PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
200-ACN industrial network adapter
ABB 200-ACN is a industrial network adapter for the Series 200. It is used to sery 200. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete industrial network adapter
ACTUAL APPLICATIONS
Application context for 200-ACN
Manufacturer documentation places the Industrial Network Adapter in practical network applications. The three cases below describe different operating tasks in which 200-ACN performs its documented product-family role with the configured companion equipment.
- 01 · WATER & WASTEWATER
Observe plant-data uplink during scheduled data collection
During operation of the control servers, historians and reporting systems, 200-ACN performs its assigned control role as a Industrial Network Adapter. During scheduled data collection, the system uses this function to separate reporting traffic from the control network, helping it deliver operating records without delaying control messages. - 02 · GENERAL MANUFACTURING
Synchronize shuttle-system communication with Industrial Network
For the coordinated operation of the shuttle PLCs, safety devices and supervisory systems, 200-ACN operates in its approved product-family role as a Industrial Network Adapter. During aisle-controller restart, the system uses this function to restore cyclic control data to the shuttle aisle, helping it return the aisle to coordinated operation. - 03 · AUTOMOTIVE
Coordinate robot-cell networking during model change
During operation of the robot controllers, safety devices and PLCs, 200-ACN performs its assigned control role as a Industrial Network Adapter. During model change, the system uses this function to exchange interlocks and production status across the cell, helping it start the correct joining sequence.
Technical specifications for 200-ACN
-
Product Model200-ACN
-
Product Parametersindustrial network adapter
-
In stock1 unit
-
ManufacturerABB
-
Exact Article Code200-ACN
-
Product FamilySeries 200
-
Component TypeIndustrial Network Adapter
-
System ClassDCS System
-
Mounting FormatPlug-in control rack
-
System InterfaceSeries 200 I/O bus
-
Control Supply24 V DC I/O supply
-
Channel CapacityModel-defined channel set
-
Signal StandardSystem-specific I/O levels
-
Electrical IsolationIsolated field circuits
-
Operating Temperature0 to +55 °C cabinet range
-
Protection LevelIP20 control cabinet
-
Configuration ToolAdvant engineering tools
-
Commissioning TestI/O and diagnostic functional test
View all additional
Alternative Names
200 ACN
Series 200 industrial network adapter
ABB industrial network adapter
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 200-ACN to the installed Series 200
ABB 200-ACN is a industrial network adapter used in the Series 200. Use 200-ACN in the specified Series 200 position with the documented supply, signal range and system interface. Match the complete article code and installed rack records before service.
Record terminal numbers, connector keying, rack position, shields and protective earth for 200-ACN. Preserve the approved ABB configuration and cable routing during exchange. Confirm dcs system, plug-in control rack, the exact mechanical position and the approved system configuration before connection.
After fitting 200-ACN, check power and module diagnostics, then test the affected I/O, communication, controller or measurement function at a safe operating point and record acceptance. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 200-ACN
- Product class: industrial network adapter
- Family: Series 200
The ABB 200-ACN requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 200-ACN identity before exchange
Replace 200-ACN only after matching the full article identity, industrial network adapter, installed 24 v dc i/o supply and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, system-specific i/o levels, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete i/o and diagnostic functional test. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 200-ACN
- Connection: System-specific I/O levels
- Test: I/O and diagnostic functional test
The ABB 200-ACN requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 200-ACN
- Installation checks matched to Series 200
- Exact ABB identity required before service
Documentation for ABB 200-ACN must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size23.3 × 30 × 6.3 cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 200-ACN
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How should configuration data be protected before a 200-ACN exchange?
Save the approved ABB project, program, parameter set or rack configuration that identifies 200-ACN before exchange. -
What maintenance evidence should remain with 200-ACN?
Keep receiving inspection, connection records, configuration backup, measured values, diagnostic results and final acceptance for 200-ACN. -
What receiving inspection applies to 200-ACN?
Inspect the exact 200-ACN label, housing, terminals, connectors and packaging; reject damage, contamination or unreadable markings. -
What cabinet conditions should be checked around 200-ACN?
Check clearance, ventilation, mounting security, cabinet temperature and access around 200-ACN before energising. -
Which nameplate photographs help source 200-ACN?
Provide clear photographs of the complete 200-ACN nameplate, revision markings, connectors and installed rack position. -
How should a distributor quote the complete 200-ACN identity?
Specify ABB 200-ACN, quantity, Series 200, destination and required PDF scope in the quotation request. -
Which ABB family documentation applies to 200-ACN?
Use the ABB documentation for Series 200 and confirm that the exact 200-ACN code appears in the applicable hardware scope. -
How should technicians confirm the signal range for 200-ACN?
Compare the connected field circuit with System-specific I/O levels and use calibrated test equipment before applying signals to 200-ACN.
READY TO VERIFY YOUR PART?
Get a 200-ACN quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
