PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Advant OCS and Advant-800xA
- ABB Advant S800 I/O
- 3AXD50000042865 BDPS-11C
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3AXD50000042865 BDPS-11C power supply board
ABB 3AXD50000042865 BDPS-11C is a power supply board for the ABB Advant S800 I/O. It is used to dnv/gl, ABS, LR, BV (optional). Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete power supply board
ACTUAL APPLICATIONS
Application context for 3AXD50000042865 BDPS-11C
Manufacturer documentation places the Power Supply Board in practical power applications. The three cases below describe different operating tasks in which 3AXD50000042865 BDPS-11C performs its documented product-family role with the configured companion equipment.
- 01 · MACHINERY MANUFACTURING
Observe machine-tool automation with Power Supply
At the control layer of the spindles, axes and tool changers, 3AXD50000042865 BDPS-11C operates in its approved product-family role as a Power Supply Board. During cycle start, the system uses this function to coordinate the equipment states required by the active cycle, helping it complete the machining step with traceable status. - 02 · WATER & WASTEWATER
Coordinate raw-water pumping with Power Supply
As part of the intake pumps and wet wells, 3AXD50000042865 BDPS-11C provides its specified system function as a Power Supply Board. During peak-flow demand, the system uses this function to coordinate pump duty and level response, helping it maintain hydraulic continuity. - 03 · POWER GENERATION
Sequence boiler feedwater with Power Supply process control
At the control layer of the feed pumps and drum-level loops, 3AXD50000042865 BDPS-11C provides its specified system function as a Power Supply Board. During protective transfer, the system uses this function to balance flow demand with process inventory, helping it preserve the steam-water balance.
Technical specifications for 3AXD50000042865 BDPS-11C
-
Product Model3AXD50000042865 BDPS-11C
-
Product Parameterspower supply board
-
In stock1 unit
-
ManufacturerABB
-
Operating Temperature-40°C to +70°C (-40°F to +158°F)
-
Humidity5–95% RH (non-condensing)
-
MarineDNV/GL, ABS, LR, BV (optional)
-
Primary Input18–32 V DC
-
Backup Input24 V DC
-
Output Current6 A
-
Holdup Time≥48 hours
-
Efficiency>85% (typical).
-
Ripple & Noise<100 mV peak-to-peak
-
Exact Article Code3AXD50000042865 BDPS-11C
-
Board DesignationBDPS-11C
-
Product FamilyABB Advant S800 I/O
-
Component TypePower Supply Board
-
Assembly ClassABB PCB assembly
-
System InterfaceABB Advant S800 I/O control interface
View all additional
Alternative Names
3AXD50000042865 BDPS 11C
ABB Advant S800 I/O power supply board
ABB power supply board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3AXD50000042865 BDPS-11C to the installed ABB Advant S800 I/O
ABB 3AXD50000042865 BDPS-11C is a power supply board used in the ABB Advant S800 I/O. Use 3AXD50000042865 BDPS-11C only in the ABB Advant S800 I/O equipment position identified by the installed hardware list. Match the complete ABB article code, board designation and electrical interface before work begins.
Photograph connector keying, terminal references, cable routing, protective earth and adjacent assemblies for 3AXD50000042865 BDPS-11C. Reconnect the documented interface without changing the approved cabinet arrangement. Confirm 24 v dc, 6 a, the exact mechanical position and the approved system configuration before connection.
After installing 3AXD50000042865 BDPS-11C, check power-up indications, controller or converter diagnostics and the affected control function. Record measured results and maintenance acceptance before returning the equipment to service. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 3AXD50000042865 BDPS-11C
- Product class: power supply board
- Family: ABB Advant S800 I/O
The ABB 3AXD50000042865 BDPS-11C requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3AXD50000042865 BDPS-11C identity before exchange
Replace 3AXD50000042865 BDPS-11C only after matching the full article identity, power supply board, installed >85% (typical). and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, 3axd50000042865 bdps-11c, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete abb advant s800 i/o control interface. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 3AXD50000042865 BDPS-11C
- Connection: 3AXD50000042865 BDPS-11C
- Test: ABB Advant S800 I/O control interface
The ABB 3AXD50000042865 BDPS-11C requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 3AXD50000042865 BDPS-11C
- Installation checks matched to ABB Advant S800 I/O
- Exact ABB identity required before service
Documentation for ABB 3AXD50000042865 BDPS-11C must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizeConfirm before dispatch
-
Shipping weight0.94 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3AXD50000042865 BDPS-11C
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which photographs help a distributor source 3AXD50000042865 BDPS-11C?
Provide clear photos of the complete 3AXD50000042865 BDPS-11C label, revision marks, connectors and installed equipment position. -
How should a distributor quote the exact 3AXD50000042865 BDPS-11C assembly?
Quote ABB 3AXD50000042865 BDPS-11C, quantity, product family, visible revision marks and the destination equipment in the request. -
Which ABB system documents apply to 3AXD50000042865 BDPS-11C?
Use ABB documentation for ABB Advant S800 I/O and confirm that the exact 3AXD50000042865 BDPS-11C assembly is covered by the hardware scope. -
How should the signal or power interface for 3AXD50000042865 BDPS-11C be verified?
Compare every connected circuit with the controlled drawing and verify the approved electrical class before connecting 3AXD50000042865 BDPS-11C. -
Which electrical checks apply before energising 3AXD50000042865 BDPS-11C?
Confirm the documented supply, interface, insulation condition and protective earth before energising 3AXD50000042865 BDPS-11C. -
What commissioning evidence is needed after fitting 3AXD50000042865 BDPS-11C?
Record power-up status, diagnostics, the affected function test and final maintenance approval for 3AXD50000042865 BDPS-11C. -
Which companion hardware must match 3AXD50000042865 BDPS-11C?
Verify the documented rack, control unit, power stage, connector assembly and adjacent hardware paired with 3AXD50000042865 BDPS-11C. -
What drawings should engineering review before installing 3AXD50000042865 BDPS-11C?
Review the installed hardware list, cabinet drawing, connection diagram and controlled ABB Advant S800 I/O service documentation for 3AXD50000042865 BDPS-11C.
READY TO VERIFY YOUR PART?
Get a 3AXD50000042865 BDPS-11C quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
-
3BHE044249R0003 GDC806 C0003/3BHE041294R0103 GDC806 C103industrial control circuit boardManufacturer: ABBView Details -
-
-
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
