PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Drives
- ACS 550
- 3BHE021951R0124 KVC758 A124
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3BHE021951R0124 KVC758 A124 industrial power supply
ABB 3BHE021951R0124 KVC758 A124 is an industrial power supply in the ACS 550. It is used to supply the specified operating power to the connected automation hardware.
Its documented configuration includes processor of 32-bit, memory of 512 kB FRAM, input voltage of DC 9–36V, and operating voltage of 220 V nominal. During operation, the industrial power supply converts and distributes the specified supply voltage to the connected hardware.
Its documented configuration includes processor of 32-bit, memory of 512 kB FRAM, input voltage of DC 9–36V, and operating voltage of 220 V nominal. During operation, the industrial power supply converts and distributes the specified supply voltage to the connected hardware.
BEFORE YOU BUY
Confirm the complete industrial power supply
ACTUAL APPLICATIONS
Where 3BHE021951R0124 KVC758 A124 Fits Across Major Industry Sectors
Uses span paper, metals and chemicals, subject to verified compatibility, operating conditions and project requirements.
-
01 · PULP & PAPER
Pulp Manufacturing and Commercial Paper Material Production
Pulp production and fiber processing for industrial paper manufacturing.Paper manufacturing and finishing for commercial printed material supply. -
02 · METALS & METALWORKING
Steel Production and Industrial Metal Material Processing
Steelmaking and primary metal production for industrial material supply.Steel rolling and finishing for commercial construction material production. -
03 · CHEMICAL PROCESSING
Specialty Chemical Manufacturing and Consumer Chemical Production
Specialty chemical manufacturing for industrial processing and material markets.Consumer chemical production and formulation for household product supply.
Technical specifications for 3BHE021951R0124 KVC758 A124
-
Product Model3BHE021951R0124 KVC758 A124
-
Product Parametersindustrial power supply
-
In stock1 unit
-
ManufacturerABB
-
Processor32-bit
-
Memory512 kB FRAM
-
Input VoltageDC 9–36V
-
Operating Voltage220 V nominal
-
Output Frequency30 kHz nominal
-
Isolation Voltage1500 V DC
-
Operating Temperature+5°C to +55°C
-
Storage Temperature–40°C to +70°C
-
Exact Article Code3BHE021951R0124 KVC758 A124
-
Board DesignationKVC758 A124
-
Product FamilyACS 550
-
Component TypeIndustrial Power Supply
-
Assembly ClassABB PCB assembly
-
System InterfaceACS 550 control interface
-
Control SupplyDocumented rack control supply
View all additional
Alternative Names
3BHE021951R0124 KVC758 A124
ABB industrial power supply
ACS 550 industrial power supply
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 3BHE021951R0124 KVC758 A124 to the installed ACS 550
ABB 3BHE021951R0124 KVC758 A124 is a industrial power supply for the ACS 550. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare operating voltage (220 V nominal), output frequency (30 kHz nominal) and isolation voltage (1500 V DC) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 3BHE021951R0124 KVC758 A124
- Product class: industrial power supply
- Family: ACS 550
The ABB 3BHE021951R0124 KVC758 A124 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 3BHE021951R0124 KVC758 A124 identity before exchange
Replace 3BHE021951R0124 KVC758 A124 only after matching the complete article code, industrial power supply, installed ACS 550 role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 3BHE021951R0124 KVC758 A124
- Product class: industrial power supply
- Family check: ACS 550
The ABB 3BHE021951R0124 KVC758 A124 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical data prepared for 3BHE021951R0124 KVC758 A124
- Product family: ACS 550
- Exact ABB identity required before service
Documentation for ABB 3BHE021951R0124 KVC758 A124 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size30 × 22 × 12 cm
-
Shipping weight0.20 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 3BHE021951R0124 KVC758 A124
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What cabinet conditions should be checked for 3BHE021951R0124 KVC758 A124?
Check secure mounting, ventilation, contamination, clearance and access around 3BHE021951R0124 KVC758 A124 before service. -
Which photographs help a distributor source 3BHE021951R0124 KVC758 A124?
Provide clear photos of the complete 3BHE021951R0124 KVC758 A124 label, revision marks, connectors and installed equipment position. -
How should a distributor quote the exact 3BHE021951R0124 KVC758 A124 assembly?
Quote ABB 3BHE021951R0124 KVC758 A124, quantity, product family, visible revision marks and the destination equipment in the request. -
Which ABB system documents apply to 3BHE021951R0124 KVC758 A124?
Use ABB documentation for ACS 550 and confirm that the exact 3BHE021951R0124 KVC758 A124 assembly is covered by the hardware scope. -
How should the signal or power interface for 3BHE021951R0124 KVC758 A124 be verified?
Compare every connected circuit with the controlled drawing and verify the approved electrical class before connecting 3BHE021951R0124 KVC758 A124. -
Which electrical checks apply before energising 3BHE021951R0124 KVC758 A124?
Confirm the documented supply, interface, insulation condition and protective earth before energising 3BHE021951R0124 KVC758 A124. -
What commissioning evidence is needed after fitting 3BHE021951R0124 KVC758 A124?
Record power-up status, diagnostics, the affected function test and final maintenance approval for 3BHE021951R0124 KVC758 A124. -
Which companion hardware must match 3BHE021951R0124 KVC758 A124?
Verify the documented rack, control unit, power stage, connector assembly and adjacent hardware paired with 3BHE021951R0124 KVC758 A124.
READY TO VERIFY YOUR PART?
Get a 3BHE021951R0124 KVC758 A124 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
