PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
NCAN-02C CANopen Fieldbus Adapter
ABB NCAN-02C is a CANopen fieldbus adapter documented for ABB drive installations, including the ACS800-67 wind turbine converter. It links the drive through optical transmit and receive ports and connects to the field network through screw terminals.
The adapter supports CANopen rates from 10 kbit/s to 1 Mbit/s and runs from a 24 V DC supply. The rail-mount enclosure is rated IP20, and the CANopen side uses a shielded twisted-pair multidrop bus.
The adapter supports CANopen rates from 10 kbit/s to 1 Mbit/s and runs from a 24 V DC supply. The rail-mount enclosure is rated IP20, and the CANopen side uses a shielded twisted-pair multidrop bus.
BEFORE YOU BUY
Confirm the complete NCAN-02C identity
ACTUAL APPLICATIONS
Application fields for NCAN-02C
These broad application fields reflect the documented function and technical characteristics of NCAN-02C.
-
01 · WIND ENERGY
Wind Generation and Renewable Energy
Wind generation and renewable energyWind power and electricity generation -
02 · INDUSTRIAL AUTOMATION
Industrial Drives and Automation
Industrial drive control and automationVariable speed and motion control -
03 · POWER CONVERSION
Electrical Power and Energy Conversion
Industrial power conversion and controlRenewable energy and power conversion
Technical specifications for NCAN-02C
-
Product ModelNCAN-02C
-
Product ParametersCANopen Fieldbus Adapter
-
In stock8 units
-
ManufacturerABB
-
Network protocolCANopen
-
Maximum network nodes128
-
Maximum bit rate1 Mbit/s
-
Minimum bit rate10 kbit/s
-
Bus termination120 Ω, 0.25 W metal film
-
Network topologyMultidrop
-
Network mediumShielded twisted pair
-
Communication modeAsynchronous half-duplex
-
Supply voltage24 V DC ±10%
-
Nominal current draw30 mA at 24 V DC
-
Enclosure protectionIP20
-
MountingStandard mounting rail
-
Drive interfaceFiber-optic transmitter and receiver
-
Terminal block pole count4 poles per block
-
Maximum terminal conductor cross-section2.5 mm²
View all additional
Alternative Names
NCAN-02C
ABB NCAN-02 CANopen option
ACS800-67 CANopen fieldbus adapter
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate NCAN-02C within ABB Drives CANopen
Match the installed drive option and optical interface to the ABB configuration documentation. Connect the adapter’s CANopen side using shielded twisted pair and verify the network’s termination points.
Set the node address and communication rate to match the drive project and the existing bus. Document the switch settings and the configured drive parameters before commissioning.
Verify 24 V DC supply polarity and check the installed X2 connector wiring. Confirm that the drive appears at the expected CANopen node address and that the required data exchanges correctly.
Features:
- Network protocol: CANopen
- Maximum network nodes: 128
- ABB Drives CANopen
Use NCAN-02C only within the documented ABB Drives CANopen arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace NCAN-02C within ABB Drives CANopen
Record the complete NCAN-02C marking, the drive type and the two optical leads before exchanging the unit. Note the adapter’s mounting and supply arrangement.
Copy the approved node address and rate settings from the installed configuration. Verify the X1 supply and X2 bus pin assignments before transferring either connector.
After replacement, check the adapter status indications and controller node diagnostics. Test the required CANopen data exchanges under the approved drive commissioning procedure.
Features:
- Network protocol: CANopen
- Maximum network nodes: 128
- ABB Drives CANopen
Use NCAN-02C only within the documented ABB Drives CANopen arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Exact-model technical data for NCAN-02C
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for NCAN-02C must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size2.10 x 11.40 x 9.80 cm
-
Net weight0.12 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8517623990
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about NCAN-02C
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How does NCAN-02C connect to the ABB drive?
The drive connection uses separate optical transmit and receive links. The field side connects to a CANopen bus. -
Which CANopen rates can NCAN-02C support?
The documented rates are 10, 20, 50, 100, 125, 250 and 500 kbit/s and 1 Mbit/s. Match the configured rate to the bus. -
What network termination should be checked for NCAN-02C?
Use 120 Ω termination at the ends of the multidrop bus. Verify the end-of-line location before adding a resistor. -
What supply should maintenance verify on NCAN-02C?
Check for 24 V DC ±10% at the module. The manual lists a typical consumption of 30 mA at 24 V DC. -
What ABB converter is documented with NCAN-02C?
ABB lists NCAN-02C as a CANopen option in the ACS800-67 wind turbine converter documentation. Confirm the actual drive configuration before use. -
Which conductors terminate on the network side of NCAN-02C?
Use the X2 diagram for the shield, CAN_L, CAN_H and bus supply assignments. Compare the existing terminal labels before reconnecting. -
What should the RFQ specify for NCAN-02C in a converter spare order?
List the complete NCAN-02C label and the ACS800-67 option configuration. Itemize the optical leads separately if required. -
What should receiving inspect on a replacement NCAN-02C?
Check the C suffix, the two removable screw terminal blocks and the optical transmit and receive ports before installation.
READY TO VERIFY YOUR PART?
Get a NCAN-02C quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
