PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- AVG Automation
- TSX Quantum DeviceNet
- 140SAC-QDNET-010
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
140SAC-QDNET-010 DeviceNet scanner module
AVG Automation 140SAC-QDNET-010 is a DeviceNet scanner for TSX Quantum racks. It links the Quantum host with a DeviceNet trunk/drop network containing up to 63 slave nodes.
The scanner supports 125, 250 and 500 kbit/s network rates and 8- or 32-register I/O modes. Configuration uses an RS-232 port; the module requires a 5 V backplane connection and a separate nominal 24 V DC DeviceNet supply.
The scanner supports 125, 250 and 500 kbit/s network rates and 8- or 32-register I/O modes. Configuration uses an RS-232 port; the module requires a 5 V backplane connection and a separate nominal 24 V DC DeviceNet supply.
BEFORE YOU BUY
Confirm the complete devicenet scanner module
ACTUAL APPLICATIONS
Application context for 140SAC-QDNET-010
140SAC-QDNET-010 supports compatible TSX Quantum DeviceNet installations across the application categories below, subject to system configuration.
-
01 · WATER & WASTEWATER
Municipal Water Supply and Industrial Wastewater Treatment
Drinking Water TreatmentWastewater Resource Recovery -
02 · FOOD & BEVERAGE
Food Production and Beverage Manufacturing
Dairy ManufacturingBrewing and Distilling -
03 · PULP & PAPER
Pulp Production and Paper Product Manufacturing
Wood Pulp ManufacturingSpecialty Paper Manufacturing
Technical specifications for 140SAC-QDNET-010
-
Product Model140SAC-QDNET-010
-
Product ParametersDeviceNet scanner module
-
In stock1 unit
-
ManufacturerAVG Automation
-
Network data capacity28 words in 8-I/O mode; 124 words in 32-I/O mode
-
Supported slave nodesUp to 63
-
Network addresses00 to 63
-
Data rate125, 250 or 500 kbit/s
-
I/O register modes8 or 32 input/output registers
-
Backplane current400 mA maximum at 5 V DC
-
DeviceNet load current90 mA maximum
-
Network supply24 V DC nominal
-
Physical networkDeviceNet trunk/drop topology
-
Configuration portRS-232 serial
-
Operating temperature0 to 60 deg C
-
Storage temperature-40 to 85 deg C
-
Humidity5 to 95%, non-condensing
-
Messaging modesPoll, Strobe, Change-of-State or Cyclic
-
Network isolationOptical isolation from backplane
View all additional
Alternative Names
140SAC-QDNET-010
TSX Quantum DeviceNet DeviceNet scanner module
Quantum DeviceNet 28 words in 8-I/O mode; 124 words in 32-I/O mode network data capacity
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 140SAC-QDNET-010 devicenet scanner module
140SAC-QDNET-010 provides the documented function of a DeviceNet scanner module in the TSX Quantum DeviceNet platform. Match the complete article and revision with the host architecture before engineering approval.
Select the 8- or 32-register I/O mode to match the PLC application. The respective network-data capacities are 28 or 124 input/output words, with Poll, Strobe, Change-of-State or Cyclic messaging for configured nodes.
Apply the documented connection and supply limits, validate data rate (125, 250 or 500 kbit/s) and retain the completed test record with the system documentation.
Features:
- Match the 8- or 32-register PLC mapping
- Allocate up to 63 DeviceNet slave nodes
- Set a common 125, 250 or 500 kbit/s rate
The 140SAC-QDNET-010 devicenet scanner module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 140SAC-QDNET-010 devicenet scanner module
Record the full 140SAC-QDNET-010 identity, installed revision, wiring and configuration before removal. Isolate the applicable power and field circuits under the site maintenance procedure.
Compare the replacement article's i/o register modes (8 or 32 input/output registers) and backplane current (400 mA maximum at 5 V DC) with the removed unit and purchase record.
After installation, inspect connection integrity, confirm devicenet load current (90 mA maximum) and verify network supply (24 V DC nominal) before return to service.
Features:
- Record i/o register modes: 8 or 32 input/output registers
- Inspect backplane current: 400 mA maximum at 5 V DC
- Test network supply: 24 V DC nominal
The 140SAC-QDNET-010 devicenet scanner module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 140SAC-QDNET-010 devicenet scanner module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size25.0 x 4.0 x 10.4 cm
-
Shipping weight0.34 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8517620000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 140SAC-QDNET-010
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Who manufactured the Quantum scanner 140SAC-QDNET-010?
140SAC-QDNET-010 is documented by AVG Automation / Autotech Controls for TSX Quantum. Quantum host compatibility does not make Schneider Electric the scanner manufacturer. -
How should a duplicate DeviceNet address be resolved on 140SAC-QDNET-010?
Give 140SAC-QDNET-010 a unique address in the documented 00 to 63 range and verify the saved node assignment against the network plan. -
Why must register mode match the PLC mapping for 140SAC-QDNET-010?
140SAC-QDNET-010 supports 8- or 32-register I/O modes. Match the scanner mode with the Quantum application mapping before exchanging data. -
Which link is used to configure 140SAC-QDNET-010 locally?
Use the documented RS-232 configuration connection for 140SAC-QDNET-010; it is separate from the DeviceNet trunk/drop field connection. -
What checks help restore a disconnected 140SAC-QDNET-010 segment?
Check the 24 V DC DeviceNet supply, trunk/drop connections and the selected 125, 250 or 500 kbit/s rate on 140SAC-QDNET-010 against the attached devices. -
Can a full 63-node layout be assumed ready on 140SAC-QDNET-010?
Although 140SAC-QDNET-010 supports up to 63 slave nodes, confirm each configured device and its I/O allocation before accepting the network configuration. -
What must a distributor identify when quoting 140SAC-QDNET-010?
Quote the complete 140SAC-QDNET-010 AVG Automation article and request the installed Quantum rack, scanner configuration and DeviceNet rate to avoid a similarly named host component. -
Which supply checks belong in incoming inspection for 140SAC-QDNET-010?
Check the 140SAC-QDNET-010 label and connectors, then reconcile its 5 V backplane requirement and separate 24 V DeviceNet supply with the intended installation.
READY TO VERIFY YOUR PART?
Get a 140SAC-QDNET-010 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
