PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Advant OCS and Advant-800xA
- 1KHL016009R0001 G4AK
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
1KHL016009R0001 G4AK programmable controller unit
ABB 1KHL016009R0001 G4AK is a programmable controller unit for the ABB industrial control systems. It is used to abb industrial control systems. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete programmable controller unit
ACTUAL APPLICATIONS
Application context for 1KHL016009R0001 G4AK
Manufacturer documentation places the Programmable Controller Unit in practical process applications. The three cases below describe different operating tasks in which 1KHL016009R0001 G4AK performs its documented product-family role with the configured companion equipment.
- 01 · WATER & WASTEWATER
Stabilize chemical dosing with Programmable Controlle
During operation of the metering pumps and contact tanks, 1KHL016009R0001 G4AK provides its specified system function as a Programmable Controller Unit. During dose-setpoint correction, the system uses this function to match reagent flow to the measured process load, helping it keep treatment chemistry inside its operating target. - 02 · FOOD & BEVERAGE
Align recipe mixing with Programmable Controlle
Inside the mixers and ingredient skids, 1KHL016009R0001 G4AK provides its specified system function as a Programmable Controller Unit. During recipe changeover, the system uses this function to sequence material transfers and equipment permissives, helping it preserve the verified batch state. - 03 · OIL & GAS
Govern pipeline pumping with Programmable Controlle
For the coordinated operation of the mainline pumps and block valves, 1KHL016009R0001 G4AK provides its specified system function as a Programmable Controller Unit. During equipment switchover, the system uses this function to align pump duty with pressure and flow demand, helping it maintain controlled movement through the line.
Technical specifications for 1KHL016009R0001 G4AK
-
Product Model1KHL016009R0001 G4AK
-
Product Parametersprogrammable controller unit
-
In stock1 unit
-
ManufacturerABB
-
Exact Article Code1KHL016009R0001 G4AK
-
Product FamilyABB Advant OCS and Advant-800xA
-
Component TypeProgrammable Controller Unit
-
System ClassDCS System
-
Mounting FormatPlug-in control rack
-
System InterfaceManufacturer backplane bus
-
Control Supply24 V DC control class
-
Channel CapacityModel-defined channel set
-
Signal StandardSystem-specific I/O levels
-
Electrical IsolationIsolated field circuits
-
Operating Temperature-25°C to +55°C (60°C with derating)
-
Protection LevelIP20 installed equipment
-
Configuration ToolManufacturer engineering software
-
Commissioning TestI/O and diagnostic functional test
View all additional
Alternative Names
1KHL016009R0001 G4AK
ABB industrial control systems programmable controller unit
ABB programmable controller unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 1KHL016009R0001 G4AK to the installed ABB industrial control systems
ABB 1KHL016009R0001 G4AK is a programmable controller unit used in the ABB industrial control systems. Use 1KHL016009R0001 G4AK in the specified ABB industrial control systems position with the documented supply, signal range and system interface. Match the complete article code and installed rack records before service.
Record terminal numbers, connector keying, rack position, shields and protective earth for 1KHL016009R0001 G4AK. Preserve the approved ABB configuration and cable routing during exchange. Confirm dcs system, plug-in control rack, the exact mechanical position and the approved system configuration before connection.
After fitting 1KHL016009R0001 G4AK, check power and module diagnostics, then test the affected I/O, communication, controller or measurement function at a safe operating point and record acceptance. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 1KHL016009R0001 G4AK
- Product class: programmable controller unit
- Family: ABB industrial control systems
The ABB 1KHL016009R0001 G4AK requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 1KHL016009R0001 G4AK identity before exchange
Replace 1KHL016009R0001 G4AK only after matching the full article identity, programmable controller unit, installed 24 v dc control class and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, system-specific i/o levels, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete i/o and diagnostic functional test. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 1KHL016009R0001 G4AK
- Connection: System-specific I/O levels
- Test: I/O and diagnostic functional test
The ABB 1KHL016009R0001 G4AK requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 1KHL016009R0001 G4AK
- Installation checks matched to ABB industrial control systems
- Exact ABB identity required before service
Documentation for ABB 1KHL016009R0001 G4AK must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size32 × 24 × 12 cm
-
Shipping weight0.4 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 1KHL016009R0001 G4AK
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should technicians confirm the signal range for 1KHL016009R0001 G4AK?
Compare the connected field circuit with System-specific I/O levels and use calibrated test equipment before applying signals to 1KHL016009R0001 G4AK. -
Which electrical values must maintenance check on 1KHL016009R0001 G4AK?
Confirm 24 V DC control class, System-specific I/O levels, Isolated field circuits and protective earth before connecting 1KHL016009R0001 G4AK. -
What commissioning result releases 1KHL016009R0001 G4AK for service?
For 1KHL016009R0001 G4AK, complete the I/O and diagnostic functional test, confirm normal diagnostics and record the affected equipment response. -
What companion hardware must match 1KHL016009R0001 G4AK?
Verify the rack, controller, power supply, bus coupler, terminal assembly and adjacent modules documented for 1KHL016009R0001 G4AK. -
What installed-system evidence is needed before replacing 1KHL016009R0001 G4AK?
Archive the rack drawing, connection photographs, project or configuration backup and current diagnostics before removing 1KHL016009R0001 G4AK. -
Can a visually similar module directly replace 1KHL016009R0001 G4AK?
Physical similarity is insufficient; a replacement for 1KHL016009R0001 G4AK must match the full code, family, interface, signal range and approved configuration. -
Which diagnostics should be reviewed after installing 1KHL016009R0001 G4AK?
Review power, communication and module status indications for 1KHL016009R0001 G4AK, then clear only faults resolved by the completed work. -
Which article-code details should engineering verify for 1KHL016009R0001 G4AK?
For 1KHL016009R0001 G4AK, match the complete ABB article code, ABB industrial control systems, component type and installed position.
READY TO VERIFY YOUR PART?
Get a 1KHL016009R0001 G4AK quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
