


























PowerFlex 753 AC Drive
                                                    
                                                    
                                                        
                                                        Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:260 Amps, 132kW ND, 110kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered, 
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
                                                    
                                                
PanelView Plus 6 Operator Terminal
                                                    
                                                    
                                                        
                                                        Manufacturer:Rockwell Automation
Product Family:PanelView Plus 6 Operator Terminal
Memory:512 MB Flash/ 512 MB RAM 
Compatible Hardware:PanelView Plus 6 700-1500
Status indicators:Red and Green LED
Interfaces:Ethernet port, serial port, two USB ports
CompactFlash card slot
Marine Certified:Yes
Operating Temperature:0-55 Degree Celsius
Power input:24VDC
Power Dissipation:70 Watts
                                                    
                                                
ControlLogix Discrete output module
                                                    
                                                    
                                                        
                                                        Outputs:16-Points
Module Type:Digital AC Output Module
Voltage:120-140 Volts AC
No. of Outputs	Sixteen (16) mechanically fused
Voltage Category:120 / 240 Volts AC
Operating Voltage Range:74-265 Volts AC
Backplane Current at 5 Volts:400 mA
                                                    
                                                
Generic Servo Interface Module
                                                    
                                                    
                                                        
                                                        Series:ControlLogix
Module Type:Generic Servo Interface Module
Axes per Module:8
Axes per Controller:32
Backplane Current (5Volts):760 milliamps
Backplane Current (24Volts):2.5 milliamps
Power Dissipation:6.2 Watts
SERCOS Data Rate:4 or 8 Megabits-Second
Current Draw (5.1 Volts):1.2 amps
Thermal Dissipation:21.2 BTU-hour
Isolation Voltage:50 Volts Continuous
                                                    
                                                
PowerFlex 753 AC Drive
                                                    
                                                    
                                                        
                                                        Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:205 Amps, 110kW ND, 90kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
CM jumper installed (preferred)
                                                    
                                                
PowerFlex 753 AC Drive
                                                    
                                                    
                                                        
                                                        Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:205 Amps, 110kW ND, 90kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
CM jumper installed (preferred)
                                                    
                                                
PowerFlex 753 AC Drive
                                                    
                                                    
                                                        
                                                        Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:170 Amps, 90kW ND, 75kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
CM jumper installed (preferred)
                                                    
                                                
PowerFlex 753 AC Drive
                                                    
                                                    
                                                        
                                                        Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:170 Amps, 90kW ND, 75kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
M jumper installed (preferred)
Dynamic Braking:DB Transistor
HIM Blank (No HIM)
                                                    
                                                
PowerFlex 753 AC Drive
                                                    
                                                    
                                                        
                                                        Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:140 Amps, 75kW ND, 55kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
                                                    
                                                
PowerFlex 753 AC Drive
                                                    
                                                    
                                                        
                                                        Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:140 Amps, 75kW ND, 55kW HD
Enclosure Type:Open Type
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 6
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:None
                                                    
                                                
Armor ControlLogix Controller
                                                    
                                                    
                                                        
                                                        Series:ControlLogix
Module Type:Armor ControlLogix Controller
Standard Memory:4 Megabytes
I/O Memory:0.98 Megabytes
Max Total I/O:128,000
Max Analog I/O:4000
Max Digital I/O:128,000
Ethernet Ports:4 Ethernet M12 Category 5E
USB Ports:USB 1.1 Full Speed (12 Mbps)
Nom Input Voltage:24 Volts DC
Input Voltage Range:18-32 Volts DC
                                                    
                                                
Digital Input Module
                                                    
                                                    
                                                        
                                                        Series:ControlLogix
Module Type:Isolated Digital Input Module
Inputs:16 Individually Isolated Inputs
Input Voltage:240 Volts AC
Operating Voltage Range:159-265 Volts AC
Input Delay Time:Programmable 9 or 18 milliseconds
                                                    
                                                
ControlLogix Lithium Battery Assembly
                                                    
                                                    
                                                        
                                                        Series:ControlLogix
Battery Type:Externally Mounted
Power Dissipation (Max):4.5 Watts
Mounting:Horizontal
Enclosure:Open
Backplane Current (5 Volts DC):10 amps
Backplane Current (24 Volts DC):2.8 Amps
                                                    
                                                
DC Output Module
                                                    
                                                    
                                                        
