PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
Customs & Documentation
HS classification and country of origin are stated as commercial references and confirmed on the written quotation and shipping documents.
- Payment
Payment
Payment is accepted by bank transfer (T/T) in the currencies confirmed in the written quotation.
- Product Condition
Product Condition
Product identity, label, visible condition and packing are checked against the written order before dispatch.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
2711P-RDK10C PanelView Plus display module
Allen-Bradley 2711P-RDK10C is a replaceable PanelView Plus 1000 keypad display module with a 10.4-inch color active-matrix TFT LCD and 640 x 480 resolution. Confirm the complete article identity, installed configuration and manufacturer documentation before ordering or replacement.
BEFORE YOU BUY
Confirm the complete PanelView Plus display module
ACTUAL APPLICATIONS
Application context for 2711P-K10C4D1,2711P-RDK10C
Manufacturer documentation places the Allen-Bradley 2711P-RDK10C Panelview Plus Display Module in practical generic applications. The three cases below describe different operating tasks in which 2711P-K10C4D1,2711P-RDK10C performs its documented product-family role with the configured companion equipment.
- 01 · AUTOMOTIVE
Support powertrain assembly with Allen Bradley
For the coordinated operation of the machining cells and pallet systems, 2711P-K10C4D1,2711P-RDK10C operates in its approved product-family role as a Allen-Bradley 2711P-RDK10C Panelview Plus Display Module. During quality-hold release, the system uses this function to hand off part identity with the machine sequence, helping it retain traceability at the next operation. - 02 · MACHINERY MANUFACTURING
Manage machine-tool automation during cycle start
At the control layer of the spindles, axes and tool changers, 2711P-K10C4D1,2711P-RDK10C supports the configured automation role as a Allen-Bradley 2711P-RDK10C Panelview Plus Display Module. During cycle start, the system uses this function to coordinate the equipment states required by the active cycle, helping it complete the machining step with traceable status. - 03 · WATER & WASTEWATER
Synchronize chemical dosing during dose-setpoint correction
For the coordinated operation of the metering pumps and contact tanks, 2711P-K10C4D1,2711P-RDK10C performs its assigned control role as a Allen-Bradley 2711P-RDK10C Panelview Plus Display Module. During dose-setpoint correction, the system uses this function to match reagent flow to the measured process load, helping it keep treatment chemistry inside its operating target.
Technical specifications for 2711P-RDK10C
-
Product Model2711P-RDK10C
-
Product ParametersPanelView Plus display module
-
In stock1 unit
-
ManufacturerAllen-Bradley
-
Display Size10.4 in
-
Display TypeColor active-matrix TFT LCD
-
Resolution640 x 480 pixels
-
Luminance300 cd/m2
-
Operator InputKeypad
-
Backlight Life50,000 h minimum
-
Application Flash20 MB
-
External CompactFlash512 MB maximum
-
LED IndicatorsCOMM green / Fault red
-
Keypad Actuation1 million presses
View all additional
Alternative Names
2711P RDK10C
PanelView Plus 1000 PanelView Plus display module
Allen-Bradley PanelView Plus display module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 2711P-RDK10C to the installed PanelView Plus 1000 terminals
Allen-Bradley 2711P-RDK10C is a PanelView Plus display module used in the PanelView Plus 1000 terminals. Use 2711P-RDK10C for the approved PanelView Plus 1000 application screens, status indications and navigation. Restore the correct FactoryTalk View ME project and communication settings.
Verify every function, numeric and navigation key assigned to 2711P-RDK10C. Confirm alarms, acknowledgements and commands reach the intended controller tags without unintended equipment movement. Confirm operator input (Keypad), backlight life (50,000 h minimum), the exact mechanical position and approved system configuration before connection.
After installing 2711P-RDK10C, test display quality, keypad response, EtherNet/IP or serial communication, user access and the affected machine sequence before production use. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 2711P-RDK10C
- Product class: PanelView Plus display module
- Family: PanelView Plus 1000 terminals
The Allen-Bradley 2711P-RDK10C requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 2711P-RDK10C identity before exchange
Replace 2711P-RDK10C only after matching the full article identity, PanelView Plus display module, resolution (640 x 480 pixels) and documented system role. Confirm that the installed hardware version and controlled configuration agree with the manufacturer record.
Before removal, photograph the product label, mounting position, external compactflash (512 MB maximum), cable routing, shields, earth connections and adjacent assemblies. Preserve the approved program, parameter set or network configuration needed for recovery.
After installation, verify led indicators (COMM green / Fault red) and keypad actuation (1 million presses). Review diagnostics, test the affected function at a safe operating point and record the final maintenance acceptance evidence.
Features:
- Exact identity: 2711P-RDK10C
- External CompactFlash: 512 MB maximum
- Keypad Actuation: 1 million presses
The Allen-Bradley 2711P-RDK10C requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 2711P-RDK10C
- Installation checks matched to PanelView Plus 1000 terminals
- Exact Allen-Bradley identity required before service
Documentation for Allen-Bradley 2711P-RDK10C must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size45 × 32 × 12 cm
-
Shipping weight3.4 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference85371091
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 2711P-RDK10C
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Is 2711P-RDK10C a complete terminal or a replaceable PanelView component?
2711P-RDK10C is the replaceable 1000 keypad color display module; confirm the mating logic and communication module before ordering. -
Which display specifications should engineering verify for 2711P-RDK10C?
Confirm the 10.4-inch color TFT display, 640 x 480 resolution, keypad operator input and the complete 2711P-RDK10C nameplate. -
What system details should a distributor quote include for 2711P-RDK10C?
Provide 2711P-RDK10C, quantity, series and hardware revision, installed PanelView Plus generation, nameplate photographs, destination and required documentation. -
Which communication interfaces apply when replacing 2711P-RDK10C?
The display module mates with the installed PanelView Plus logic/communication module; record that module and every existing port before removal. -
Can a similar 10.4-inch PanelView unit directly replace 2711P-RDK10C?
Appearance and screen size are insufficient. Match the full 2711P-RDK10C catalog number, power type, display/input style, communication options and project compatibility. -
What should maintenance record before removing 2711P-RDK10C?
Photograph the label, rear connectors, mounting clips, cable destinations and protective earth, then back up the HMI application and communication configuration. -
What receiving inspection is required for 2711P-RDK10C?
Check the exact catalog label, keypad and display surface, housing, rear connectors, seals and mounting hardware for damage or contamination. -
How should 2711P-RDK10C be commissioned after installation?
Verify supply and grounding, restore the approved application, confirm controller communications, test display and keypad operation, and record alarm and command results.
READY TO VERIFY YOUR PART?
Get a 2711P-RDK10C quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
