component:PLC
Rack location:Any slot
Application:Training Simulators
Supply Voltage:None
Item Name:Filler Module
Voltage Rating:120 VAC
No. of module installations:As needed
Amperage Rating:0.5 A

I/O BUS TERMINATOR PLUG

Series:Series 90-30
Part Number:IC693ACC307
Type:Baseplate I/O bus terminator plug
Resistor pack:Yes
I/O expansion cable length:15 meters (50 feet)
Expansion cable:Termination resistors at the end
Category:Automation and control
Compatible components:PLCs
Connector:25-pin

Input Simulator Module

Series:Series 90-30
Part Number:IC693ACC300
Type:I/O module
Number of points:8/16
Power source:DC
Output voltage range:18 to 30 Volts DC
Relative humidity:5 to 95% (non-condensing)
Shock:15 G at 11 milliseconds
Vibration:1 G at 9 to 150 Hertz

Cable Adapter

IC690ACC900
CABLE ADAPTER
RS485/422 TO RS432 CONVERTER
FOR HANDHELD PROGRAMMER

Profibus interface module

Series:Field Control
Manufacturer:GE Fanuc
Part Number:IC670PBI001
Product Type:Profibus Bus Interface
Rated Input Voltage:24 Volts DC
Voltage Range:18-30 Volts DC
Supported Protocols:Profibus
Input Power:7.7 watts
Power Dissipation:4.45 Watts
Addressing:via embedded DIP switches
Holdup Time:10 ms, maximum
Profibus topology:Linear bus topology