ABB

Redundant Processor Unit

Input Voltage: 24V DC (±10%)
Power Consumption: 20W (typical)
Processor: Dual-core 1.2 GHz PowerPC
RAM: 1GB DDR3
Ethernet: 2x 10/100/1000 Mbps (RJ45)
Execution Speed: 0.1ms Boolean, 1ms PID loop

Digital output module

16 channels for 24 V d.c.
Redundant or single configuration
Output status indicators
Advanced on-board diagnostics
Degraded mode for normally energized channels 

Control Module

I/O Capacity:16 digital inputs (24V DC)
Processing Speed: 1ms scan time (typical)
Memory: 64KB SRAM 
Power Supply:24V DC (±10%)
Consumption: 5W (typical)
Isolation:1500V AC (channel-to-channel)

Circuit Board

Input Voltage: 24V DC (±10%)
Power Consumption: 5W–10W (typical)
Isolation: 500V AC (channel-to-bus)
Processor: DSP or FPGA-based 
Flash: 8MB–16MB
Digital I/O: 8–16 channels
DeviceNet or Profibus
RS-232/RS-485

Overvoltage and undervoltage relay

Rated voltage:250 V ac/dc.
Carry continuously 5 A
Make and carry for 0.5 s 30 A
Make and carry for 3 s 15 A
Terminals 65-66, 68-69

AIN-120 Analog Input Block

AIN-120 Analog Input Block
Input Channels: 16 single-ended/8
Voltage: ±10V, 0-10V, 1-5V
Current: 0-20mA, 4-20mA
Resolution: 16-bit (0.0015% of span)
Supply Voltage: 24V DC (±10%)
Power Consumption: 3.5W (typical)
Inrush Current: <2A for 20ms
Sampling Rate: 10ms/channel (max)

Power drive board

Input Voltage: 3-phase, 380-480V AC
Output Current: Up to 30A
Switching Frequency: 2-16 kHz

Circuit Board

Operating Voltage: 24V DC (±10%)
Power Consumption: 15W typical
Signal Isolation: 2500V AC 
Switching Frequency: Up to 20kHz 
Gate Drive Outputs:±15V gate drive voltage

AOT 150 Analog Output Module

Output Channels: 16 single-ended
Voltage: 0-10V, ±10V
Current: 4-20mA, 0-20mA
Supply Voltage: 24V DC (±10%)
Power Consumption: 6W (typical), 8W (max)
Inrush Current: <2A for 20ms

Symphony Plus Bridge Controller Module

SPBRC410
Controller with Modbus TCP Interface
BRIDGE CONTROLLER
HARMONY RACK / SYMPHONY PLUS
W/ MODBUS TCP INTERFACE
INFI90 / BRC410 / SPBRC41000000

Digital Output Module

HARMONY BLOCK DIGITAL OUTPUT MODULE
3 AMP
24VDC
240VAC
16 OUTPUTS
FUSING/ON BOARD ELECTROMECHANICAL RELAYS
SPDT

AIN-220 Analog Input Module

Series: Harmony/800xA System
Model No.: P-HB-AIN-2200C100
Type: High-Density Analog Input Module
Voltage: ±10V, 0-10V, 1-5V
Current: 0-20mA, 4-20mA
Resolution: 16-bit (0.0015% of span)
Common Mode Rejection: >120dB @ 50/60Hz
Normal Mode Rejection: >60dB @ 50/60Hz

Power Board

Input Voltage:24V DC (±10%) or 115/230V AC
Output Voltages:+5V, ±15V, +24V DC
Power Capacity:100W (max)
Inrush Current:15A (for 20ms at 230V AC)
Efficiency:>90% (at full load)
Fiber-Optic Signal Isolation :2500V AC

Drive Board +IGBT Module

Voltage Rating:1700V
Current Rating:450A (continuous)
Max Junction Temp.:150°C
Switching Frequency:Up to 5kHz
Gate Drive Voltage:+15V/-5V
Isolation Voltage:2500V RMS
Power Consumption:25W (typical)
Protection Response:<2μs (short-circuit)

Pulse Transformation Board

Power Supply:24 V DC 
Differential: ±12 V.
Power consumption: < 5 W
Single-ended: 0–24 V
Output Voltage:
TTL: 0–5 V.
HTL: 0–24 V

Drive power board

Input Voltage:3-phase 380-480V AC (±10%)
Output Voltages:+24V DC (control)
Power Capacity:500W (continuous)
Switching Frequency:20kHz (PWM)
Efficiency:>92% (at full load)

Control board

Input Voltage:24V DC (±10%)
Power Consumption;25W (typical)
Isolation :1500V AC (field to logic)
Vector control
Torque/speed regulation
PID controllers
Communication;Ports 2x Ethernet, 1x RS-485

Interface Board

Input Voltage:24V DC (±10%)
Power Consumption:8W (typical)
Isolation Voltage:1500V AC (channel-to-channel)
Communication Speed:Up to 1Mbps
Signal Channels:16 digital I/O

Interface Board

Input Voltage:24V DC (±10%)
Power Consumption:12W (max)
Isolation Voltage:2500V AC (channel-to-bus)
Input Current :5mA @ 24V DC
Voltage Range:0-30V DC

PCB Board

Input Voltage:24V DC (±10%)
Power Consumption:15W (typical), 20W (max)
Isolation:1500V AC 
Processor:32-bit RISC 
Clock Speed:800MHz
Memory:512MB DDR3 RAM, 1GB Flash
Real-Time Clock:Battery-backed (CR2032)
Communication Interfaces:2x Ethernet, 1x RS-485

AIR FLOW SENSOR

AIR FLOW SENSOR
0.04 AMP
24 V

IGBT Inverter Module

Voltage Rating:1200V
Current Rating:300A (continuous)
Max Junction Temp.:150°C
Switching Frequency:Up to 20kHz
Gate Drive Voltage:+15V/-5V
Isolation Voltage:2500V RMS
Protection Features:DESAT, UVLO, OT
Response Time:<2μs (short-circuit)

Cooling Fan

Voltage Rating:24V DC (±10%)
Current Draw :0.8A (max)
Power Consumption:19.2W
Startup Voltage:≤18V DC
Airflow:340 CFM (5.7 m³/min)
Static Pressure:120 Pa
Speed:3200 RPM (±10%)
Noise Level:55 dB(A) at 1m

Input/Output Unit

Power Supply:24V DC (±10%)
Power Consumption:8W (typical)
Response Time:<1ms (input), <0.5ms (output)
Surge Protection:30V DC
Channels:16x digital
Voltage Range:24V DC (±10%)
Current Rating:5mA (min)
Isolation :1500V AC 

PCB CARD

Input Voltage:24V DC (±10%) 
Power Consumption:15W (typical)
Processor:32-bit RISC @ 800MHz
Memory:512MB RAM, 2GB Flash
Real-Time Clock:Battery-backed (10-year life)
I/O Capacity:Supports up to 512 I/O points