                                                        Series:ControlLogix
Module Type:Electronic Fused DC Output Module
Outputs:16-Point Electronically Fused
Voltage:12-24 Volts DC
Operating Voltage Range:10-30 Volts DC
Backplane Current at 5 Volts:250 milliamps
                                                    
                                                
ControlLogix Diagnostic DC Output Module
                                                    
                                                    
                                                        
                                                        Series:ControlLogix
Module Type:Diagnostic DC Output Module
Outputs:16-Point Diagnostic
Voltage:24 Volts DC Source
Operating Voltage Range:19.2-30 Volts DC
Maximum Output Current Rating-Point:2 Amps at
Power Dissipation (Max):3.3 Watts at 60 Celsius
                                                    
                                                
ControlLogix Processor Module
                                                    
                                                    
                                                        
                                                        Series:ControlLogix
Module Type:Processor Module
I-O Memory:0.98 MB
User Memory:8 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
                                                    
                                                
GuardLogix Controller
                                                    
                                                    
                                                        
                                                        Series:ControlLogix
Module Type:GuardLogix Controller
I-O Memory:0.98 MB
User Memory:8 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
                                                    
                                                
ControlLogix Processor Module
                                                    
                                                    
                                                        
                                                        Series:ControlLogix
Module Type:Processor Module
I-O Memory:0.98 MB
User Memory:4 MB
Maximum I-O:128,000
Maximum Analog I-O:4,000
Maximum Digital I-O:128,000
Current Draw (1.2 Volts DC):5 Miliamperes
Current Draw (5.1 Volts DC):800 milliamps
Power Dissipation:2.5 Watts
Thermal Dissipation:8.5 BTU per hour
Isolation Voltage:30 Volts Continuous
                                                    
                                                
ControlLogix Analog module
                                                    
                                                    
                                                        
                                                        Series:ControlLogix
Part Number:1756-IT16
Application:Enhanced I/O for advanced control
Module type:Analog input, thermocouple mode
Number of channels:16, non-isolated
Data resolution:24-bit
Enclosure type:None (Open-style)
Mounting:Chassis
                                                    
                                                
PowerFlex 753 AC Drive
                                                    
                                                    
                                                        
                                                        AC DRIVE
AIR COOLED
POWERFLEX 753
AC INPUT WITH PRECHARGE
IP54
NEMA TYPE 12
690 VAC / 932 VDC
200 KW / 268 HP
212 AMP
FILTERING
JUMPER INSTALLED
NO INTERNAL TRANSISTOR
                                                    
                                                
PowerFlex 753 AC Drive
                                                    
                                                    
                                                        
                                                        AC DRIVE
AIR COOLED
POWERFLEX 753
AC INPUT WITH PRECHARGE
IP54
NEMA TYPE 12
600 VAC / 810 VDC
185 KW / 250 HP
242 AMP
FILTERING
JUMPER REMOVED
NO INTERNAL TRANSISTOR
NO HIM
                                                    
                                                
PowerFlex 753 AC Drive
                                                    
                                                    
                                                        
                                                        Bulletin Number:PowerFlex 753 AC Drive
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:456 Amps, 250kW ND, 200kW HD
Enclosure Type:Type 12 / IP54
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
                                                    
                                                
PowerFlex 753 AC Drive
                                                    
                                                    
                                                        
                                                        Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:302 Amps, 160kW ND, 132kW HD
Enclosure Type:Type 12 / IP54
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:None
                                                    
                                                
PowerFlex 753 AC Drive
                                                    
                                                    
                                                        
                                                        Series:PowerFlex 753
Frames:6...8
Enclosure Type:AC Input w/ Precharge
no DC Terminals
Frames:2	2...7
Enclosure Type 2:IP54, NEMA/UL Type 12
Voltage:400V AC / 540V DC
Filtering:Yes
Default CM Cap Connection:Jumper Installed
                                                    
                                                
PowerFlex 753 AC Drive
                                                    
                                                    
                                                        
                                                        Bulletin Number:PowerFlex 753 AC Drive
with Embedded I/O
Corrosive Gas Protection and Cooling Type:
Standard Protection, Forced Air
Voltage Class:400 VAC, 3 PH
Output Current:260 Amps, 132kW ND, 110kW HD
Enclosure Type:Type 12 / IP54
Input Type:AC Input with Precharge, no DC Terminals
Frame Size:Frame 7
EMC Filtering Options:Filtered
CM jumper installed (preferred)
Dynamic Braking:DB Transistor
                                                    
                                                

 
	
		Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.