PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3BSC690104R2 pp345 process panel
ABB 3BSC690104R2 is a pp345 process panel in the ABB Advant OCS and Advant-800xA. The article-specific data identifies its control role, communication or signal interface and installed system compatibility. Confirm the complete nameplate, electrical class, revision, companion equipment and controlled configuration before ordering.
BEFORE YOU BUY
Confirm the complete pp345 process panel
ACTUAL APPLICATIONS
Application context for 3BSC690104R2
Manufacturer documentation places the pp345 process panel in practical process applications. The three cases below describe different operating tasks in which 3BSC690104R2 performs its documented product-family role with the configured companion equipment.
-
01 · CHEMICAL & PETROCHEMICAL
Track reactor charging with Pp345 Process process control
Across the feed valves, vessels and agitators, 3BSC690104R2 operates in its approved product-family role as a pp345 process panel. During batch initiation, the system uses this function to sequence the material path against vessel readiness, helping it begin the reaction from a verified state. -
02 · OIL & GAS
Track terminal transfer during transfer start
Within the loading pumps and metering runs, 3BSC690104R2 provides its specified system function as a pp345 process panel. During transfer start, the system uses this function to prove the flow path before product movement, helping it start transfer with the intended containment path. -
03 · PULP & PAPER
Sequence reel and winder operation with Pp345 Process
In the automation chain for the reels, slitters and winding drums, 3BSC690104R2 supports the configured automation role as a pp345 process panel. During roll change, the system uses this function to synchronize winding torque with roll diameter, helping it build a roll with controlled tension.
Technical specifications for 3BSC690104R2
-
Product Model3BSC690104R2
-
Product Parameterspp345 process panel
-
In stock1 unit
-
ManufacturerABB
-
Exact Article Code3BSC690104R2
-
Product FamilyABB Advant OCS and Advant-800xA
-
Component TypePp345 Process Panel
-
Assembly ClassABB PCB assembly
-
System InterfaceABB Advant OCS and Advant-800xA control interface
-
Control SupplyDocumented rack control supply
-
Connector InterfaceKeyed ABB board connectors
-
Installation FormatPlug-in control board
-
Signal DomainControl and diagnostic signals
-
Service PositionDocumented rack slot
-
Configuration BasisInstalled ABB hardware list
-
Replacement BasisExact article and board revision
-
Protective CheckESD and protective-earth control
-
Commissioning CheckPower-up diagnostics and function test
-
Maintenance Identity3BSC690104R2 controlled service identity
View all additional
Alternative Names
3BSC690104R2
ABB pp345 process panel
ABB Advant OCS and Advant-800xA pp345 process panel
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3BSC690104R2 to the installed ABB Advant OCS and Advant-800xA
ABB 3BSC690104R2 is a pp345 process panel for the ABB Advant OCS and Advant-800xA. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare assembly class (ABB PCB assembly), system interface (ABB Advant OCS and Advant-800xA control interface) and control supply (Documented rack control supply) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3BSC690104R2
- Product class: pp345 process panel
- Family: ABB Advant OCS and Advant-800xA
The ABB 3BSC690104R2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3BSC690104R2 identity before exchange
Replace 3BSC690104R2 only after matching the complete article code, pp345 process panel, installed ABB Advant OCS and Advant-800xA role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3BSC690104R2
- Product class: pp345 process panel
- Family check: ABB Advant OCS and Advant-800xA
The ABB 3BSC690104R2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 3BSC690104R2
- Product family: ABB Advant OCS and Advant-800xA
- Exact ABB identity required before service
Documentation for ABB 3BSC690104R2 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size28 × 22 × 10 cm
-
Shipping weight2.90 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3BSC690104R2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which ABB system documents apply to 3BSC690104R2?
Use ABB documentation for ABB Advant OCS and Advant-800xA and confirm that the exact 3BSC690104R2 assembly is covered by the hardware scope. -
How should the signal or power interface for 3BSC690104R2 be verified?
Compare every connected circuit with the controlled drawing and verify the approved electrical class before connecting 3BSC690104R2. -
Which electrical checks apply before energising 3BSC690104R2?
Confirm the documented supply, interface, insulation condition and protective earth before energising 3BSC690104R2. -
What commissioning evidence is needed after fitting 3BSC690104R2?
Record power-up status, diagnostics, the affected function test and final maintenance approval for 3BSC690104R2. -
Which companion hardware must match 3BSC690104R2?
Verify the documented rack, control unit, power stage, connector assembly and adjacent hardware paired with 3BSC690104R2. -
What drawings should engineering review before installing 3BSC690104R2?
Review the installed hardware list, cabinet drawing, connection diagram and controlled ABB Advant OCS and Advant-800xA service documentation for 3BSC690104R2. -
How is interchangeability assessed for 3BSC690104R2?
Physical similarity is insufficient; 3BSC690104R2 must match the complete article identity, interface and approved system configuration. -
What diagnostics should maintenance review for 3BSC690104R2?
Review power, communication, gate, I/O or controller status relevant to 3BSC690104R2, then record resolved alarms.
READY TO VERIFY YOUR PART?
Get a 3BSC690104R2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
