PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Advant OCS and Advant-800xA
- 3BHE022293R0101 PCD232 A106
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3BHE022293R0101 PCD232 A106 communications i/o module
ABB 3BHE022293R0101 PCD232 A106 is a communications i/o module in the ABB Advant OCS and Advant-800xA. The article-specific data identifies its control role, communication or signal interface and installed system compatibility. Confirm the complete nameplate, electrical class, revision, companion equipment and controlled configuration before ordering.
BEFORE YOU BUY
Confirm the complete communications i/o module
ACTUAL APPLICATIONS
Application context for 3BHE022293R0101 PCD232 A106
Manufacturer documentation places the communications i/o module in practical process applications. The three cases below describe different operating tasks in which 3BHE022293R0101 PCD232 A106 performs its documented product-family role with the configured companion equipment.
-
01 · PULP & PAPER
Support paper-machine draws with Communications I
As part of the press rolls and sectional drives, 3BHE022293R0101 PCD232 A106 provides its specified system function as a communications i/o module. During sheet threading, the system uses this function to maintain speed ratios between machine sections, helping it protect sheet tension during acceleration. -
02 · CHEMICAL & PETROCHEMICAL
Maintain reactor charging with Communications I
During operation of the feed valves, vessels and agitators, 3BHE022293R0101 PCD232 A106 provides its specified system function as a communications i/o module. During batch initiation, the system uses this function to sequence the material path against vessel readiness, helping it begin the reaction from a verified state. -
03 · FOOD & BEVERAGE
Route clean-in-place transfer with Communications I
During operation of the CIP supply and return headers, 3BHE022293R0101 PCD232 A106 operates in its approved product-family role as a communications i/o module. During sanitation transition, the system uses this function to coordinate valve paths and pump availability, helping it complete sanitation without cross-routing product.
Technical specifications for 3BHE022293R0101 PCD232 A106
-
Product Model3BHE022293R0101 PCD232 A106
-
Product Parameterscommunications i/o module
-
In stock1 unit
-
ManufacturerABB
-
Module Supply24 V DC
-
Isolation500 V AC
-
Operating Temperature0°C to +55°C
-
Storage Temperature-40°C to +70°C
-
Relative Humidity5 - 95% RH (non-condensing)
-
PC D232 APEC80-CIO
-
Exact Article Code3BHE022293R0101 PCD232 A106
-
Board DesignationPCD232 A106
-
Product FamilyABB Advant OCS and Advant-800xA
-
Component TypeCommunications I/O Module
-
Assembly ClassABB PCB assembly
-
System InterfaceABB Advant OCS and Advant-800xA control interface
-
Control SupplyDocumented rack control supply
-
Connector InterfaceKeyed ABB board connectors
-
Installation FormatPlug-in control board
View all additional
Alternative Names
3BHE022293R0101 PCD232 A106
ABB communications i/o module
ABB Advant OCS and Advant-800xA communications i/o module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3BHE022293R0101 PCD232 A106 to the installed ABB Advant OCS and Advant-800xA
ABB 3BHE022293R0101 PCD232 A106 is a communications i/o module for the ABB Advant OCS and Advant-800xA. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare storage temperature (-40°C to +70°C), relative humidity (5 - 95% RH (non-condensing)) and pc d232 a (PEC80-CIO) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3BHE022293R0101 PCD232 A106
- Product class: communications i/o module
- Family: ABB Advant OCS and Advant-800xA
The ABB 3BHE022293R0101 PCD232 A106 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3BHE022293R0101 PCD232 A106 identity before exchange
Replace 3BHE022293R0101 PCD232 A106 only after matching the complete article code, communications i/o module, installed ABB Advant OCS and Advant-800xA role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3BHE022293R0101 PCD232 A106
- Product class: communications i/o module
- Family check: ABB Advant OCS and Advant-800xA
The ABB 3BHE022293R0101 PCD232 A106 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical data prepared for 3BHE022293R0101 PCD232 A106
- Product family: ABB Advant OCS and Advant-800xA
- Exact ABB identity required before service
Documentation for ABB 3BHE022293R0101 PCD232 A106 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 30 × 6.3 cm
-
Shipping weight1.65 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3BHE022293R0101 PCD232 A106
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which connections must be recorded before removing 3BHE022293R0101 PCD232 A106?
Photograph connector keying, terminal references, cable destinations, shields, earth points and neighboring assemblies used by 3BHE022293R0101 PCD232 A106. -
Which configuration records should be backed up before replacing 3BHE022293R0101 PCD232 A106?
Back up the hardware list, parameter set, controller project or converter configuration that identifies 3BHE022293R0101 PCD232 A106. -
What records should remain with 3BHE022293R0101 PCD232 A106 after service?
Keep receiving inspection, configuration backup, connection record, measured results and final acceptance with the 3BHE022293R0101 PCD232 A106 service file. -
What receiving inspection is required for 3BHE022293R0101 PCD232 A106?
Inspect the 3BHE022293R0101 PCD232 A106 label, housing, terminals, connectors and packaging; record any damage or unreadable identification. -
What cabinet conditions should be checked for 3BHE022293R0101 PCD232 A106?
Check secure mounting, ventilation, contamination, clearance and access around 3BHE022293R0101 PCD232 A106 before service. -
Which photographs help a distributor source 3BHE022293R0101 PCD232 A106?
Provide clear photos of the complete 3BHE022293R0101 PCD232 A106 label, revision marks, connectors and installed equipment position. -
How should a distributor quote the exact 3BHE022293R0101 PCD232 A106 assembly?
Quote ABB 3BHE022293R0101 PCD232 A106, quantity, product family, visible revision marks and the destination equipment in the request. -
Which ABB system documents apply to 3BHE022293R0101 PCD232 A106?
Use ABB documentation for ABB Advant OCS and Advant-800xA and confirm that the exact 3BHE022293R0101 PCD232 A106 assembly is covered by the hardware scope.
READY TO VERIFY YOUR PART?
Get a 3BHE022293R0101 PCD232 A106 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
