PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
NXPP-03C Drive Distribution Circuit Board
ABB NXPP-03C is a circuit board in the control assembly of the documented R12i ACN/ACW644 drive module arrangement. NXPP-03C is identified in the +V991 phase-module repair instruction as the board used in the specified R12i U/W-phase conversion from the original NINT-73C assembly.
The R12i procedure identifies eight M4x8 base-plate fasteners and eight M4x20 spacers. The shield and insulating-spacer arrangement is part of the conversion, while the V-phase NINT current-setting jumpers S2 through S4 must match the power-plate rating. The R10i/R11i board combination is different and is not treated as interchangeable with the R12i pair.
The R12i procedure identifies eight M4x8 base-plate fasteners and eight M4x20 spacers. The shield and insulating-spacer arrangement is part of the conversion, while the V-phase NINT current-setting jumpers S2 through S4 must match the power-plate rating. The R10i/R11i board combination is different and is not treated as interchangeable with the R12i pair.
BEFORE YOU BUY
Confirm the complete NXPP-03C identity
ACTUAL APPLICATIONS
Application fields for NXPP-03C
These broad application fields reflect the documented function and technical characteristics of NXPP-03C.
-
01 · OIL & GAS
Petroleum Refining and Offshore Hydrocarbon Resources
Petroleum refining and offshore natural gas reservesConventional hydrocarbon reserves and onshore gas resources -
02 · POWER GENERATION
Hydroelectric Resources and Renewable Electricity
Hydroelectric resource areas and renewable electricity generationConventional electricity generation and alternative energy resources -
03 · CHEMICALS
Specialty Chemicals and Basic Petrochemical Resources
Specialty chemical resources and basic petrochemical fieldsIndustrial chemical fields and inorganic resource areas
Technical specifications for NXPP-03C
-
Product ModelNXPP-03C
-
Spare Model64008544C
-
Product ParametersDrive Distribution Circuit Board
-
In stock1 unit
-
ManufacturerABB
-
Documented module frameR12i
-
U/W assembly base fasteners8 x M4x8
-
U/W assembly spacers8 x M4x20
-
Insulating spacers at shield3 in documented R12i arrangement
-
Metal spacer conversionReplace 1 metal spacer with insulating spacer
-
V-phase current-setting jumpersS2 through S4; match power-plate rating
View all additional
Alternative Names
NXPP-03C
ACN/ACW644 +V991 R12i
Drive Distribution Circuit Board
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate NXPP-03C within ACN/ACW644 +V991 R12i
Use NXPP-03C only in the drive frame and assembly covered by the applicable ABB instructions. Figure 2 identifies the R12i NINT-73C/NXPP-03C combination separately from the R10i/R11i NINT-72C/NXPP-02C combination.
For the +V991 U/W-phase procedure, retain the R12i base plate, spacer locations and shield arrangement specified in the drawings. The conversion is a mechanical and control-assembly operation, not merely a plug-in substitution based on the printed board name.
Identify whether the V-phase is original or +V991 before planning the inter-phase reference connection. ABB provides different cabinet connection instructions for those cases and requires the applicable current-setting jumpers to be checked against the power-plate rating.
Features:
- Documented module frame: R12i
- U/W assembly base fasteners: 8 x M4x8
- ACN/ACW644 +V991 R12i
Use NXPP-03C only within the documented ACN/ACW644 +V991 R12i arrangement and applicable installation instructions.
INTERCHANGEABILITY
Replace NXPP-03C within ACN/ACW644 +V991 R12i
Photograph NXPP-03C, the frame identification, phase position and board connections before removal. Distinguish an original-board spare from a +V991 phase-module conversion so that the replacement scope is not silently changed.
Follow the ABB isolation and discharge procedure for the complete drive before handling the assembly. Retain the insulating spacers and shield details from the R12i drawings, and do not transfer the smaller-frame fastener arrangement to this frame.
After the documented conversion or repair, inspect the inter-phase reference connection and the V-phase current-setting jumpers under the applicable ABB configuration instruction. Complete the drive-specific return-to-service checks before energizing the repaired assembly.
Features:
- NXPP-03C complete suffix
- V-phase current-setting jumpers: S2 through S4; match power-plate rating
- R12i frame and U/W-phase conversion arrangement matched
Use NXPP-03C only within the documented ACN/ACW644 +V991 R12i arrangement and applicable installation instructions.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Exact-model technical data for NXPP-03C
- Document applicability checked against the complete identity
- Directory links by subcategory and brand
Documentation for NXPP-03C must match the installed product identity and supplied configuration.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Product size36.50 x 14.30 x 1.00 cm
-
Net weight0.20 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8504909000
-
OriginFinland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about NXPP-03C
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What original board does NXPP-03C replace in the R12i procedure?
ABB identifies NXPP-03C in the specified +V991 U/W-phase conversion from NINT-73C for frame R12i; this does not establish an unrestricted substitute in every drive. -
Does NXPP-03C belong to the R10i conversion?
The ABB instruction assigns NXPP-02C to the R10i/R11i combination. NXPP-03C is the separately illustrated R12i selection. -
What spacer change accompanies NXPP-03C in the official conversion?
The documented R12i procedure involving NXPP-03C replaces the indicated metal spacer with the supplied insulating spacer before reassembly. -
Which base hardware is shown with the NXPP-03C R12i arrangement?
The drawing for the R12i assembly containing NXPP-03C specifies eight M4x8 fasteners and eight M4x20 spacers. -
Does installing NXPP-03C remove the V-phase jumper check?
No. The repair instruction still requires the V-phase NINT S2-S4 current settings to match the power-plate rating after the assembly work involving NXPP-03C. -
Can NXPP-03C be fitted before drive isolation and discharge?
No. NXPP-03C is handled within the drive power-module assembly; follow the full ABB drive isolation and discharge procedure before any board work. -
How should a distributor distinguish a NXPP-03C board from a kit?
Identify NXPP-03C as the required board and separately state any base plate, spacers, shield or conversion-kit requirement. Do not assume a bare-board offer includes the complete conversion scope. -
What cabinet detail matters when quoting NXPP-03C?
Supply NXPP-03C, frame R12i, phase location and whether the V-phase is original or +V991, together with photographs. The inter-phase reference connection depends on that assembly context.
READY TO VERIFY YOUR PART?
Get a NXPP-03C quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
NXPP-03CDrive Distribution Circuit BoardManufacturer: ABBView Details
-
OFAF3H500Five-Hundred-Ampere Fuse LinkManufacturer: ABBView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
