PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
07BT62R1 industrial module rack
ABB 07BT62R1 is a industrial module rack for the Procontic T200. It is used to procontic T200. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete industrial module rack
ACTUAL APPLICATIONS
Application context for 07BT62R1
Manufacturer documentation places the Industrial Module Rack in practical generic applications. The three cases below describe different operating tasks in which 07BT62R1 performs its documented product-family role with the configured companion equipment.
- 01 · MACHINERY MANUFACTURING
Maintain press sequencing during part change process control
In the automation chain for the feed systems, dies and safety interfaces, 07BT62R1 operates in its approved product-family role as a Industrial Module Rack. During part change, the system uses this function to apply the selected product recipe to the sequence, helping it produce the intended part without skipping an interlock. - 02 · AUTOMOTIVE
Govern paint-shop conveying during carrier accumulation
In the automation chain for the carrier tracking and booth interfaces, 07BT62R1 operates in its approved product-family role as a Industrial Module Rack. During carrier accumulation, the system uses this function to route carriers by production status, helping it preserve body order through the process. - 03 · GENERAL MANUFACTURING
Supervise automated storage during buffer release
Across the stacker cranes and storage positions, 07BT62R1 provides its specified system function as a Industrial Module Rack. During buffer release, the system uses this function to release material according to downstream availability, helping it prevent overfilling the next buffer.
Technical specifications for 07BT62R1
-
Product Model07BT62R1
-
Product Parametersindustrial module rack
-
In stock1 unit
-
ManufacturerABB
-
ManufacturerABB
-
Exact Article Code07BT62R1
-
Product FamilyProcontic T200
-
Component TypeIndustrial Module Rack
-
System ClassDCS System
-
Mounting FormatPlug-in control rack
-
System InterfaceABB Procontic rack bus
-
Control Supply24 V DC control class
-
Channel CapacityModel-defined channel set
-
Signal StandardSystem-specific I/O levels
-
Electrical IsolationIsolated field circuits
-
Operating Temperature0 to +55 °C cabinet range
-
Protection LevelIP20 control cabinet
-
Configuration Tool907 PC 332 engineering
-
Commissioning TestI/O and diagnostic functional test
View all additional
Alternative Names
07BT62R1
Procontic T200 industrial module rack
ABB industrial module rack
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 07BT62R1 to the installed Procontic T200
ABB 07BT62R1 is a industrial module rack used in the Procontic T200. Use 07BT62R1 in the specified Procontic T200 position with the documented supply, signal range and system interface. Match the complete article code and installed rack records before service.
Record terminal numbers, connector keying, rack position, shields and protective earth for 07BT62R1. Preserve the approved ABB configuration and cable routing during exchange. Confirm dcs system, plug-in control rack, the exact mechanical position and the approved system configuration before connection.
After fitting 07BT62R1, check power and module diagnostics, then test the affected I/O, communication, controller or measurement function at a safe operating point and record acceptance. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 07BT62R1
- Product class: industrial module rack
- Family: Procontic T200
The ABB 07BT62R1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 07BT62R1 identity before exchange
Replace 07BT62R1 only after matching the full article identity, industrial module rack, installed 24 v dc control class and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, system-specific i/o levels, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete i/o and diagnostic functional test. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 07BT62R1
- Connection: System-specific I/O levels
- Test: I/O and diagnostic functional test
The ABB 07BT62R1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 07BT62R1
- Installation checks matched to Procontic T200
- Exact ABB identity required before service
Documentation for ABB 07BT62R1 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size32 × 24 × 12 cm
-
Shipping weight2.4 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 07BT62R1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should technicians confirm the signal range for 07BT62R1?
Compare the connected field circuit with System-specific I/O levels and use calibrated test equipment before applying signals to 07BT62R1. -
Which electrical values must maintenance check on 07BT62R1?
Confirm 24 V DC control class, System-specific I/O levels, Isolated field circuits and protective earth before connecting 07BT62R1. -
What commissioning result releases 07BT62R1 for service?
For 07BT62R1, complete the I/O and diagnostic functional test, confirm normal diagnostics and record the affected equipment response. -
What companion hardware must match 07BT62R1?
Verify the rack, controller, power supply, bus coupler, terminal assembly and adjacent modules documented for 07BT62R1. -
What installed-system evidence is needed before replacing 07BT62R1?
Archive the rack drawing, connection photographs, project or configuration backup and current diagnostics before removing 07BT62R1. -
Can a visually similar module directly replace 07BT62R1?
Physical similarity is insufficient; a replacement for 07BT62R1 must match the full code, family, interface, signal range and approved configuration. -
Which diagnostics should be reviewed after installing 07BT62R1?
Review power, communication and module status indications for 07BT62R1, then clear only faults resolved by the completed work. -
Which article-code details should engineering verify for 07BT62R1?
For 07BT62R1, match the complete ABB article code, Procontic T200, component type and installed position.
READY TO VERIFY YOUR PART?
Get a 07BT62R1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
