PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- ABB
- ABB Electrical
- 1SAM201902R1001
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
1SAM201902R1001 HK1-11 auxiliary contact block
ABB 1SAM201902R1001 is an HK1-11 right-side auxiliary contact block for selected ABB manual motor starters. It provides one normally open and one normally closed auxiliary contact for control and indication circuits.
Its screw-terminal design mounts on the right side of compatible MS116, MS132 and MS165 starters, with up to two side blocks permitted. Verify the complete order code, starter frame, contact arrangement and conductor sizing before replacement.
Its screw-terminal design mounts on the right side of compatible MS116, MS132 and MS165 starters, with up to two side blocks permitted. Verify the complete order code, starter frame, contact arrangement and conductor sizing before replacement.
BEFORE YOU BUY
Confirm the complete hk1-11 auxiliary contact block
ACTUAL APPLICATIONS
Application context for 1SAM201902R1001
1SAM201902R1001 extends compatible motor starters with documented auxiliary contacts across manufacturing, pumping and material-handling systems.
-
01 · MANUFACTURING
Motor Control and Protection
Production motor startersMachine auxiliary circuits -
02 · WATER TREATMENT
Pumping and Treatment Systems
Pump motor controlTreatment equipment status -
03 · MATERIAL HANDLING
Conveyor and Sorting Systems
Conveyor motor startersSorting line interlocks
Technical specifications for 1SAM201902R1001
-
Product Model1SAM201902R1001
-
Product ParametersHK1-11 auxiliary contact block
-
In stock9 units
-
ManufacturerABB
-
Normally open contacts1
-
Normally closed contacts1
-
Mounting sideRight
-
Maximum side blocks2
-
Compatible startersMS116, MS132, MS165
-
Rated insulation voltage690 V
-
Impulse withstand voltage6 kV
-
Thermal current6 A
-
Terminal typeScrew terminals
-
Protection ratingIP20
-
Tightening torque0.8 to 1.2 N·m
-
Wire strip length8 mm
-
Operating temperature-25 to +60 ℃
-
Mechanical durability100,000 operations
-
Electrical durability100,000 operations
View all additional
Alternative Names
1SAM201902R1001
ABB Electrical HK1-11 auxiliary contact block
1SAM201902R1001 industrial spare
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 1SAM201902R1001 hk1-11 auxiliary contact block
1SAM201902R1001 is the documented hk1-11 auxiliary contact block for the ABB Electrical family. Its integration basis includes normally open contacts: 1, normally closed contacts: 1, and mounting side: right, so the connected circuit or network must be engineered to those exact limits.
The installed arrangement must also match maximum side blocks: 2, compatible starters: ms116, ms132, ms165, and rated insulation voltage: 690 v. Verify the mating terminal, conductor method, power group, and controller configuration before energizing the product, especially where a neighboring order code uses a different connection or channel arrangement.
During commissioning, apply the documented supply and interface conditions, test each affected channel or communication path separately, and compare field behavior with controller diagnostics. Record the final wiring, addressing, status indications, and measured results so the 1SAM201902R1001 configuration can be reproduced during future maintenance.
Features:
- Adds one normally open auxiliary signaling contact
- Adds one normally closed auxiliary signaling contact
- Reports manual motor starter switching status to control circuits
The 1SAM201902R1001 hk1-11 auxiliary contact block requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 1SAM201902R1001 hk1-11 auxiliary contact block
Use the complete 1SAM201902R1001 order code when replacing this hk1-11 auxiliary contact block; a similar housing or family number does not confirm interchangeability. Compare normally open contacts: 1, normally closed contacts: 1, and mounting side: right with the removed product and the current engineering record.
Before removal, document terminal numbers, cable routing, switch positions, mounting orientation, and adjacent module order. The replacement must also satisfy maximum side blocks: 2, compatible starters: ms116, ms132, ms165, and rated insulation voltage: 690 v, because these details determine whether the installed electrical and mechanical arrangement can be reproduced.
After fitting the verified 1SAM201902R1001, restore the controlled configuration and repeat the applicable continuity, signal, load, or network tests. Confirm normal status indication and controller diagnostics under the documented operating conditions, then retain the nameplate photographs, configuration record, and acceptance results with the asset history.
Features:
- Provides electrical interlocking for starter control sequences
- Supplies remote status feedback to a connected controller
- Supports alarm and permissive logic from starter position
The 1SAM201902R1001 hk1-11 auxiliary contact block requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Mounts on the right side of compatible ABB starters
- Expands starter signaling without changing the main device
- Keeps auxiliary conductors on dedicated screw terminals
Documentation for the 1SAM201902R1001 hk1-11 auxiliary contact block must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size0.90 × 9.00 × 7.85 cm
-
Shipping weight0.04 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8536508000
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 1SAM201902R1001
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which rating controls the right-side HK1-11 contact block?
Use the documented Normally open contacts 1, Normally closed contacts 1, and circuit limits for this exact right-side HK1-11 contact block. -
What must be matched before wiring the right-side HK1-11 contact block?
Match its complete order code, Normally open contacts 1, terminal method, and installed equipment interface. -
How should the right-side HK1-11 contact block be commissioned?
Test the right-side HK1-11 contact block one circuit or channel group at a time and record the observed status. -
Which compatibility check protects the right-side HK1-11 contact block replacement?
Confirm the stated Normally closed contacts 1, compatible system, terminal base, and engineering configuration. -
What should be photographed around the right-side HK1-11 contact block?
Capture labels, wiring positions, switches, adjacent hardware, and mounting orientation before removal. -
Which test record belongs with the right-side HK1-11 contact block?
Archive the continuity or signal test, configuration result, visible condition, and final acceptance status. -
What should an MRO buyer request for the right-side HK1-11 contact block?
Request the exact right-side HK1-11 contact block order code, required condition, quantity, destination, and inspection documents. -
How should a distributor inspect the right-side HK1-11 contact block?
Compare the label, construction, connections, and documented Normally open contacts 1 before releasing the shipment.
READY TO VERIFY YOUR PART?
Get a 1SAM201902R1001 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
