PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
2711P-K10C4D8 keypad operator terminal
Allen Bradley 2711P-K10C4D8 is a keypad operator terminal in the PanelView Plus 6 operator interface systems. It is used to provide the documented electrical or communication connection between compatible components.
Its documented configuration includes display size of 10.4 in, display type of Color graphics, display resolution of 640 × 480 pixels, and operator input of Keypad. During operation, the keypad operator terminal performs its assigned keypad operator terminal function through the documented power, signal and communication interfaces.
Its documented configuration includes display size of 10.4 in, display type of Color graphics, display resolution of 640 × 480 pixels, and operator input of Keypad. During operation, the keypad operator terminal performs its assigned keypad operator terminal function through the documented power, signal and communication interfaces.
BEFORE YOU BUY
Confirm the complete keypad operator terminal
ACTUAL APPLICATIONS
Where 2711P-K10C4D8 Fits Across Major Industry Sectors
Uses span water, paper and mining, subject to verified compatibility, operating conditions and project requirements.
-
01 · WATER & WASTEWATER
Municipal Wastewater Treatment, Water Recycling and Resource Recovery
Municipal sewage treatment for public sanitation and environmental protection.Treated water recycling and organic material recovery from wastewater. -
02 · PULP & PAPER
Tissue Paper Production, Paper Converting and Consumer Products
Tissue paper production for household hygiene and consumer markets.Paper converting and finishing for manufactured consumer tissue products. -
03 · MINING & MINERALS
Coal Production, Mineral Extraction and Bulk Material Processing
Underground coal extraction and processing for industrial fuel production.Mineral stockpiling and material preparation within mining supply chains.
Technical specifications for 2711P-K10C4D8
-
Product Model2711P-K10C4D8
-
Product Parameterskeypad operator terminal
-
In stock1 unit
-
ManufacturerAllen-Bradley
-
Display Size10.4 in.
-
Display TypeColor graphics
-
Display Resolution640 × 480 pixels
-
Operator InputKeypad
-
Power InputDC
-
Input Voltage Range18 to 32 V DC
-
RAM512 MB volatile memory
-
Nonvolatile Memory512 MB flash memory
-
Free User MemoryApproximately 79 MB
-
Operating SystemWindows CE 6.0
-
Ethernet InterfaceIntegrated Ethernet port
-
Serial InterfaceIntegrated RS-232 port
-
USB Host Ports2
-
Runtime SoftwareFactoryTalk View Machine Edition 6.0 or later
-
ViewPoint SoftwareFactoryTalk ViewPoint 1.2 or later
View all additional
Alternative Names
2711P K10C4D8
Allen Bradley keypad operator terminal
PanelView Plus 6 operator interface systems keypad operator terminal
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 2711P-K10C4D8 to the installed PanelView Plus 6 operator interface systems
Allen Bradley 2711P-K10C4D8 is a keypad operator terminal for the PanelView Plus 6 operator interface systems. Its exact article suffix determines the supported interface, signal or communication function and the approved companion equipment.
Engineering should compare integrated ports (Ethernet, RS-232, 2 USB host), input voltage range (18-30VDC) and input type (Keypad) with the installed system design. Confirm connector keying, addressing and configuration-tool support before connection.
Use the manufacturer documentation for the complete wiring and configuration sequence. Validate communication, signal conversion or control response with the connected equipment, then archive measured results and the final configuration with the asset record.
Features:
- Exact identity: 2711P-K10C4D8
- Product class: keypad operator terminal
- Family: PanelView Plus 6 operator interface systems
The Allen Bradley 2711P-K10C4D8 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 2711P-K10C4D8 identity before exchange
Replace 2711P-K10C4D8 only after matching the complete article code, keypad operator terminal, installed PanelView Plus 6 operator interface systems role and documented hardware or firmware revision. Similar housings and related family numbers do not establish functional interchangeability.
Photograph the nameplate, keyed connectors, terminal numbering, cable routing, shields, earth points and adjacent modules. Export the applicable controller, HMI, drive or network configuration and record addresses, parameters and diagnostic messages before removal.
After fitting the verified article, restore the controlled configuration and check every affected signal or communication path. Review status indications and diagnostic buffers, run the documented functional test at a safe operating point and retain the final acceptance record.
Features:
- Exact identity: 2711P-K10C4D8
- Product class: keypad operator terminal
- Family check: PanelView Plus 6 operator interface systems
The Allen Bradley 2711P-K10C4D8 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical data prepared for 2711P-K10C4D8
- Product family: PanelView Plus 6 operator interface systems
- Exact Allen Bradley identity required before service
Documentation for Allen Bradley 2711P-K10C4D8 must match the installed equipment and complete product identity; confirm document applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size39.8 × 24.6 × 7.5 cm
-
Shipping weight2.55 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371098
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 2711P-K10C4D8
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which configuration data should be backed up before exchanging 2711P-K10C4D8?
Retain the applicable PLC, HMI, drive, network or device configuration and record firmware, addresses, parameters and diagnostic messages. -
How should technicians commission 2711P-K10C4D8 after installation?
Confirm the documented supply and wiring, restore the controlled configuration, inspect diagnostics and test the affected keypad operator terminal function at a safe operating point. -
What service evidence should be retained after work on 2711P-K10C4D8?
Keep the receiving inspection, original connection record, configuration backup, measurements, diagnostic results and final acceptance record for 2711P-K10C4D8. -
Which nameplate details identify the correct 2711P-K10C4D8 for a distributor quotation?
Quote 2711P-K10C4D8 with the complete suffix, keypad operator terminal, PanelView Plus 6 operator interface systems, quantity and clear nameplate photographs. -
What should engineering compare before integrating 2711P-K10C4D8 into the installed system?
Compare the documented PanelView Plus 6 operator interface systems role, supply class, communication or signal interface, firmware or hardware revision and companion equipment. -
Which incoming-inspection checks apply to 2711P-K10C4D8?
Inspect the 2711P-K10C4D8 label, connector keying, housing or circuit board condition, seals, terminals and signs of transport damage. -
Can another article in the same PanelView Plus 6 operator interface systems family directly replace 2711P-K10C4D8?
Do not assume interchangeability. Match the full article code, technical ratings, interface count, protocol, configuration and installed mechanical arrangement. -
Which connection records should maintenance capture before removing 2711P-K10C4D8?
Photograph each connector, cable label, shield, earth conductor, network path and adjacent module before disconnecting 2711P-K10C4D8.
READY TO VERIFY YOUR PART?
Get a 2711P-K10C4D8 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
