PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Advant OCS and Advant-800xA
- ABB Advant AC500
- 1SAY130110R0100 07SS91C2
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
1SAY130110R0100 07SS91C2 industrial control board
ABB 1SAY130110R0100 07SS91C2 is a industrial control board for the ABB Advant AC500. It is used to abb Advant AC500. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete industrial control board
ACTUAL APPLICATIONS
Application context for 1SAY130110R0100 07SS91C2
Manufacturer documentation places the Industrial Control Board in practical process applications. The three cases below describe different operating tasks in which 1SAY130110R0100 07SS91C2 performs its documented product-family role with the configured companion equipment.
- 01 · POWER GENERATION
Coordinate generator excitation with Industrial Control
In the automation chain for the field circuits and voltage regulation, 1SAY130110R0100 07SS91C2 serves its documented function as a Industrial Control Board. During load change, the system uses this function to adjust the assigned regulation path from operating feedback, helping it hold the electrical variable at its commanded target. - 02 · OIL & GAS
Stabilize compressor-train operation with Industrial Control
Across the compressors, seals and antisurge loops, 1SAY130110R0100 07SS91C2 performs its assigned control role as a Industrial Control Board. During throughput change, the system uses this function to coordinate the control and protection signals for the train, helping it keep the rotating train inside its operating envelope. - 03 · CHEMICAL & PETROCHEMICAL
Govern utility distribution during utility constraint
Within the steam, cooling and instrument-air headers, 1SAY130110R0100 07SS91C2 provides its specified system function as a Industrial Control Board. During utility constraint, the system uses this function to prioritize process users from measured demand, helping it protect production continuity during the constraint.
Technical specifications for 1SAY130110R0100 07SS91C2
-
Product Model1SAY130110R0100 07SS91C2
-
Product Parametersindustrial control board
-
In stock1 unit
-
ManufacturerABB
-
Exact Article Code1SAY130110R0100 07SS91C2
-
Product FamilyABB Advant AC500
-
Component TypeIndustrial Control Board
-
System ClassDCS System
-
Mounting FormatPlug-in control rack
-
System InterfaceAC500 backplane bus
-
Control Supply24 V DC controller supply
-
Channel CapacityModel-defined channel set
-
Signal StandardSystem-specific I/O levels
-
Electrical IsolationIsolated field circuits
-
Operating Temperature-20°C to +70°C
-
Protection LevelIP20 control cabinet
-
Configuration ToolABB Automation Builder
-
Commissioning TestI/O and diagnostic functional test
View all additional
Alternative Names
1SAY130110R0100 07SS91C2
ABB Advant AC500 industrial control board
ABB industrial control board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 1SAY130110R0100 07SS91C2 to the installed ABB Advant AC500
ABB 1SAY130110R0100 07SS91C2 is a industrial control board used in the ABB Advant AC500. Use 1SAY130110R0100 07SS91C2 in the specified ABB Advant AC500 position with the documented supply, signal range and system interface. Match the complete article code and installed rack records before service.
Record terminal numbers, connector keying, rack position, shields and protective earth for 1SAY130110R0100 07SS91C2. Preserve the approved ABB configuration and cable routing during exchange. Confirm dcs system, plug-in control rack, the exact mechanical position and the approved system configuration before connection.
After fitting 1SAY130110R0100 07SS91C2, check power and module diagnostics, then test the affected I/O, communication, controller or measurement function at a safe operating point and record acceptance. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 1SAY130110R0100 07SS91C2
- Product class: industrial control board
- Family: ABB Advant AC500
The ABB 1SAY130110R0100 07SS91C2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 1SAY130110R0100 07SS91C2 identity before exchange
Replace 1SAY130110R0100 07SS91C2 only after matching the full article identity, industrial control board, installed 24 v dc controller supply and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, system-specific i/o levels, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete i/o and diagnostic functional test. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 1SAY130110R0100 07SS91C2
- Connection: System-specific I/O levels
- Test: I/O and diagnostic functional test
The ABB 1SAY130110R0100 07SS91C2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 1SAY130110R0100 07SS91C2
- Installation checks matched to ABB Advant AC500
- Exact ABB identity required before service
Documentation for ABB 1SAY130110R0100 07SS91C2 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 30 × 6.3 cm
-
Shipping weight1.5 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 1SAY130110R0100 07SS91C2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What companion hardware must match 1SAY130110R0100 07SS91C2?
Verify the rack, controller, power supply, bus coupler, terminal assembly and adjacent modules documented for 1SAY130110R0100 07SS91C2. -
What installed-system evidence is needed before replacing 1SAY130110R0100 07SS91C2?
Archive the rack drawing, connection photographs, project or configuration backup and current diagnostics before removing 1SAY130110R0100 07SS91C2. -
Can a visually similar module directly replace 1SAY130110R0100 07SS91C2?
Physical similarity is insufficient; a replacement for 1SAY130110R0100 07SS91C2 must match the full code, family, interface, signal range and approved configuration. -
Which diagnostics should be reviewed after installing 1SAY130110R0100 07SS91C2?
Review power, communication and module status indications for 1SAY130110R0100 07SS91C2, then clear only faults resolved by the completed work. -
Which article-code details should engineering verify for 1SAY130110R0100 07SS91C2?
For 1SAY130110R0100 07SS91C2, match the complete ABB article code, ABB Advant AC500, component type and installed position. -
Which connection records should be captured before removing 1SAY130110R0100 07SS91C2?
Photograph the AC500 backplane bus, terminal numbers, cable destinations, shields, earth points and neighboring modules used by 1SAY130110R0100 07SS91C2. -
How should configuration data be protected before a 1SAY130110R0100 07SS91C2 exchange?
Save the approved ABB project, program, parameter set or rack configuration that identifies 1SAY130110R0100 07SS91C2 before exchange. -
What maintenance evidence should remain with 1SAY130110R0100 07SS91C2?
Keep receiving inspection, connection records, configuration backup, measured values, diagnostic results and final acceptance for 1SAY130110R0100 07SS91C2.
READY TO VERIFY YOUR PART?
Get a 1SAY130110R0100 07SS91C2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
