PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- AI‑Tek
- 70085-1010-412
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
70085-1010-412 PASSIVE VARIABLE RELUCTANCE SPEED SENSOR
AI-Tek 70085-1010-412 passive variable-reluctance speed sensor serves the 70085 Series magnetic-pickup range. Its threaded stainless pickup body, internal magnetic sensing assembly and wire leads form a self-generating speed-measurement channel. Passing ferrous target teeth vary the magnetic flux at the sensing tip and induce an AC voltage whose frequency follows target speed. The resulting signal supports rotational-speed indication, zero-speed detection and overspeed protection without an external sensor supply.
BEFORE YOU BUY
Confirm the complete AI-Tek speed sensor
Technical specifications for 70085-1010-412
-
Product Model70085-1010-412
-
Spare Model70085-1010-412
-
Product ParametersPASSIVE VARIABLE RELUCTANCE SPEED SENSOR
-
In stock1 unit
-
ManufacturerAI‑Tek
-
ManufacturerAI-Tek Instruments
-
Model70085-1010-412
-
Product Series70085 Series
-
Sensor PrinciplePassive variable reluctance
-
Mounting Thread5/8-18 UNF
-
Guaranteed Output13.4 V p-p
-
Electrical TerminationWire leads
-
Thread Length6.00 in
-
Overall Sensor Length7.25 in
-
Operating Temperature-65 to +95 °C
View all additional
Alternative Names
AI-Tek 70085-1010-412
70085 Series speed sensor 70085-1010-412
Passive magnetic pickup 70085-1010-412
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SPEED SENSOR INTEGRATION
Match 70085-1010-412 to the documented speed-pickup position
AI-Tek 70085-1010-412 passive variable-reluctance speed sensor uses the 70085 Series threaded pickup format. Match the 5/8-18 thread, insertion depth, target geometry and wire termination to the installed measurement point.
Set the sensing gap to the equipment drawing and route the leads away from high-current conductors. Confirm the connected speed monitor accepts the passive magnetic-pickup signal and the expected voltage at operating speed.
After installation, rotate the target under controlled conditions and verify signal amplitude, polarity, speed indication and alarm response. Record the final gap and measured output with the machine service data.
Features:
- Exact identity: 70085-1010-412
- Sensor type: passive variable reluctance
- Series: AI-Tek 70085
AI-Tek 70085-1010-412 requires the documented 5/8-18 mounting position, sensing gap, target geometry and passive speed-monitor input before commissioning.
REPLACEMENT CONTROL
Verify the complete 70085-1010-412 dimensions and output before exchange
Replace 70085-1010-412 only after matching the complete AI-Tek model, 5/8-18 mounting thread, 6 in thread length, 7.25 in overall length and wire termination. A similar pickup body does not establish the same fit or signal performance.
Before removal, measure the installed air gap and record the target-tooth geometry, cable route, lead polarity and monitor terminals. Inspect the mounting bore and target surface for damage or contamination.
Fit the verified sensor without contacting the rotating target, restore the documented gap and confirm a stable speed signal across the operating range. Complete the machine overspeed or zero-speed functional check where applicable.
Features:
- Exact identity: 70085-1010-412
- Sensor type: passive variable reluctance
- Series: AI-Tek 70085
Replacement AI-Tek 70085-1010-412 must match the 70085 Series mechanical dimensions, wire termination, output characteristics and installed speed-monitor interface.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official AI-Tek reference documents are provided for the exact 70085-1010-412 identity. Confirm the installed target geometry, sensing gap and connected speed-monitor input before service.
Features:
- Technical values prepared for 70085-1010-412
- Product class: passive variable-reluctance speed sensor
- Exact AI-Tek 70085 Series identity required before installation
Documentation for AI-Tek 70085-1010-412 must match the 70085 Series pickup dimensions, wire termination, sensing gap and installed speed-monitor input.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 70085-1010-412
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is the complete configuration of 70085-1010-412 verified?
This record preserves 70085-1010-412 without interpreting unverified suffixes or modification codes. Compare the complete nameplate and controlled assembly documentation before ordering, installing or substituting the item; a similar base number does not establish interchangeability. -
Can a similar base number establish compatibility?
Compatibility and replacement equivalence remain unconfirmed for the complete supplied identity. Manufacturer-controlled documentation or an exact assembly record is required before the item can be assigned to a particular monitoring system. -
Are installation values available for this exact identity?
Installation requirements have not been verified for this complete identity. Do not derive wiring, mounting torque, hazardous-area suitability or operating limits from another product with a similar number.
READY TO VERIFY YOUR PART?
Get a 70085-1010-412 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
