Allen-Bradley

POINT I/O Terminal Module

Part Number/Catalog No.:1734-CTM
Series:POINT I/O
Module Type:Terminal Module
Isolation Voltage:250 Volts Continuous
Field Power Supply:1-28.8 Volts DC or 12/240 Volts AC
Field Power Supply Current:4 amps/module

Compact 5000 analog input module

Overvoltage protection, max:± 30V DC
Overcurrent protection, max:±30 mA
Open circuit detection time:2 seconds
Module Keying:Electronic
Number of Inputs:8 Differential Inputs
Number of Outputs:N/A
Voltage Category:N/A
Input Voltage Range:+/- 10 Volts, 0-10 Volts, 0-5 Volts
Output Voltage Range:N/A
Power Dissipation:2.1 Voltage Mode and 2.4 Current Mode
Enclosure Type:None (Open Style)

Guard Locking Proximity Inputs Safety Relay

Product Type: Safety Relay
Model Number: 440R-GL2S2P
Series: Guardmaster
Input Voltage: 24V DC
Voltage Tolerance: -15% to +10%
Current Consumption: Approx. 200mA
Power Consumption: Typically 4.8W
Relay Output Type:
Safety Outputs: 2 NO
Auxiliary Outputs: 1 NC 

SMC Flex Smart Motor Controller

Product Line:SMC-Flex
Part Number/Catalog No.:150-F43NBD
Bulletin Number:Solid-State Controller
Controller Ratings:480 Amps, 
400 Horsepower at 460 Volts AC
Input Line Voltage:200 to 460 Volts AC
Control Voltage:120 / 240 VAC
Rated Voltage:500 to 575 Volts AC

Digital DC Sinking Output Module

Series:POINT I/O
Module Type:Digital DC Sinking Output Modules
Outputs:8
Output Voltage:24 Volts DC
Electronically Protected:Yes
POINTBus Current:75 milliamps
Output Current:3 amps/module
Power Dissipation:2 Watts

Analog output module

Series:PLC series
Data Format:BDC or Natural Binary
No. of channels:Four (4) isolated channels
Output signal:+/- 10 VDC
Voltage Range:1-5 V dc, 0-10 V dc, +/- 10 V dc
Output signal ranges:+1 to +5 VDC; -10 to +10 VDC and 0 to +10 VDC
Current Range:N/A
Module resolution:12 bits
Backplane Current:1.5 Miliamperes

DEVICENET TO ETHERNET GATEWAY

Model Number: XM-500, 1440-GWEN2DN
Input Voltage: 24V DC 
Power Consumption: < 5W 
Operating Temperature: -20°C to 60°C (-4°F to 140°F)
Storage Temperature: -40°C to 85°C (-40°F to 185°F)
Humidity Range: 5% to 95% 

FlexLogix Extended-local IO Adapter

Product Type:FlexLogix Extended-local IO Adapter
Input Voltage:24V DC
Input Current:0.39A max. @ 19.2V DC; 0.25A max. @ 24V DC
Input Voltage Range:19.2-31.2V DC
Flexbus Output Current:653mA max. @ 5.1V DC
Isolation Voltage:30V DC
Power Connector Torque:0.6-0.8 Nm
Power Dissipation:7.5W max @ 19.2V; 6.0W max. @ 24V DC
Thermal Dissipation:25.6 BTU/hr. @ 19.2V

power supply module

Nom Input Voltage:220 Volts AC
Input Voltage Range:194-264 Volts AC
Max Real Input Power:56 Watts
Max Apparent Input Power:89 VA
Max Xformer Load:140 VA
User Output Current:N/A
Backplane Output Current:8 Amperes (at 5 Volts DC)
Frequency:47-63 Hertz

Kinetix 300 Servo Drive

120 Volts Doubler Mode:Yes
Continuous Output Current (0-peak):5.7 Amperes
Integrated AC (EMC) Line Filter:No
Input Voltage:120/240 Volts (AC), 1 Phase
Power Rating:800 W
Part Number/Catalog No.:2097-V31PR2-LM
Safe Torque-Off:Yes

ARMOR WELDBLOCK

ARMOR WELDBLOCK
16 POINT CONFIGURABLE
QUICKCONNECT
5-PIN AUXILIARY POWER CONNECTOR
SCREW MOUNTED

DeviceNet Scanner Module

Module Width:Single Slot
Compatible controllers:SLC 5/02 or later
Pass through:Supported
Communication Port:One (1) DeviceNet
Data Transfer speed:125Kbps
Storage Temperature:-40 to 85 C (-40 to 185 F)
Vibration:Tested 5 g @ 10-500Hz per IEC 68-2-6
Operating Shock:30 g peak acceleration, 11(+1)ms pulse width
Series:SLC 500
Module Type:DeviceNet Scanner Module
Scan I/O:Yes
Backplane Current (5 Volts):500 milliamps

