PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
NIMP01 Multifunction Processor Termination Module
ABB Bailey NIMP01 is an INFI 90 multifunction-processor termination module that brings the processor serial interfaces to the field connection arrangement. It provides two isolated RS-232-C ports; one port can instead be configured as a non-isolated RS-485 interface. The board occupies one slot in an NTMU01 or NTMU02 termination mounting unit.
The manufacturer instruction specifies 24 V DC supply and 210 mA maximum current consumption. Eighteen configurable jumpers establish the serial-port and related connection arrangements, including J18 selection for the RS-485 port. Operation is specified from 0 to 70 C, and the module includes a 1.0 A, 250 V DC fuse identified in the replacement instructions.
The manufacturer instruction specifies 24 V DC supply and 210 mA maximum current consumption. Eighteen configurable jumpers establish the serial-port and related connection arrangements, including J18 selection for the RS-485 port. Operation is specified from 0 to 70 C, and the module includes a 1.0 A, 250 V DC fuse identified in the replacement instructions.
BEFORE YOU BUY
Confirm the complete NIMP01 identity
ACTUAL APPLICATIONS
Application fields for NIMP01
These broad application fields reflect the documented function and technical characteristics of NIMP01.
-
01 · CHEMICALS
Inorganic Resources and Petrochemical Fields
Inorganic chemical resources and petrochemical fieldsOrganic chemical fields and specialty chemistry -
02 · OIL & GAS
Onshore Gas and Petroleum Refining
Onshore natural gas and petroleum refiningOffshore petroleum and associated condensate fields -
03 · POWER GENERATION
Conventional Electricity and Hydroelectric Power
Conventional electricity resources and hydroelectric powerRenewable electricity fields and thermal energy
Technical specifications for NIMP01
-
Product ModelNIMP01
-
Product ParametersMultifunction Processor Termination Module
-
In stock1 unit
-
ManufacturerABB
-
Supply voltage24 V DC
-
Maximum current consumption210 mA
-
RS-232-C interfaces2 isolated serial ports
-
Alternative port arrangement1 RS-232-C plus 1 non-isolated RS-485
-
Control-station serial links1
-
Configurable jumpers18
-
Operating temperature0 to 70 C
-
Relative humidity5 to 90% +/-5%, noncondensing
-
Maximum altitude3 km
-
Field-supply fuse1.0 A / 250 V DC
-
TMU slot requirement1
-
RS-485 selection jumperJ18 pins 1-2; use P7
-
RS-232 mode terminal connectorP5
-
Serial device cable limit15 m for listed HCBL01 cable
-
Termination-module cable limit30 m for listed NKTM01 cable
View all additional
Alternative Names
NIMP01
Bailey INFI 90
Multifunction Processor Termination Module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate NIMP01 within Bailey INFI 90
Select the serial mode and handshake arrangement from the NIMP01 jumper tables. The two RS-232-C ports are isolated, but the alternate RS-485 port is not; this distinction must be retained when planning the connected equipment and signal reference.
Use the applicable NKTM01, NKTU02 or NKTU12 connection arrangement for the installed processor and termination configuration. For RS-485 selection, J18 pins 1 and 2 are linked and P7 is used in place of P5; the P5 terminal serial port is inactive in that mode.
Mount the board in its assigned termination-unit position, connect 24 V DC, common and chassis ground as shown, and observe the environment limits. Follow the documented cable limits for the selected cable and connected device, rather than applying one distance to all serial paths.
Features:
- Supply voltage: 24 V DC
- Maximum current consumption: 210 mA
- Bailey INFI 90
Use NIMP01 only within the documented Bailey INFI 90 arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace NIMP01 within Bailey INFI 90
Record all eighteen jumper positions and identify the processor, serial mode and connected cables before removing NIMP01. The auxiliary NIMP02 needs NIMP01 to operate and is not a standalone substitute for the main termination module.
Turn off cabinet and field-device power as required by the manufacturer before rewiring. Preserve supply, common, chassis ground and each serial connection, and verify that the replacement fuse and jumper arrangement match the installation.
After installing the spare, verify the selected RS-232-C or RS-485 mode, handshake behavior and communication with each intended device. Do not use a generic processor-board configuration to overwrite the termination-module settings.
Features:
- NIMP01 complete suffix
- Termination-module cable limit: 30 m for listed NKTM01 cable
- Serial-port jumpers and cable assignments retained
Use NIMP01 only within the documented Bailey INFI 90 arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Exact-model technical data for NIMP01
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for NIMP01 must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size3.50 x 17.20 x 17.70 cm
-
Net weight0.28 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about NIMP01
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Are both serial ports of NIMP01 isolated?
NIMP01 provides two isolated RS-232-C ports. When one port is configured as RS-485, that alternate RS-485 interface is non-isolated. -
What changes when J18 selects RS-485 on NIMP01?
For NIMP01, jumper J18 pins 1-2 and use connector P7; the terminal serial port P5 becomes inactive in that mode. -
How much 24 V current is required by NIMP01?
The Bailey instruction specifies a maximum of 210 mA at +24 V DC for NIMP01. -
Can NIMP02 operate without NIMP01?
No. The manufacturer states that NIMP02 requires NIMP01; it is an auxiliary termination module rather than a substitute for the primary unit. -
Which fuse rating is listed for NIMP01?
The replacement procedure for NIMP01 calls for a 1.0 A, 250 V DC fuse, with cabinet power off during the replacement. -
Must jumper positions be copied when replacing NIMP01?
Yes. Record and reproduce the application-specific settings of the eighteen configurable jumpers on NIMP01, including serial mode and handshake selections. -
Which cable details help a distributor source NIMP01?
Identify NIMP01, the connected processor, serial-mode requirement and installed cable designations. Quote any NKTM01 or NKTU cable separately when required. -
What should an incoming NIMP01 spare be compared against?
Compare the NIMP01 label, fuse, connector condition and required supplied scope with the purchase order; configure its jumpers for the installation before applying power.
READY TO VERIFY YOUR PART?
Get a NIMP01 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
NIMP01Multifunction Processor Termination ModuleManufacturer: ABBView Details
-
NTCF01Termination Unit - Optic to OpticManufacturer: ABBView Details -
IPFLD24FIELD POWER MODULEManufacturer: ABBView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
