PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Drives
- 086363-002
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
086363-002 OSPS2 optical-sensor power board
ABB 086363-002 is an OSPS2 optical-sensor power printed wiring assembly in the ACCURAY quality-control equipment family. It is a replacement electronic assembly for supplying the optical-sensor section of compatible paper-quality measurement equipment.
The assembly carries the sensor-power circuitry on a printed circuit board and connects within the host scanner electronics. Its assigned function is optical-sensor power support; measurement processing and scanner operation belong to the complete quality-control equipment. Compatibility depends on the scanner generation, board revision and mating connections.
The assembly carries the sensor-power circuitry on a printed circuit board and connects within the host scanner electronics. Its assigned function is optical-sensor power support; measurement processing and scanner operation belong to the complete quality-control equipment. Compatibility depends on the scanner generation, board revision and mating connections.
BEFORE YOU BUY
Confirm the complete OSPS2 optical-sensor power board
ACTUAL APPLICATIONS
Where 086363-002 Fits Across Major Industry Sectors
Uses span energy, food and gas, subject to verified compatibility, operating conditions and project requirements.
-
01 · RENEWABLE ENERGY
Solar Energy Production and Wind Power Generation
Solar energy generation for renewable electricity and thermal production.Wind energy generation supporting renewable electricity supply and distribution. -
02 · FOOD & BEVERAGE
Commercial Dairy Processing and Consumer Beverage Production
Dairy processing and milk product manufacturing for consumer markets.Beverage brewing and bottling for retail and wholesale distribution. -
03 · OIL & GAS
Natural Gas Production and Petroleum Refining Operations
Natural gas production and processing for industrial fuel supply.Petroleum refining and fuel production for commercial energy markets.
Technical specifications for 086363-002
-
Product Model086363-002
-
Product ParametersIndustrial control board
-
In stock1 unit
-
ManufacturerABB
-
Mounting FormatPlug-in control rack
-
Backplane InterfaceABB control backplane
-
Control Supply24 V DC
-
Electrical IsolationIsolated field circuits
-
Operating Temperature0 to +55 °C
-
Degree of ProtectionIP20
View all additional
Alternative Names
086363 002
ABB industrial control systems industrial control board
ABB industrial control board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 086363-002 to the installed ABB industrial control systems
ABB 086363-002 is a industrial control board for the ABB industrial control systems. Its complete article identity determines the documented interface, operating role and approved host equipment.
Engineering should compare mounting format (Plug-in control rack), system interface (Manufacturer backplane bus), control supply (24 V DC control class) with the installed equipment. Confirm connectors, wiring, addressing and configuration support before connection.
Use the applicable manufacturer documentation for the complete wiring and configuration sequence. Validate communication or signal response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact product identity: 086363-002
- Product class: Industrial control board
- Model-specific configuration verified
The 151X1202YE03SA04 IS200STAIH2ADC analog I/O terminal board requires appropriate configuration before system integration and commissioning.
REPLACEMENT CONTROL
Verify the complete 086363-002 identity before exchange
Replace 086363-002 only after matching the complete article code, industrial control board role, installed ABB industrial control systems equipment and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive, network or instrument configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Match the complete 086363-002 identity
- Compare revision, interfaces and mating hardware
- Test diagnostics and field operation before service
The 151X1202YE03SA04 IS200STAIH2ADC analog I/O terminal board requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 151X1202YE03SA04 IS200STAIH2ADC analog I/O terminal board must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 30 × 6.3 cm
-
Shipping weight0.45 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 086363-002
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What maintenance evidence should remain with 086363-002?
Keep receiving inspection, connection records, configuration backup, measured values, diagnostic results and final acceptance for 086363-002. -
What receiving inspection applies to 086363-002?
Inspect the exact 086363-002 label, housing, terminals, connectors and packaging; reject damage, contamination or unreadable markings. -
What cabinet conditions should be checked around 086363-002?
Check clearance, ventilation, mounting security, cabinet temperature and access around 086363-002 before energising. -
Which nameplate photographs help source 086363-002?
Provide clear photographs of the complete 086363-002 nameplate, revision markings, connectors and installed rack position. -
How should a distributor quote the complete 086363-002 identity?
Specify ABB 086363-002, quantity, ABB industrial control systems, destination and required PDF scope in the quotation request. -
Which ABB family documentation applies to 086363-002?
Use the ABB documentation for ABB industrial control systems and confirm that the exact 086363-002 code appears in the applicable hardware scope. -
How should technicians confirm the signal range for 086363-002?
Compare the connected field circuit with System-specific I/O levels and use calibrated test equipment before applying signals to 086363-002. -
Which electrical values must maintenance check on 086363-002?
Confirm 24 V DC control class, System-specific I/O levels, Isolated field circuits and protective earth before connecting 086363-002.
READY TO VERIFY YOUR PART?
Get a 086363-002 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
