PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
NTAI05 INFI 90 analog input termination unit
Bailey Controls NTAI05 is a INFI 90 analog input termination unit in the INFI 90 range. The applicable OEM guide documents analog input termination unit and input capacity of 15 or 16, depending on slave module.
Its installation and service settings are detailed in Bailey Controls NTAI05 Analog Input Termination Unit, I-E96-416B. Mounting panel is NFTP01 Field Termination Panel; slave connection is P1 cable connector. Match the installed assembly and wiring before replacement.
Its installation and service settings are detailed in Bailey Controls NTAI05 Analog Input Termination Unit, I-E96-416B. Mounting panel is NFTP01 Field Termination Panel; slave connection is P1 cable connector. Match the installed assembly and wiring before replacement.
BEFORE YOU BUY
Confirm the complete infi 90 analog input termination unit
ACTUAL APPLICATIONS
Application context for NTAI05
NTAI05 serves the documented ABB Bailey Infi 90 role in the industry areas below. The manufacturer's guide describes device role as Analog input termination unit and input capacity as 15 or 16, depending on slave module. Verify the installed configuration for the particular application.
-
01 · CHEMICALS
Chemical Conversion and Blending
Chemical ManufacturingSpecialty Chemical Industries -
02 · DISTRICT ENERGY
District Energy and Steam Utilities
District Heating and CoolingCommunity Energy Services -
03 · PULP & PAPER
Pulp Processing and Paper Mills
Pulp and Paper ManufacturingForest Products Industries
Technical specifications for NTAI05
-
Product ModelNTAI05
-
Product ParametersINFI 90 analog input termination unit
-
In stock1 unit
-
ManufacturerABB
-
Device roleAnalog input termination unit
-
Input capacity15 or 16, depending on slave module
-
Mounting panelNFTP01 Field Termination Panel
-
Slave connectionP1 cable connector
-
Field connectionOn-board terminal blocks
-
Input selectionDipshunt configuration
-
Supported slave modulesIMASI02, IMFBS01 and IMASM01
-
Current input4–20 mA DC
-
Voltage input range−10 to +10 V DC
-
Other voltage ranges0–10 V, 1–5 V and 0–5 V DC
-
Supply requirement24 V DC
-
Input current provision20 mA per input
-
Ambient temperature0–70 °C
-
Relative humidity0–95% noncondensing to 55 °C
-
AltitudeSea level to 3 km
View all additional
Alternative Names
NTAI05
ABB Bailey Infi 90 INFI 90 analog input termination unit
NTAI05 INFI 90 analog input termination unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate NTAI05 infi 90 analog input termination unit
The Bailey Controls guide identifies NTAI05 as INFI 90 analog input termination unit. It documents input capacity as 15 or 16, depending on slave module. Confirm the console or termination assembly and controller interface before connection.
Use the documented interface and connection arrangement. Input capacity is 15 or 16, depending on slave module; mounting panel is NFTP01 Field Termination Panel. Check all field conductors, configuration and external supply against the installed project.
At startup, review power and status indications, test every affected channel, port or function in sequence, then record the verified settings and exact installed revision for future maintenance.
Features:
- 15 or 16 analog input paths
- Dipshunt-selectable input type
- NFTP01 termination mounting
The NTAI05 infi 90 analog input termination unit requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify NTAI05 infi 90 analog input termination unit
Verify the full NTAI05 marking, including its suffix, before removing the installed unit. A base manual for NTAI05 must be read with any applicable revision information and the current hardware configuration.
Preserve the project and photograph wiring, connector assignments, slot position and indicators. Compare the replacement's device role (Analog input termination unit) and input capacity (15 or 16, depending on slave module) with the service record.
After the change, restore the approved setup, confirm controller recognition and test affected signals or communications. Record the final nameplate and validation results.
Features:
- 4–20 mA and voltage signal routing
- 15 or 16 analog input paths
- NFTP01 termination mounting
The NTAI05 infi 90 analog input termination unit requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the NTAI05 infi 90 analog input termination unit must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size18 × 17.6 × 2 cm
-
Shipping weight0.40 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about NTAI05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should NTAI05 be checked before ordering?
Compare the full catalog and suffix with the installed label, ABB Bailey Infi 90 assembly and manufacturer document. -
Can another revision of NTAI05 replace NTAI05?
Do not infer interchangeability from the shared base number. Check applicable release notes, firmware and project compatibility. -
What should engineers record before exchanging NTAI05?
Save the approved project and record the slot, full nameplate, connector or terminal assignments, supply and current diagnostics. -
How should NTAI05 be tested after installation?
Confirm controller recognition and status, exercise each affected function with a known condition, and archive the measured outcome. -
Which manual covers NTAI05?
The linked manufacturer document covers base article NTAI05. Verify the particular NTAI05 suffix against the delivered module. -
What does a distributor need to quote NTAI05?
Send the complete order code, quantity, condition, delivery country and a legible label photo if revision matching is critical. -
How should incoming NTAI05 be inspected?
Compare the full label and condition against the quotation; inspect contacts, housing and included accessories before installation. -
What should be checked if NTAI05 is not recognized?
Confirm the correct slot or network position, supply, bus or firmware compatibility and project configuration before replacing other hardware.
READY TO VERIFY YOUR PART?
Get a NTAI05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
NTAI05INFI 90 analog input termination unitManufacturer: ABBView Details
-
CM30/3S0S0E0/STDUNIVERSAL PROCESS CONTROLLERManufacturer: ABBView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
