PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Allen-Bradley
- Allen-Bradley E300
- 193-ESM-IG-30A-E3T
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
193-ESM-IG-30A-E3T Current and ground-fault sensing module
Allen-Bradley 193-ESM-IG-30A-E3T is the 0.5–30 A current and ground-fault sensing module for the modular E300/E200 electronic overload relay. Its line and load terminals support DIN-rail or panel mounting, including the documented E3 terminal-base replacement arrangement.
The sensing module supplies motor-current and ground-fault information to the separate control and communication modules. Terminal-style power circuits are rated to 690 V AC at 45–65 Hz, with a 6 kV impulse rating. The module has IP20 protection and requires the correct companion modules to form a complete functioning overload relay.
The sensing module supplies motor-current and ground-fault information to the separate control and communication modules. Terminal-style power circuits are rated to 690 V AC at 45–65 Hz, with a 6 kV impulse rating. The module has IP20 protection and requires the correct companion modules to form a complete functioning overload relay.
BEFORE YOU BUY
Confirm the complete current and ground-fault sensing module
ACTUAL APPLICATIONS
Application context for 193-ESM-IG-30A-E3T
193-ESM-IG-30A-E3T is used in the following application areas within compatible E300/E200 electronic overload relay configurations.
-
01 · MANUFACTURING
Discrete Manufacturing and Continuous Industrial Production
Automotive Electronics ManufacturingSpecialty Paper Manufacturing -
02 · WATER & WASTEWATER
Municipal Water Supply and Industrial Wastewater Treatment
Drinking Water TreatmentWastewater Resource Recovery -
03 · CHEMICAL & PETROCHEMICAL
Basic Chemicals and Specialty Chemical Manufacturing
Petrochemical ManufacturingFine Chemical Manufacturing
Technical specifications for 193-ESM-IG-30A-E3T
-
Product Model193-ESM-IG-30A-E3T
-
Product ParametersCurrent and ground-fault sensing module
-
In stock1 unit
-
ManufacturerAllen-Bradley
-
Current measuring range0.5 to 30 A
-
Sensing functionsMotor current and ground fault
-
Power-circuit terminals1/L1, 3/L2, 5/L3, 2/T1, 4/T2, 6/T3
-
Rated power-circuit voltage690 V AC
-
Rated impulse withstand6 kV
-
Rated line frequency45 to 65 Hz
-
Mounting arrangementDIN rail or panel; line/load power terminals
-
Legacy sensing-base replacement193-ECPM series; exact selection table applies
-
Operating ambient, open-20 to +55 °C
-
Operating ambient, enclosed-20 to +40 °C
-
Storage ambient-40 to +85 °C
-
Operating relative humidity5 to 95%, non-condensing
-
Protection ratingIP20
-
Maximum installation altitude2000 m
-
Mechanical shock30 g
View all additional
Alternative Names
193-ESM-IG-30A-E3T
E300 30 A current/ground-fault sensing module
E200 E3-terminal sensing module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 193-ESM-IG-30A-E3T current and ground-fault sensing module
Assemble the sensing, control and communication modules as a matched E300/E200 relay. The IG sensing selection includes current and ground-fault measurement; it does not make this item a voltage-sensing module or a standalone network relay. Network selection belongs to the communication module.
Route the three motor phases through the numbered line/load power terminals and check the full-load-current setting against the 0.5–30 A sensing range. The E3T terminal-base arrangement has a specific legacy replacement role, distinct from the standard -T and pass-through -P constructions.
The sensing module supplies motor-current and ground-fault information to the separate control and communication modules. Terminal-style power circuits are rated to 690 V AC at 45–65 Hz, with a 6 kV impulse rating. The module has IP20 protection and requires the correct companion modules to form a complete functioning overload relay.
Features:
- 0.5–30 A current and ground-fault measurement
- E3T line/load terminal mounting
- Separate control and communication modules
The 193-ESM-IG-30A-E3T current and ground-fault sensing module requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 193-ESM-IG-30A-E3T current and ground-fault sensing module
Compare the E3T suffix, sensing range and terminal arrangement with the removed module. Inspect phase order, terminal tightening and available enclosure space before connecting the retained control and communication modules.
After reassembly, check current values, ground-fault configuration and the relay reset behavior under the actual control configuration. The open-air operating limit is +55 °C, while the enclosed limit is +40 °C; enclosure heat must be considered independently of the room temperature.
No. Check measured motor currents, ground-fault settings and the completed overload assembly as well as any network communication.
Features:
- Verify E3T rather than -T or -P suffix
- Check motor-current and fault settings
- Apply open/enclosed temperature limits
The 193-ESM-IG-30A-E3T current and ground-fault sensing module requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 193-ESM-IG-30A-E3T current and ground-fault sensing module must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size15.1 x 4.4 x 5.4 cm
-
Shipping weight0.28 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8536490090
-
OriginMexico
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 193-ESM-IG-30A-E3T
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does the IG sensing option measure motor voltage?
IG denotes current and ground-fault sensing. Voltage sensing is a different selection in the E300/E200 range. -
Is 193-ESM-IG-30A-E3T a complete Ethernet overload relay?
No. It is the sensing portion; separate control and communication modules complete the relay and determine its network interface. -
What distinguishes the E3T ending from the pass-through version?
E3T provides line/load power terminals with the documented legacy terminal-base replacement arrangement; the pass-through version uses a -P ending. -
Can it monitor a motor with a 0.7 A full-load setting?
The specified sensing range starts at 0.5 A, so 0.7 A is within the module range; the complete protection settings must still suit the motor. -
Which temperature limit applies inside an enclosure?
The documented enclosed operating range is -20 to +40 °C, compared with -20 to +55 °C for open installation. -
Should a replacement module be tested only for network communication?
No. Check measured motor currents, ground-fault settings and the completed overload assembly as well as any network communication. -
Which components should be identified in an E3T spares inquiry?
Provide the sensing-module code plus the retained control and communication module codes and the existing terminal arrangement. -
Can the sensing module be quoted separately from a full E300 assembly?
Yes. Request the sensing module alone or list the required companion modules so the quotation defines the exact scope.
READY TO VERIFY YOUR PART?
Get a 193-ESM-IG-30A-E3T quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
193-ESM-IG-30A-E3TCurrent and ground-fault sensing moduleManufacturer: Allen-BradleyView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
