ABB

POWER SUPPLY

Model: DSQC505
Part Number: 3HAC4296-1
Type: Power Supply Unit
Input Voltage:AC 100-240V (50/60 Hz)
Output Voltage:24V DC
Output Power:Typically 100W or more (depends on load)
Current Rating:Around 4A at 24V DC
Efficiency: High efficiency for industrial use

I/O MAIN COMPUTER BOARD

Part Number: 3HAC14279-1/05
Type: I/O Main Computer Board
Voltage: Typically 24V DC
I/O Channels: Multiple digital and analog I/O channels

Bus cable DB15

Parameter:Value
Voltage Rating:24 V DC
Current Rating:≤ 3 A
Signal Type:DeviceNet™ communication + Power supply
Conductors:11 cores (twisted pairs)
Shielding:Double-layer braided copper shield
Impedance:120 Ω

DIN Rail Ruggedized Ethernet Switch

DIN Rail mounted managed Ethernet switch (wall mounting possible)
Metal housing
Up to 10 ports (electrical, optical or SFP cages)
Up to 3 GbE ports (electrical, SFP or Combo ports)
Multimode and Single Mode versions available
Huge variety on optical ports (e.g. SFP cages, SC, ST)
SFP’s in various versions available (MM, SM, single fibre)
Low voltage (18 - 60 VDC) or high voltage (48 - 320 VDC, 90 - 265 VAC) power supply
Redundant power supply possible
Typical power consumption: 12 - 21 W

Control Module

Part Number: UNS0118A-Z
Type: Control Module
Voltage: 24V DC
Operating Temperature: Typically -20°C to +60°C
Storage Temperature: -40°C to +85°C

Fiber Optic Repeater Module

RFO810
Up to 3 km
Supports HN800 or CW800 bus interfaces
Requires use of HBX01L/HBX01R for bus terminations
24V DC
20°C to +60°C

Module Card

Input Voltage:24 V DC (±20%)
Power Consumption:≤ 5 W 
Output Power:24 V DC to modules 
Communication Ports:1 × RS-485 
Data Rate:Up to 12 Mbps
Isolation :500 V AC 

Control Processor Module

Harmony-07
Control Processor Module
High-performance processing unit for real-time control and data processing
Supports industrial communication protocols such as Modbus, Profibus, Ethernet/IP
24V DC
-20°C to +60°C

PBA to HN800 Cable

SPK800-PBA1-01
Cable
1.0 Meter
PBA800 interface
HN800 device interface
Supports TER8x0 terminator to redundant PBA800 adapters for connection
Digital signal transmission

Terminal Module 

TRL810K2
Terminal Module
8 channels
Analog or digital input/output, depending on the specific configuration
Typically 24V DC or as required by the system
20°C to +60°C

Digital Output Module

NTRO05-A
Digital Output Module
5 channels
Relay output or transistor output
4 V DC or 120 V AC output, depending on configuration
Maximum output current per channel: 1 A
24 V DC power supply

Termination Loop Cable

NKSD01-15
Termination Loop Cable
Shielded twisted pair or other cable types suitable for industrial applications
15 meters
-20°C to +60°C

SOE clock module

Input Voltage:24 V DC
Power Consumption:≤ 8 W 
Time Sync Input:IRIG-B (modulated/dc level)
Signal Voltage:TTL/RS-422 compatible (0–5 V DC)
Accuracy:±1 ms 
Time Resolution:1 ms
Isolation:1500 V AC

SOE Master Module

SPSEM11
SOE Master Module
Sequence of Events Recording
Accurate to millisecond level
Typically supports Ethernet, MODBUS, or other industrial protocols
Operating temperature range: -20°C to +60°C

Power Entry Panel Dual Chassis

PHARPSPEP21013
Power Entry Panel
Dual Chassis Design
Typically supports AC or DC input, depending on the application
Appropriate current based on load requirements

Termination Cable

Model: NKHS03-15
Type: Termination Cable
Cable Length: 15 meters
Interface Type: Compatible with ABB system modules

Analog Input Terminal Board

Model: NTRO12-A
Type: Analog Input Terminal Unit
Signal Type: High-Level Analog Signals
Number of Channels: 12
Product Type: Module_Termination_Unit

Analog Input Terminal Board

Model: NTAI05-A
Type: C
Number of Channels: 16 Channels
Signal Type: High-Level Analog Signals
Product Type: Module Termination Unit

ACS800 R2 to R6 STO Frequency Converter

Safety Category:Category 3 (EN 954-1) 
Response Time:≤ 20 ms
Supply Voltage:24 V DC ±10%
Power Consumption:≤ 2 W
Input Signal:24 V DC (Pulse test: 0.5 Hz, 1 ms)
Input Current:6 mA per channel
Isolation Reinforced isolation : 500 V AC

IGCT Module

Blocking Voltage 4500 V DC
Reverse Voltage:30 V 
Max RMS Current:4000 A
Peak Surge Current :32 kA
Turn-On Time: ≤ 3 µs
Turn-Off Time: ≤ 5 µs
Switching Loss: ≤ 15 kJ/s at 500 Hz

Inverter Filter Plate

Rated Voltage:380–480 V AC, 3-phase (±10%)
Rated Current:100 A (at 40°C ambient)
Frequency:50/60 Hz
Leakage Current:< 5 mA (at 480 V AC)
Insulation Resistance:> 100 MΩ (500 V DC)
Dielectric Strength:3000 V AC

CONVERTER POWER BOARD

3-phase AC: 380–480 V AC
DC Bus Voltage:520–720 V DC
Power Rating:Typically 1–50 kW
Operating Temperature:-10°C to +50°C
Storage Temperature:-40°C to +85°C

CANopen Adapter Module

Product Type:CANopen Slave Interface Module
Catalog Number:160-NCAN-02C
Compatible Networks:CANopen
Power Supply:24V DC (±10%), 120 mA typical
Terminals:5-pin removable screw terminal

Memory Board 8MB

Memory Type:Fast Page Mod
Battery Backup:Integrated 3.6V Lithium Battery 
Capacity:8 MB SDRAM
Data Retention:≥72 hours 
Interface:96-pin DIN 41612 connector (Type C)

Communication Module

Order Code:3BHE019958R0101
Functional Designation:UA D206 A
Power Supply:5 V DC
Consumption: 500 mA (max)
Data Rate:300 bps – 115.2 kbps (per port)
Isolation:500 V AC