PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
2080-IF2 Two-channel analog input plug-in module
Allen-Bradley 2080-IF2 is a two-channel analog input plug-in module for compatible Micro800 programmable controllers. It extends a controller with unipolar voltage or current inputs for process measurements in small-machine and standalone automation applications.
The non-isolated plug-in uses a twelve-pin terminal block and accepts 0 to 10 V DC or 0 to 20 mA signals. Input conversion provides up to 12-bit resolution, with channel configuration available through software or the user program. The documented update time is 180 ms per enabled channel, and the module draws less than 60 mA from its 3.3 V controller supply.
The non-isolated plug-in uses a twelve-pin terminal block and accepts 0 to 10 V DC or 0 to 20 mA signals. Input conversion provides up to 12-bit resolution, with channel configuration available through software or the user program. The documented update time is 180 ms per enabled channel, and the module draws less than 60 mA from its 3.3 V controller supply.
BEFORE YOU BUY
Confirm the complete two-channel analog input plug-in module
ACTUAL APPLICATIONS
Application context for 2080-IF2
2080-IF2 is a two-channel analog input plug-in module in the Micro800 plug-in modules range. Compatible configurations serve food & beverage, water & wastewater, material handling. Suitability depends on the documented supply, connected loads and controller or machine configuration.
-
01 · FOOD & BEVERAGE
Food and Beverage Production and Packaging
Beverage Filling and PackagingFood Processing and Packing -
02 · WATER & WASTEWATER
Water Supply and Wastewater Treatment Processing
Municipal Water SupplyIndustrial Wastewater Treatment -
03 · MATERIAL HANDLING
Industrial Material Handling and Distribution Logistics
Warehouse Material HandlingManufacturing Product Transfer
Technical specifications for 2080-IF2
-
Product Model2080-IF2
-
Product ParametersTwo-channel analog input plug-in module
-
In stock9 units
-
ManufacturerAllen-Bradley
-
Input channels2
-
Voltage input range0–10 V DC
-
Current input range0–20 mA
-
Voltage input impedance>100 kΩ
-
Current input impedance250 Ω
-
Conversion resolution12 bits maximum
-
Data range0–65535
-
Overall accuracy±1% full scale at 25 ℃
-
Nonlinearity±0.1% full scale
-
Repeatability±0.1%
-
Channel update time180 ms per enabled channel
-
Supply current<60 mA at 3.3 V
-
Maximum cable length10 m
-
Operating temperature−20 to +65 ℃
-
Terminal screw torque0.22–0.25 N·m
View all additional
Alternative Names
2080-IF2
Micro800 plug-in modules Two-channel analog input plug-in module
Two-channel analog input plug-in module 2080-IF2
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 2080-IF2 two-channel analog input plug-in module
Allen-Bradley 2080-IF2 is a two-channel analog input plug-in module for compatible Micro800 programmable controllers. It extends a controller with unipolar voltage or current inputs for process measurements in small-machine and standalone automation applications.
Match 2080-IF2 to the installed Micro800 plug-in modules configuration. Compare the supply, electrical interfaces, connectors and companion equipment with the applicable drawing before reconnecting the article.
Preserve the approved configuration and complete the documented checks for the connected two-channel analog input plug-in module. Record the verified connections and final operating results with the equipment record.
Features:
- Input channels: 2
- Voltage input range: 0–10 V DC
- Current input range: 0–20 mA
The 2080-IF2 two-channel analog input plug-in module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 2080-IF2 two-channel analog input plug-in module
Verify the complete 2080-IF2 identity and its two-channel analog input plug-in module role before exchange. Match the installed revision, electrical interfaces and companion hardware; a similar housing does not establish interchangeability.
Record the wiring, grounding, connector allocation and configuration associated with 2080-IF2. Isolate the affected equipment according to its applicable instructions before disconnecting the article.
After fitting the verified 2080-IF2, restore the approved connections and configuration. Complete the affected signal, communication or power checks and retain the acceptance results for the supplied article.
Features:
- Input channels: 2
- Voltage input range: 0–10 V DC
- Current input range: 0–20 mA
The 2080-IF2 two-channel analog input plug-in module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 2080-IF2 two-channel analog input plug-in module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size6.20 × 3.15 × 2.00 cm
-
Shipping weight0.02kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 2080-IF2
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which Micro800 interface does 2080-IF2 provide?
Allen-Bradley 2080-IF2 is a two-channel analog input plug-in module for compatible Micro800 programmable controllers. It extends a controller with unipolar voltage or current inputs for process measurements in small-machine and standalone automation applications. -
What electrical connections distinguish 2080-IF2?
The non-isolated plug-in uses a twelve-pin terminal block and accepts 0 to 10 V DC or 0 to 20 mA signals. Input conversion provides up to 12-bit resolution, with channel configuration available through software or the user program. The documented update time is 180 ms per enabled channel, and the module draws less than 60 mA from its 3.3 V controller supply. -
What operating range applies to 2080-IF2?
Voltage input range: 0–10 V DC. Match the exact module and documented wiring before selection. -
Which configuration must be retained for 2080-IF2?
Match 2080-IF2 to the installed Micro800 plug-in modules configuration. Compare the supply, electrical interfaces, connectors and companion equipment with the applicable drawing before reconnecting the article. -
Can 2080-IF2 be exchanged with a different Micro800 plug-in?
The controller compatibility, channel type, electrical range and terminal allocation must match. A plug-in housing alone does not establish interchangeability with 2080-IF2. -
How should 2080-IF2 be functionally verified?
Preserve the approved configuration and complete the documented checks for the connected two-channel analog input plug-in module. Record the verified connections and final operating results with the equipment record. -
Which identification should accompany a 2080-IF2 order?
Provide 2080-IF2, quantity, installed-equipment identification and connector photographs. State whether the request includes companion hardware or only the two-channel analog input plug-in module. -
What should be inspected when 2080-IF2 arrives?
Compare the 2080-IF2 label, connector arrangement and physical condition with the ordered article. Record any discrepancy before fitting it to the Micro800 plug-in modules equipment.
READY TO VERIFY YOUR PART?
Get a 2080-IF2 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
