Accessories

Driver Board

Input Voltage (Logic):24V DC (±10%)
Output Drive Voltage:15V–20V 
Max. Switching Frequency:20 kHz
Isolation Voltage:2500V AC 
Propagation Delay: <500 ns
Operating Temperature:-20°C to +70°C
Storage Temperature:-40°C to +85°C

APPLICATION BOARD

Supply Voltage:24V DC 
Power Consumption:< 2W
Isolation:500V AC
Operating Temp:-25°C to +70°C
Storage Temp:-40°C to +85°C
Humidity:5–95% (non-condensing)

MEASUREMENT BOARD

Input Types: 4–20 mA
Resolution: 16-bit ADC
Power Supply: 24 V DC ±10%
Voltage/Current: ±0.05%
RTD/Thermocouple: ±0.1°C 
Operating Temperature: -25°C to +70°C
Vibration: 2 g @ 10–150 Hz
Relative Humidity: ≤95% RH (non-condensing)

CANopen Adapter Module

Product Type:CANopen Slave Interface Module
Catalog Number:160-NCAN-02C
Compatible Networks:CANopen
Power Supply:24V DC (±10%), 120 mA typical
Terminals:5-pin removable screw terminal

Drive power board

Input Voltage:3-phase 380-480V AC (±10%)
Output Voltages:+24V DC (control)
Power Capacity:500W (continuous)
Switching Frequency:20kHz (PWM)
Efficiency:>92% (at full load)

Inverter Memory Card

Memory Type:Flash EEPROM
Storage Capacity:2MB
Write Cycles:100,000 cycles
Interface:Proprietary ABB connector
Operating Voltage:3.3V DC (supplied by drive)
Power Consumption:<50mA
ESD Protection:±8kV contact discharge

Memory Unit Kit

Type:MEMORY UNIT KIT
Name:ZMU-02
ID:3AXD50000006010
Operating Temperature:
-20°C to +70°C
Storage Temperature:
-40°C to +85°C

NPOW-41 Power Supply Board

NPOW41
ASEA BROWN BOVERI
NPOW-41
POWER SUPPLY BOARD

Profibus Adapter Module

Enclosure: Plastic
Mounting: Onto a standard mounting rail
Settings: Via drive interface (control panel)
Current Consumption: 70 mA at 24 V d.c
All materials are UL/CSA approved
Complies with EMC Standards EN 50081-2 and EN 50082-2