PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Honeywell
- Honewell FSC
- FC-TCNT11 51307928-176
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
FC-TCNT11 51307928-176 redundant FSC controller
Honeywell FC-TCNT11 51307928-176 is a redundant FSC controller for the Honeywell Safety Manager FSC systems. It is used to s300 redundant controller. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete redundant FSC controller
ACTUAL APPLICATIONS
Application context for FC-TCNT11 51307928-176
Manufacturer documentation places the Redundant Fsc Controller in practical safety applications. The three cases below describe different operating tasks in which FC-TCNT11 51307928-176 performs its documented product-family role with the configured companion equipment.
- 01 · POWER GENERATION
Balance burner management with Redundant Fsc process control
In the automation chain for the flame detectors, purge devices and fuel valves, FC-TCNT11 51307928-176 operates in its approved product-family role as a Redundant Fsc Controller. During light-off sequence, the system uses this function to prove purge and flame conditions before fuel admission, helping it prevent an unsafe burner start. - 02 · CHEMICAL & PETROCHEMICAL
Protect storage overfill prevention during high-high level demand
Within the independent level inputs and isolation elements, FC-TCNT11 51307928-176 handles its designated signal or control duty as a Redundant Fsc Controller. During high-high level demand, the system uses this function to stop transfer and close the independent inlet path, helping it prevent the vessel from exceeding its safe fill limit. - 03 · OIL & GAS
Sequence fire-and-gas response during validated detector voting
During operation of the detectors, alarms and mitigation outputs, FC-TCNT11 51307928-176 handles its designated signal or control duty as a Redundant Fsc Controller. During validated detector voting, the system uses this function to initiate the specified alarms and mitigation actions, helping it coordinate the documented emergency response.
Technical specifications for FC-TCNT11 51307928-176
-
Product ModelFC-TCNT11 51307928-176
-
Product Parametersredundant FSC controller
-
In stock1 unit
-
ManufacturerHoneywell
-
Model NumberFC-TCNT11
-
Part Number51307928-176
-
Controller TypeS300 redundant controller
-
Operating Voltage24 V DC
-
Power ConsumptionLess than 20 W typical
-
Operating Temperature-10 to +60 °C
-
Storage Temperature-40 to +85 °C
-
Controller ModeRedundant pair operation
-
Rack InterfaceFSC controller backplane
-
Network FunctionSafety-system communication
-
DiagnosticsSelf-test and status LEDs
-
Application LogicSafety control execution
-
ConfigurationFSC engineering database
-
MountingDedicated controller slot
-
Replacement RuleMatch both controller revisions
View all additional
Alternative Names
FC TCNT11 51307928 176
Honeywell Safety Manager FSC systems redundant FSC controller
Honeywell redundant FSC controller
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match FC-TCNT11 51307928-176 to the installed Honeywell Safety Manager FSC systems
Honeywell FC-TCNT11 51307928-176 is a redundant FSC controller used in the Honeywell Safety Manager FSC systems. Use FC-TCNT11 51307928-176 as the redundant FSC controller in the Honeywell Safety Manager FSC systems. Confirm controller type S300 redundant controller and the exact installed arrangement before connection.
Record the product label, rack interface (FSC controller backplane), cable identification, grounding and adjacent hardware before removing the installed unit. Confirm less than 20 w typical, -10 to +60 °c, the exact mechanical position and the approved system configuration before connection.
After installation, verify mounting (Dedicated controller slot), check diagnostics and test the affected function before returning the equipment to service. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: FC-TCNT11 51307928-176
- Product class: redundant FSC controller
- Family: Honeywell Safety Manager FSC systems
The Honeywell FC-TCNT11 51307928-176 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete FC-TCNT11 51307928-176 identity before exchange
Replace FC-TCNT11 51307928-176 only after matching the full article identity, redundant FSC controller, installed redundant pair operation and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, safety-system communication, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete match both controller revisions. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: FC-TCNT11 51307928-176
- Connection: Safety-system communication
- Test: Match both controller revisions
The Honeywell FC-TCNT11 51307928-176 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for FC-TCNT11 51307928-176
- Installation checks matched to Honeywell Safety Manager FSC systems
- Exact Honeywell identity required before service
Documentation for Honeywell FC-TCNT11 51307928-176 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weightConfirm before dispatch
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about FC-TCNT11 51307928-176
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which controller type must engineering verify for FC-TCNT11 51307928-176?
For FC-TCNT11 51307928-176, verify the documented controller type is S300 redundant controller and confirm the remaining nameplate limits before connection. -
How should maintenance document the rack interface before removing FC-TCNT11 51307928-176?
Photograph the rack interface, which is FSC controller backplane, plus terminal labels, cable routing, shields and adjacent hardware for FC-TCNT11 51307928-176. -
What does the part number value mean when sourcing FC-TCNT11 51307928-176?
The exact documented value for FC-TCNT11 51307928-176 is 51307928-176; use it with the full article code when checking the supplied configuration. -
Which power consumption limit applies during commissioning of FC-TCNT11 51307928-176?
Apply Less than 20 W typical for power consumption on FC-TCNT11 51307928-176; also confirm protection, polarity and the approved startup procedure. -
Can a distributor quote FC-TCNT11 51307928-176 from a shortened code?
No. Quote the complete identity FC-TCNT11 51307928-176, manufacturer, quantity, destination, product photos and required documentation scope. -
What receiving inspection is appropriate for the redundant FSC controller FC-TCNT11 51307928-176?
Inspect FC-TCNT11 51307928-176 for the full label, connector condition, revision markings, shipping damage and consistency with Honeywell Safety Manager FSC systems. -
Which system record should be retained after replacing FC-TCNT11 51307928-176?
Retain the incoming inspection, original connection record, configuration backup, measured results and service approval for FC-TCNT11 51307928-176. -
How is the restored redundant FSC controller function tested for FC-TCNT11 51307928-176?
Check status indications, diagnostics and the affected redundant FSC controller response, then record the final result against FC-TCNT11 51307928-176.
READY TO VERIFY YOUR PART?
Get a FC-TCNT11 51307928-176 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
