PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
SMIO-01C Drive Control I/O Board
ABB SMIO-01C is a drive control I/O board with analog, digital, relay and serial connections grouped along its edges. The open printed-circuit assembly brings these control interfaces together, rather than performing the main-circuit switching function of a separate inverter power board.
Its labeled base interfaces comprise two analog inputs, two analog outputs, six digital inputs and three relay outputs. An RS485 connection has its own termination control, while analog input selection uses board-mounted switches; actual assignments depend on the configured host drive.
Its labeled base interfaces comprise two analog inputs, two analog outputs, six digital inputs and three relay outputs. An RS485 connection has its own termination control, while analog input selection uses board-mounted switches; actual assignments depend on the configured host drive.
BEFORE YOU BUY
Confirm the complete Drive Control I/O Board
ACTUAL APPLICATIONS
Relevant contexts for SMIO-01C
These broad field names describe ABB portfolio categories, not verified installation records for this individual SMIO-01C unit.
-
01 · POWER GENERATION
Conventional and Renewable Power Generation
Conventional Power Generation and Energy UtilitiesRenewable Power Generation and Public Utilities -
02 · PULP & PAPER
Paper and Pulp, Printing and Packaging
Pulp and Paper, Printing and PublishingPaper and Board, Packaging and Converting -
03 · OIL & GAS
Onshore and Offshore Oil and Natural Gas
Onshore Petroleum, Natural Gas and PetrochemicalsOffshore Oil, Natural Gas and Petrochemicals
Technical specifications for SMIO-01C
-
Product ModelSMIO-01C
-
Product ParametersDrive Control I/O Board
-
In stock10 units
-
ManufacturerABB
-
Base analog input channels2: AI1 and AI2
-
Base analog output channels2: AO1 and AO2
-
Base digital input channels6: DI1 to DI6
-
Base relay output channels3 changeover contact groups
-
Serial interface markingRS485
-
Field connection technologyScrew-clamp terminal blocks
-
Analog input selectionBoard-mounted AI1/AI2 selector switches
-
Bus termination controlBoard-mounted RS485 BUS TERMINATION switch
View all additional
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Identify the base control interfaces and host-drive setup
The SMIO-01C photographs show the base control-interface connections: two AI, two AO, six DI and three relay contact groups, with a separate RS485 connection. These observations establish the physical interface layout but do not establish a motor-power rating, a board supply tolerance or an independently verified operating-temperature range.
The analog selectors and RS485 termination control must be matched to the configured host drive and actual field connections. The ACS550 family manual provides common control-terminal guidance, including the distinction between auxiliary outputs and external connections; it is not treated here as a standalone service manual for every SMIO revision.
Integration also requires the complete host-drive identification, approved configuration and applicable firmware. Protocol support is not inferred from the RS485 label, and a generic connector shape is not a pinout. Use the exact service and connection instructions rather than transferring settings from an unrelated drive or board.
Features:
- Two AI, two AO, six DI and three relay groups
- Separate analog-selection and RS485 controls
- Host-dependent firmware and I/O assignments
Control and relay connections can carry externally supplied voltage. Qualified personnel must isolate every relevant circuit and use the actual host-drive service instructions.
INTERCHANGEABILITY
Verify SMIO-01C before replacement
Match the SMIO-01C marking, actual board revision and complete host-drive identification before selecting a spare. Do not substitute a main-circuit board or assume that another control board with similar terminal counts has the required hardware and firmware.
Record the analog selector positions, I/O allocation, RS485 connections and termination setting using the approved maintenance process. Distinguish the base board interfaces from optional expansion modules. Preserve the required configuration without treating a terminal voltage marking as a universal board-powering instruction.
After qualified replacement, verify the required host recognition, control signals and serial communication under the applicable acceptance procedure. A powered control panel alone does not establish correct I/O assignments, analog mode or bus termination. No unverified bare-board electrical rating is supplied here.
Features:
- Board revision and complete host-drive match
- Selector, I/O and bus-termination comparison
- Configured control and communications checks
Do not assume firmware or configuration compatibility from SMIO-01C alone. Verify the exact host-drive and service requirements before installation.
ABB SMIO-01C Drive Control I/O Board Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Features:
- Exact-model data for SMIO-01C
- Matching board-level manual not verified
- ACS 550 and ABB product directories
Documentation for SMIO-01C must match the complete installed product identity, the documented ACS550 Control Interface configuration and the supplied control I/O board before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Reference size23.2 × 10.1 × 2.8 cm
-
Reference weight0.16 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceConfirm with quotation
-
OriginSweden
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about SMIO-01C
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is SMIO-01C the inverter main power board?
The photographed SMIO board carries the labeled control I/O and RS485 connections. It is a control-interface board, not the separate main-circuit board. Do not transfer a drive power rating or a power-board description to this assembly. -
How many base I/O channels are visible on this board?
The terminal markings identify two analog inputs, two analog outputs, six digital inputs and three relay-output contact groups. These are the base board interfaces, not a count including optional expansion modules. -
Why must AI1 and AI2 selector positions be recorded?
The board has separate analog input selectors, and ACS550 family instructions distinguish current and voltage input setup. Record the actual positions and required signals under the approved drive procedure; do not assume the delivered board is already set for a particular signal. -
Does the RS485 terminal marking identify an Ethernet port?
No. The labeled serial connection is RS485. A firmware-specific protocol or compatibility with another communications network is not established solely by the physical interface marking. -
How should maintenance handle the bus-termination selector?
The board explicitly labels an RS485 BUS TERMINATION control. Its required setting depends on the actual bus position and the applicable host-drive connection instructions. Do not choose a setting from an unrelated board illustration or infer bus topology from a loose spare. -
Is the terminal marked +24 V a general board power-input instruction?
The ACS550 control-terminal table identifies its +24 V terminal as an auxiliary output. That family description must not be turned into permission to power an uninstalled spare through that terminal. Confirm the actual host and original service instructions before connection. -
Can any SMIO-01C be installed without checking the drive setup?
A common board marking alone does not establish the required host firmware, configuration or supplied revision. Match the complete drive and board identification, preserve the approved settings, and use the applicable manufacturer replacement procedure. -
Are relay terminals necessarily safe when the drive input is disconnected?
No. ACS550 family safety instructions warn that external sources may leave dangerous voltage at relay outputs even when input power is switched off. Qualified isolation must account for the actual external circuits; this is family safety guidance, not a claim about the condition of a loose board.
READY TO VERIFY YOUR PART?
Get a SMIO-01C quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
SMIO-01CDrive Control I/O BoardManufacturer: ABBView Details
-
HIEE400659R1 GD9993b-EPower BoardManufacturer: ABBView Details -
AFPS-61CPOWER SUPPLY BOARDManufacturer: ABBView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
