PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
2711P-K10C4D1 PanelView Plus operator terminal
Allen-Bradley 2711P-K10C4D1 is a PanelView Plus operator terminal in the PanelView Plus 1000 terminals. It is used to provide the documented electrical or communication connection between compatible components.
Its documented configuration includes display size of 10.4 in, display type of Color TFT LCD, resolution of 640 x 480 pixels, and color depth of 18-bit color. During operation, the PanelView Plus operator terminal presents operating information and transfers approved operator commands to the controller.
Its documented configuration includes display size of 10.4 in, display type of Color TFT LCD, resolution of 640 x 480 pixels, and color depth of 18-bit color. During operation, the PanelView Plus operator terminal presents operating information and transfers approved operator commands to the controller.
BEFORE YOU BUY
Confirm the complete PanelView Plus operator terminal
ACTUAL APPLICATIONS
Where 2711P-K10C4D1 Fits Across Major Industry Sectors
Uses span water, chemicals and printing, subject to verified compatibility, operating conditions and project requirements.
-
01 · WATER & WASTEWATER
Municipal Freshwater Production and Commercial Wastewater Treatment Operations
Freshwater treatment and production for drinking and irrigation supply.Wastewater collection and treatment for municipal and industrial services. -
02 · CHEMICAL PROCESSING
Batch Chemical Formulation and Continuous Industrial Chemical Production
Batch chemical formulation and blending for industrial product manufacturing.Continuous chemical production and processing for commercial material supply. -
03 · PRINTING & PACKAGING
Commercial Printing and Industrial Product Packaging Production
Commercial printing and production of printed materials for businesses.Industrial product packaging and converting for commercial consumer markets.
Technical specifications for 2711P-K10C4D1
-
Product Model2711P-K10C4D1
-
Product ParametersPanelView Plus operator terminal
-
Place of shipmentXiamen, China
-
In stock1 unit
-
ManufacturerAllen-Bradley
-
Display Size10.4 in
-
Display TypeColor TFT LCD
-
Resolution640 x 480 pixels
-
Color Depth18-bit color
-
Operator InputKeypad
-
Input Voltage24 V DC
-
Ethernet Interface10/100 Mbit/s EtherNet/IP
-
Serial InterfaceRS-232
-
Application Flash64 MB
-
USB FunctionUSB printing support
View all additional
Alternative Names
2711P K10C4D1
PanelView Plus 1000 PanelView Plus operator terminal
Allen-Bradley PanelView Plus operator terminal
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 2711P-K10C4D1 to the installed PanelView Plus 1000 terminals
Allen-Bradley 2711P-K10C4D1 is a PanelView Plus operator terminal used in the PanelView Plus 1000 terminals. Use 2711P-K10C4D1 for the approved PanelView Plus 1000 application screens, status indications and navigation. Restore the correct FactoryTalk View ME project and communication settings.
Verify every function, numeric and navigation key assigned to 2711P-K10C4D1. Confirm alarms, acknowledgements and commands reach the intended controller tags without unintended equipment movement. Confirm operator input (Keypad), input voltage (24 V DC), the exact mechanical position and approved system configuration before connection.
After installing 2711P-K10C4D1, test display quality, keypad response, EtherNet/IP or serial communication, user access and the affected machine sequence before production use. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 2711P-K10C4D1
- Product class: PanelView Plus operator terminal
- Family: PanelView Plus 1000 terminals
The Allen-Bradley 2711P-K10C4D1 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 2711P-K10C4D1 identity before exchange
Replace 2711P-K10C4D1 only after matching the full article identity, PanelView Plus operator terminal, resolution (640 x 480 pixels) and documented system role. Confirm that the installed hardware version and controlled configuration agree with the manufacturer record.
Before removal, photograph the product label, mounting position, serial interface (RS-232), cable routing, shields, earth connections and adjacent assemblies. Preserve the approved program, parameter set or network configuration needed for recovery.
After installation, verify application flash (64 MB) and usb function (USB printing support). Review diagnostics, test the affected function at a safe operating point and record the final maintenance acceptance evidence.
Features:
- Exact identity: 2711P-K10C4D1
- Serial Interface: RS-232
- USB Function: USB printing support
The Allen-Bradley 2711P-K10C4D1 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 2711P-K10C4D1
- Installation checks matched to PanelView Plus 1000 terminals
- Exact Allen-Bradley identity required before service
Documentation for Allen-Bradley 2711P-K10C4D1 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size45 × 32 × 15 cm
-
Shipping weight4.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 2711P-K10C4D1
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is 2711P-K10C4D1 a complete terminal or a replaceable PanelView component?
2711P-K10C4D1 is a complete PanelView Plus 1000 keypad terminal with its operator display and control electronics. -
Which display specifications should engineering verify for 2711P-K10C4D1?
Confirm the 10.4-inch color TFT display, 640 x 480 resolution, keypad operator input and the complete 2711P-K10C4D1 nameplate. -
What system details should a distributor quote include for 2711P-K10C4D1?
Provide 2711P-K10C4D1, quantity, series and hardware revision, installed PanelView Plus generation, nameplate photographs, destination and required documentation. -
Which communication interfaces apply when replacing 2711P-K10C4D1?
The official description identifies EtherNet/IP and RS-232. Preserve the configured IP address, serial settings and controller shortcuts. -
Can a similar 10.4-inch PanelView unit directly replace 2711P-K10C4D1?
Appearance and screen size are insufficient. Match the full 2711P-K10C4D1 catalog number, power type, display/input style, communication options and project compatibility. -
What should maintenance record before removing 2711P-K10C4D1?
Photograph the label, rear connectors, mounting clips, cable destinations and protective earth, then back up the HMI application and communication configuration. -
What receiving inspection is required for 2711P-K10C4D1?
Check the exact catalog label, keypad and display surface, housing, rear connectors, seals and mounting hardware for damage or contamination. -
How should 2711P-K10C4D1 be commissioned after installation?
Verify supply and grounding, restore the approved application, confirm controller communications, test display and keypad operation, and record alarm and command results.
READY TO VERIFY YOUR PART?
Get a 2711P-K10C4D1 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
2711P-K10C4D1PanelView Plus operator terminalManufacturer: Allen-BradleyView Details
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
