PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3BUR000118R15 dcn cable assembly 15m 49
ABB 3BUR000118R15 is a dcn cable assembly 15m 49 in the ABB Advant OCS and Advant-800xA. It is used to provide the documented electrical or communication connection between compatible components.
Its documented configuration includes assembly class of ABB PCB assembly, system interface of ABB Advant OCS and Advant-800xA control interface, control supply of Documented rack control supply, and connector interface of Keyed ABB board connectors. During operation, the dcn cable assembly 15m 49 performs its assigned dcn cable assembly 15m 49 function through the documented power, signal and communication interfaces.
Its documented configuration includes assembly class of ABB PCB assembly, system interface of ABB Advant OCS and Advant-800xA control interface, control supply of Documented rack control supply, and connector interface of Keyed ABB board connectors. During operation, the dcn cable assembly 15m 49 performs its assigned dcn cable assembly 15m 49 function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete dcn cable assembly 15m 49
ACTUAL APPLICATIONS
Where 3BUR000118R15 Fits Across Major Industry Sectors
Uses span water, energy and mining, subject to verified compatibility, operating conditions and project requirements.
-
01 · WATER & WASTEWATER
Drinking Water Supply and Municipal Wastewater Treatment
Drinking water treatment and supply for municipal utility services.Municipal wastewater treatment and sanitation for urban service areas. -
02 · RENEWABLE ENERGY
Solar Energy Production and Wind Power Generation
Solar energy generation for renewable electricity and thermal production.Wind energy generation supporting renewable electricity supply and distribution. -
03 · MINING & MINERALS
Mineral Resource Extraction and Industrial Raw Material Processing
Mineral resource extraction for industrial production and material supply.Mineral processing and preparation for downstream industrial manufacturing operations.
Technical specifications for 3BUR000118R15
-
Product Model3BUR000118R15
-
Product Parametersdcn cable assembly 15m 49
-
In stock1 unit
-
ManufacturerABB
-
Exact Article Code3BUR000118R15
-
Product FamilyABB Advant OCS and Advant-800xA
-
Component TypeDcn Cable Assembly 15M 49
-
Assembly ClassABB PCB assembly
-
System InterfaceABB Advant OCS and Advant-800xA control interface
-
Control SupplyDocumented rack control supply
-
Connector InterfaceKeyed ABB board connectors
-
Installation FormatPlug-in control board
-
Signal DomainControl and diagnostic signals
-
Service PositionDocumented rack slot
-
Configuration BasisInstalled ABB hardware list
-
Replacement BasisExact article and board revision
-
Protective CheckESD and protective-earth control
-
Commissioning CheckPower-up diagnostics and function test
-
Maintenance Identity3BUR000118R15 controlled service identity
View all additional
Alternative Names
3BUR000118R15
ABB dcn cable assembly 15m 49
ABB Advant OCS and Advant-800xA dcn cable assembly 15m 49
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3BUR000118R15 to the installed ABB Advant OCS and Advant-800xA
ABB 3BUR000118R15 is a dcn cable assembly 15m 49 for the ABB Advant OCS and Advant-800xA. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare assembly class (ABB PCB assembly), system interface (ABB Advant OCS and Advant-800xA control interface) and control supply (Documented rack control supply) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3BUR000118R15
- Product class: dcn cable assembly 15m 49
- Family: ABB Advant OCS and Advant-800xA
The ABB 3BUR000118R15 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3BUR000118R15 identity before exchange
Replace 3BUR000118R15 only after matching the complete article code, dcn cable assembly 15m 49, installed ABB Advant OCS and Advant-800xA role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3BUR000118R15
- Product class: dcn cable assembly 15m 49
- Family check: ABB Advant OCS and Advant-800xA
The ABB 3BUR000118R15 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 3BUR000118R15
- Product family: ABB Advant OCS and Advant-800xA
- Exact ABB identity required before service
Documentation for ABB 3BUR000118R15 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size24 × 18 × 6 cm
-
Shipping weight0.50 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3BUR000118R15
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which companion hardware must match 3BUR000118R15?
Verify the documented rack, control unit, power stage, connector assembly and adjacent hardware paired with 3BUR000118R15. -
What drawings should engineering review before installing 3BUR000118R15?
Review the installed hardware list, cabinet drawing, connection diagram and controlled ABB Advant OCS and Advant-800xA service documentation for 3BUR000118R15. -
How is interchangeability assessed for 3BUR000118R15?
Physical similarity is insufficient; 3BUR000118R15 must match the complete article identity, interface and approved system configuration. -
What diagnostics should maintenance review for 3BUR000118R15?
Review power, communication, gate, I/O or controller status relevant to 3BUR000118R15, then record resolved alarms. -
Which nameplate fields identify 3BUR000118R15 for a maintenance replacement?
Match the complete ABB article code 3BUR000118R15, its board or device designation, product family and installed position. -
Which connections must be recorded before removing 3BUR000118R15?
Photograph connector keying, terminal references, cable destinations, shields, earth points and neighboring assemblies used by 3BUR000118R15. -
Which configuration records should be backed up before replacing 3BUR000118R15?
Back up the hardware list, parameter set, controller project or converter configuration that identifies 3BUR000118R15. -
What records should remain with 3BUR000118R15 after service?
Keep receiving inspection, configuration backup, connection record, measured results and final acceptance with the 3BUR000118R15 service file.
READY TO VERIFY YOUR PART?
Get a 3BUR000118R15 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
3BUR000118R15dcn cable assembly 15m 49Manufacturer: ABBView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
