PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
200C-IE4xOE2 industrial I/O module
ABB 200C-IE4xOE2 is a industrial I/O module for the ABB Advant Controller 250. It is used to abb Advant Controller 250. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete industrial I/O module
ACTUAL APPLICATIONS
Application context for 200C-IE4xOE2
Manufacturer documentation places the Industrial I/O Module in practical process applications. The three cases below describe different operating tasks in which 200C-IE4xOE2 performs its documented product-family role with the configured companion equipment.
- 01 · FOOD & BEVERAGE
Regulate clean-in-place transfer during sanitation transition
Within the CIP supply and return headers, 200C-IE4xOE2 operates in its approved product-family role as a Industrial I/O Module. During sanitation transition, the system uses this function to coordinate valve paths and pump availability, helping it complete sanitation without cross-routing product. - 02 · PULP & PAPER
Stabilize stock preparation with Industrial I
At the control layer of the pulp chests and refiners, 200C-IE4xOE2 performs its assigned control role as a Industrial I/O Module. During grade change, the system uses this function to coordinate flow, consistency and equipment permissives, helping it deliver stable stock to the machine. - 03 · CHEMICAL & PETROCHEMICAL
Route product blending with Industrial I process control
Across the component tanks and blend headers, 200C-IE4xOE2 operates in its approved product-family role as a Industrial I/O Module. During blend correction, the system uses this function to adjust component addition from quality feedback, helping it bring the blend toward its release target.
Technical specifications for 200C-IE4xOE2
-
Product Model200C-IE4xOE2
-
Product Parametersindustrial I/O module
-
In stock1 unit
-
ManufacturerABB
-
Exact Article Code200C-IE4xOE2
-
Product FamilyABB Advant Controller 250
-
Component TypeIndustrial I/O Module
-
System ClassDCS System
-
Mounting FormatPlug-in control rack
-
System InterfaceSeries 200 I/O bus
-
Control Supply24 V DC I/O supply
-
Channel CapacityModel-defined channel set
-
Signal StandardSystem-specific I/O levels
-
Electrical IsolationIsolated field circuits
-
Operating Temperature0 to +55 °C cabinet range
-
Protection LevelIP20 control cabinet
-
Configuration ToolAdvant engineering tools
-
Commissioning TestI/O and diagnostic functional test
View all additional
Alternative Names
200C IE4xOE2
ABB Advant Controller 250 industrial I/O module
ABB industrial I/O module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 200C-IE4xOE2 to the installed ABB Advant Controller 250
ABB 200C-IE4xOE2 is a industrial I/O module used in the ABB Advant Controller 250. Use 200C-IE4xOE2 in the specified ABB Advant Controller 250 position with the documented supply, signal range and system interface. Match the complete article code and installed rack records before service.
Record terminal numbers, connector keying, rack position, shields and protective earth for 200C-IE4xOE2. Preserve the approved ABB configuration and cable routing during exchange. Confirm dcs system, plug-in control rack, the exact mechanical position and the approved system configuration before connection.
After fitting 200C-IE4xOE2, check power and module diagnostics, then test the affected I/O, communication, controller or measurement function at a safe operating point and record acceptance. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 200C-IE4xOE2
- Product class: industrial I/O module
- Family: ABB Advant Controller 250
The ABB 200C-IE4xOE2 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 200C-IE4xOE2 identity before exchange
Replace 200C-IE4xOE2 only after matching the full article identity, industrial I/O module, installed 24 v dc i/o supply and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, system-specific i/o levels, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete i/o and diagnostic functional test. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 200C-IE4xOE2
- Connection: System-specific I/O levels
- Test: I/O and diagnostic functional test
The ABB 200C-IE4xOE2 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 200C-IE4xOE2
- Installation checks matched to ABB Advant Controller 250
- Exact ABB identity required before service
Documentation for ABB 200C-IE4xOE2 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 30 × 6.3 cm
-
Shipping weight0.4 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 200C-IE4xOE2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which ABB family documentation applies to 200C-IE4xOE2?
Use the ABB documentation for ABB Advant Controller 250 and confirm that the exact 200C-IE4xOE2 code appears in the applicable hardware scope. -
How should technicians confirm the signal range for 200C-IE4xOE2?
Compare the connected field circuit with System-specific I/O levels and use calibrated test equipment before applying signals to 200C-IE4xOE2. -
Which electrical values must maintenance check on 200C-IE4xOE2?
Confirm 24 V DC I/O supply, System-specific I/O levels, Isolated field circuits and protective earth before connecting 200C-IE4xOE2. -
What commissioning result releases 200C-IE4xOE2 for service?
For 200C-IE4xOE2, complete the I/O and diagnostic functional test, confirm normal diagnostics and record the affected equipment response. -
What companion hardware must match 200C-IE4xOE2?
Verify the rack, controller, power supply, bus coupler, terminal assembly and adjacent modules documented for 200C-IE4xOE2. -
What installed-system evidence is needed before replacing 200C-IE4xOE2?
Archive the rack drawing, connection photographs, project or configuration backup and current diagnostics before removing 200C-IE4xOE2. -
Can a visually similar module directly replace 200C-IE4xOE2?
Physical similarity is insufficient; a replacement for 200C-IE4xOE2 must match the full code, family, interface, signal range and approved configuration. -
Which diagnostics should be reviewed after installing 200C-IE4xOE2?
Review power, communication and module status indications for 200C-IE4xOE2, then clear only faults resolved by the completed work.
READY TO VERIFY YOUR PART?
Get a 200C-IE4xOE2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