Process Module

PROCESS MODULE
XM-360
6-CHANNEL INPUT
0-10 VDC/0-20 MA INPUT RANGE
4-20 MA OUTPUT
600 OHM MAX LOAD
STATUS INDICATORS
RS-02232 VIA MINI-CONNECTOR
COMM RATE FIXED @ 19.2 KBPS
STANDARD DEVICENET NETWORK

POINT I/O Analog Input Module

Series:POINT I/O
Module Type:Analog Input Module
Inputs:2 single-ended, non-isolated, voltage
Signal Type:Voltage
Conversion Type:Delta Sigma
Absolute Accuracy:0.1% Full Scale @ 25 °C (77 °F)
Data format:Signed Integer
Key Switch Position:3
Enclosure Type Rating:Open

DC-powered sink output module

Module Type:Digital DC Output Module
Number of Outputs:32 (4 sets of 8) Outputs
Voltage Category:10-32 Volts DC, Sink
DC Operating Voltage:10-30 Volts
Backplane Current:330 Miliamperes
Max Continuous Current Per Output:0.5 Amperes
Max Continuous Current Per Module:8 Amperes
Wiring Arm:1771-WH
Coating:Conformal Coat
Typical AC Signal Delay (Off):45 (+/- 15) ms

Stratix 5700 managed Ethernet switch

Part Number:1783-BMS06SL
Product type:Managed Ethernet switch
Ports:6
Copper ports:4
Fiber ports:2
Input voltage:12 to 48 Volts DC
Operating temperature:-40 to 60 degrees Celsius

ArmorBlock MaXum I/O Cable

ArmorBlock 
MaXum I/O Cable 
Base with 18 mm 
round media connectors 
and jumpered DeviceNet power

4-Ch Universal Analog Inputs

Input Types:4 V, C, or 3 TC, or 2 RTD, Resistance
Resolution:18 bits
Input Overvoltage Protection:+24 VDC continuous
Input Overcurrent Protection:32 mA continuous
Backplane Current Required:15 mA at 5 V maximum  20 mA at 24 V maximum
Common Mode Rejection:<96 dB at 50/60 Hz
Normal Mode Rejection:65 dB to 74 dB at 50/60 Hz
Thermal Dissipation:1.00 Watt, maximum

4-Ch Universal Analog Inputs

Input Types:4 V, C, or 3 TC, or 2 RTD, Resistance
Resolution:18 bits
Input Overvoltage Protection:+24 VDC continuous
Input Overcurrent Protection:32 mA continuous
Backplane Current Required:15 mA at 5 V maximum  20 mA at 24 V maximum
Common Mode Rejection:<96 dB at 50/60 Hz
Normal Mode Rejection:65 dB to 74 dB at 50/60 Hz
Thermal Dissipation:1.00 Watt, maximum

ControlNet Ex communication adapter

I/O Capacity:8
Communication Rate:5 Mbps
Output Power:5.4 Volts DC
Power Supply:9.5 Volts DC
Power Consumption:8.5 W
Power Dissipation:8.5 W
Thermal Dissipation:29 BTU/hour

Thermocouple I/O Module

Product Type:FLEX Ex RTD Thermocouple I/O Module
Inputs:8
Input Type:Internal Bus Configurable
Signal Input Range:40 to 100 millivolts
Lead Resistance Compensation:15 Watts maximum
Settling Time:8 milliseconds
Module Field-side Power Consumption:1.6 Watts
Power Dissipation:1.6 Watts
Thermal Dissipation:5.46 BTU/hour maximum
Power Supply:9.5 Volts DC

Standard Cable

Kinetix Drives 20m Standard Cable

Flex I/O Pulse counter module

ON state Voltage, min:6VDC
ON state Voltage, max.26.4VDC
ON state Voltage, nom:24VDC
Enclosure:Open-type
Operating Temperature:0 to 55 C (32 to 131 F)
Storage Temperature:-40 to 85 C (-40 to 185 F)
Vibration: 5g @ 10 to 500 Hz
Operating Shock:30 g
Product Type:Flex I/O 4 Channel Pulse Counter Module
Inputs:2 per Interface
Pulse Counter Interfaces:4

FLEX I/O module

Part Number:1794-IF8IH
Outputs:None
Inputs:8
Input type:single-ended, non-isolated
Operating temperature:32 to 131 degrees Fahrenheit
Enclosure:Open
Conversion:Sigma Delta
Dimensions:3.7 x 3.7 x 2.6 inches
External DC voltage rating:19.2 to 31.2 Volts DC

Compact 5000 Discrete high-current output module

Series:Compact 5000 I/O
No. of Outputs Eight (8) DC output channels
Output Voltage signal, nominal:24VDC
Output Voltage Signal range:10-32VDC
Pulse width, min:200 µs @ 0.5 A @ 25 °C (77 °F)
No. of output groups:Two (2)
Number of Outputs:8 (2 Groups of 4) Channels
Voltage Category:24 Volts DC
Input Voltage Range:N/A
Output Voltage Range:10-32 Volts DC
Power Dissipation:3.2 Watts