PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Advant OCS and Advant-800xA
- V18345-1010261001
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
V18345-1010261001 TZIDC electro pneumatic positioner
The ABB V18345-1010261001 is a configured TZIDC electro pneumatic positioner for controlling pneumatic linear or rotary valve actuators from a 4 to 20 mA two wire command. It compares the requested valve position with mechanical feedback from the actuator and continuously adjusts the pneumatic output until the final control element reaches the required travel. Automatic determination of the control parameters reduces commissioning effort and adapts the response to the installed valve and actuator assembly.
A microprocessor, current to pressure conversion stage and pneumatic amplifier are combined in a compact weather resistant housing. The modular TZIDC platform supports local operating functions, position indication and application specific feedback or safety options according to the complete catalog number. Its robust environmental range and standardized mounting arrangements make it suitable for modulating process valves in chemical, power, water, oil and general manufacturing plants.
A microprocessor, current to pressure conversion stage and pneumatic amplifier are combined in a compact weather resistant housing. The modular TZIDC platform supports local operating functions, position indication and application specific feedback or safety options according to the complete catalog number. Its robust environmental range and standardized mounting arrangements make it suitable for modulating process valves in chemical, power, water, oil and general manufacturing plants.
BEFORE YOU BUY
Confirm the complete TZIDC electro pneumatic positioner
ACTUAL APPLICATIONS
Application fields for V18345-1010261001
V18345-1010261001 is used across compatible installations in the following broad industrial application fields, subject to verified system design and operating requirements.
-
01 · POWER GENERATION
Thermal, Hydroelectric and Renewable Power Generation
Thermal and hydroelectric power productionRenewable generation and energy integration -
02 · INDUSTRIAL MANUFACTURING
Industrial Manufacturing and Continuous Production
Discrete manufacturing and assembly productionContinuous industrial production operations -
03 · WATER & WASTEWATER
Municipal Water and Industrial Wastewater Services
Municipal water treatment servicesIndustrial wastewater treatment operations
Technical specifications for V18345-1010261001
-
Product ModelV18345-1010261001
-
Product ParametersTZIDC electro pneumatic positioner
-
In stock1 unit
-
ManufacturerABB
-
Compressed air output0 to 6 bar
-
Supply pressure1.4 to 6 bar
-
Catalog numberV18345-1010261001
-
Product typeElectro pneumatic positioner
-
Input signal4 to 20 mA two wire
-
Actuator compatibilityLinear or rotary pneumatic actuators
-
Control methodElectronic configurable positioning
-
Pneumatic stageI P module with pneumatic amplifier
-
CommissioningAutomatic parameter determination
-
Communication optionLKS service interface
-
Operating temperatureMinus 40 to 85 °C
-
Enclosure protectionIP65 and NEMA 4X
-
Mechanical indicationIntegrated position indicator configuration
-
Safety applicationSuitable for SIL2 loops
-
Mounting standardsDIN IEC 534 NAMUR or VDI VDE 3845
View all additional
Alternative Names
ABB TZIDC electro pneumatic positioner
ABB TZIDC
TZIDC electro pneumatic positioner for ABB TZIDC
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate V18345-1010261001 TZIDC electro pneumatic positioner
Integrate V18345-1010261001 as the documented TZIDC electro pneumatic positioner within the ABB TZIDC architecture. The manufacturer data defines its functional role and compatible hardware, so the carrier, power arrangement, network or signal interface must follow the approved configuration for this exact article.
Plan the installation around I P module with pneumatic amplifier, Automatic parameter determination and LKS service interface. Apply the cable routing, terminal assignment, shielding, grounding and supply practices stated for the product family, and place the component in the correct station, drive, instrument or network position before configuration is loaded.
Commission the complete assembly in a controlled operating state. Establish the required supply and communication conditions first, review device diagnostics, and then exercise the connected signals or functions across their intended range. Store the final hardware configuration, wiring record and functional results with the plant documentation.
Features:
- Exact identity: V18345-1010261001
- Documented ABB TZIDC architecture
- Controlled commissioning with recorded results
V18345-1010261001 requires documented system integration before energising the installation.
INTERCHANGEABILITY
Verify V18345-1010261001 before replacement
Use V18345-1010261001 as the exact replacement identity for this ABB TZIDC function. Related family codes can differ in interface behavior, signal allocation, firmware, memory, licensing or mechanical keying, so the full article number and product role must correspond to the installed equipment.
Record the installation before removal, including Automatic parameter determination, LKS service interface and Minus 40 to 85 °C. Capture the physical position, connector orientation, conductor labels, network settings, parameter file, operating status and any accessory or carrier that determines compatibility with the surrounding system.
After installation, restore only the approved configuration and compare device status with the saved baseline. Check each affected signal path, communication link, power circuit or control function through normal diagnostics, and complete the manufacturer required commissioning tests before the equipment returns to service.
Features:
- Match V18345-1010261001 exactly
- Preserve installation and configuration records
- Validate every affected function after fitting
V18345-1010261001 requires replacement verification against the installed hardware and configuration.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Match documents to the complete product identity
- Use the applicable manufacturer family instructions
- Additional documents are supplied only when quoted
Documentation for V18345-1010261001 must be checked against the installed configuration before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size11.4 × 8.6 × 10.4 cm
-
Net weight1.70 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9032810000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about V18345-1010261001
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is V18345-1010261001?
V18345-1010261001 is a TZIDC electro pneumatic positioner for the ABB TZIDC. -
Which identity must be used when ordering V18345-1010261001?
Use the complete V18345-1010261001 marking and compare it with the installed label and project records. -
Can a similar family item replace V18345-1010261001?
Do not confirm substitution from a family name or similar appearance. Verify the complete code, interfaces, revision and approved configuration. -
What should be recorded before removing V18345-1010261001?
Record the installed position, connections, cable labels, settings and diagnostic state. -
What should be inspected when V18345-1010261001 arrives?
Inspect the label, housing, connectors, terminals and packaging for correct identity and condition. -
Which checks follow installation?
Restore the approved configuration and complete controlled power-up, diagnostic and functional tests. -
What information should accompany a quotation?
Provide the complete model, quantity, clear label photographs, destination and required delivery date. -
Which documentation applies?
Use the manufacturer documentation for ABB TZIDC and confirm that its scope covers the installed configuration.
READY TO VERIFY YOUR PART?
Get a V18345-1010261001 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
V18345-1010261001TZIDC electro pneumatic positionerManufacturer: ABBView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
