PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
DTU-G Flush-mounted operator terminal unit
ABB DTU-G is a flush-mounted terminal unit identified on the existing article as GVSB293923V0002 / 9600 021 45101. It provides a local interface within its documented ABB control installation.
Because DTU-G assemblies can be tied to project-specific wiring and panel functions, match every identity marking and the installed connector allocation before exchange. Preserve terminal labels and panel records, then verify indications and local controls during controlled commissioning.
Because DTU-G assemblies can be tied to project-specific wiring and panel functions, match every identity marking and the installed connector allocation before exchange. Preserve terminal labels and panel records, then verify indications and local controls during controlled commissioning.
BEFORE YOU BUY
Confirm the complete flush-mounted operator terminal unit
ACTUAL APPLICATIONS
Application fields for DTU-G
DTU-G is used across compatible installations in the following broad industrial application fields, subject to verified system design and operating requirements.
-
03 · POWER GENERATION
Thermal, Hydroelectric and Renewable Power Generation
Thermal and hydroelectric power productionRenewable generation and energy integration -
03 · PULP & PAPER
Pulp Production and Paper Product Manufacturing
Pulp and fibre productionPaper and packaging material manufacturing -
03 · WATER & WASTEWATER
Municipal Water Supply and Industrial Wastewater Treatment
Municipal water treatment servicesIndustrial wastewater treatment operations
Technical specifications for DTU-G
-
Product ModelDTU-G
-
Spare Model9600 021 45101
-
Product ParametersFlush-mounted operator terminal unit
-
ManufacturerABB
-
ModelDTU-G
-
ABB articleGVSB293923V0002
-
Additional article9600 021 45101
-
MountingFlush mounted
-
Product classOperator terminal unit
-
Interface roleLocal operator interface
-
IntegrationProject-specific panel wiring
View all additional
Alternative Names
DTU-G
ABB flush-mounted operator terminal unit
ABB industrial control and communication equipment flush-mounted operator terminal unit
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate DTU-G flush-mounted operator terminal unit
Use DTU-G only in the documented ABB industrial control and communication equipment configuration. Match the complete article identity, installed position and associated hardware before connection.
Record connector orientation, terminal allocation, cable labels, shielding, protective earth and the approved configuration before removing the installed item.
After installation, restore the controlled configuration and complete power-up, diagnostic and functional checks at a safe operating point. Retain the results with the maintenance record.
Features:
- Exact identity: DTU-G
- Family: ABB industrial control and communication equipment
- Documented integration and testing
DTU-G requires documented system integration before energising the equipment.
INTERCHANGEABILITY
Verify DTU-G before replacement
Match DTU-G in full. Similar family names or physical outlines do not establish interchangeability.
Preserve the installed location, connector allocation, settings, wiring records and service history before removal.
After installation, inspect diagnostics and prove every affected channel, communication path or protection function under the approved commissioning procedure.
Features:
- Match DTU-G exactly
- Record connections and settings before removal
- Complete controlled post-installation tests
DTU-G requires replacement verification against the installed hardware and configuration.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Match documents to the complete product identity
- Use the applicable manufacturer family instructions
- Additional documents are supplied only when quoted
Documentation for DTU-G must be checked against the installed configuration before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
- Product size8 × 28.3 × 2 cm
-
Net weight0.5 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538909100
-
OriginSwitzerland
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about DTU-G
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is DTU-G?
DTU-G is a flush-mounted operator terminal unit for the ABB industrial control and communication equipment. -
Which identity must be used when ordering DTU-G?
Use the complete DTU-G marking and compare it with the installed label and project records. -
Can a similar family item replace DTU-G?
No automatic substitution should be made; verify the complete code, interfaces, revision and approved configuration. -
What should be recorded before removing DTU-G?
Record the installed position, connector and terminal allocation, cable labels, settings and diagnostic state. -
What should be inspected when DTU-G arrives?
Inspect the label, housing, connectors, terminals and packaging for correct identity and condition. -
Which checks follow installation?
Restore the approved configuration and complete controlled power-up, diagnostic and functional tests. -
What information should accompany a quotation?
Provide the complete model, quantity, clear label photographs, destination and required delivery date. -
Which documentation applies?
Use the manufacturer documentation for ABB industrial control and communication equipment and confirm that its scope covers the installed configuration.
READY TO VERIFY YOUR PART?
Get a DTU-G quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
DTU-GFlush-mounted operator terminal unitManufacturer: ABBView Details
-
NINT-72C 64425552ACONTROL CARDManufacturer: ABBView Details -
Manufacturer: ABBView Details -
Manufacturer: ABBView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
