PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 177230 Seismic Transmitter
- 177230-02-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Loop powered seismic transmitter
Bently Nevada 177230-02-02-05 is a loop-powered seismic transmitter. The loop-powered seismic transmitter sends a velocity-related current signal to a compatible control-system input. It also provides an unbuffered acceleration signal for analysis. The chosen frequency and detection option determines how the vibration level is represented by the main output.
Match the complete measurement-range, frequency and approval selections before configuring the receiving channel. The order specifies the installed measurement behavior; no field adjustment is required by the transmitter. Unresolved suffixes must not be assigned a certification or alternate range.
Match the complete measurement-range, frequency and approval selections before configuring the receiving channel. The order specifies the installed measurement behavior; no field adjustment is required by the transmitter. Unresolved suffixes must not be assigned a certification or alternate range.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 177230-02-02-05 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · METALS & MINING
Steel Production and Metallurgical Plant Utility Equipment
Rolling mills and extraction fans in steel production plants.Coke oven compressors and combustion blowers serving steel plants. -
02 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities. -
03 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants.
Technical specifications for 177230-02-02-05
-
Product Model177230-02-02-05
-
Product ParametersLoop powered seismic transmitter
-
In stock8 units
-
ManufacturerBently Nevada
-
Selected velocity range0 to 50.8 mm/s
-
Frequency and detection option3 Hz to 1 kHz, peak
-
Approval selectionMultiple approvals option; verify delivered certificate
-
Velocity output4-20 mA loop, pin A to pin B
-
Excitation voltage12 to 30 Vdc, current limited to 40 mA
-
Settling timeLess than 15 seconds within 2% of final value
-
Dynamic outputUnbuffered acceleration voltage, pin C relative to B
-
Dynamic sensitivity100 mV/g, +/-20%
-
Dynamic acceleration range15 g peak
-
Dynamic frequency response2.5 Hz to 10 kHz, +/-10%
-
Dynamic signal bias2.5 +/-0.1 V relative to pin B
-
Operating temperature-40 to +85 deg C
-
Case material316L stainless steel
-
Mounting interface1/4-28 UNF hole
-
Mounting torque4 to 7 N m
View all additional
Alternative Names
177230-02-02-05 loop-powered seismic transmitter
Bently Nevada 177230-02-02-05
177230 02 02 05 loop-powered seismic transmitter
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
LOOP POWERED SEISMIC TRANSMITTER
Integrating 177230-02-02-05
The loop-powered seismic transmitter sends a velocity-related current signal to a compatible control-system input. It also provides an unbuffered acceleration signal for analysis. The chosen frequency and detection option determines how the vibration level is represented by the main output.
The manufacturer identifies PLC, DCS and SCADA inputs with suitable current-limited supplies. Match the 4-20 mA scaling to the selected velocity range and RMS or peak option. Keep the dynamic signal reference isolated from grounding to avoid shorting the loop.
Mount using the documented stud interface and 4-7 N m torque. If a magnetic base is used, roll it onto the machine instead of snapping it into place; the resulting shock can damage electronics. Follow the pin assignments and applicable approval drawing.
Features:
- Match complete ordering options, sensing-chain configuration, mounting and target arrangement
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 177230-02-02-05 loop-powered seismic transmitter requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 177230-02-02-05 requires comparing complete ordering options, sensing-chain configuration, mounting and target arrangement. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The manufacturer identifies PLC, DCS and SCADA inputs with suitable current-limited supplies. Match the 4-20 mA scaling to the selected velocity range and RMS or peak option. Keep the dynamic signal reference isolated from grounding to avoid shorting the loop.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 177230-02-02-05 loop-powered seismic transmitter requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 177230-02-02-05 loop-powered seismic transmitter must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.5x22.5x3.5cm
-
Shipping weight0.38 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 177230-02-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What type of product is 177230-02-02-05?
177230-02-02-05 is a loop-powered seismic transmitter. Match the complete measurement-range, frequency and approval selections before configuring the receiving channel. The order specifies the installed measurement behavior; no field adjustment is required by the transmitter. Unresolved suffixes must not be assigned a certification or alternate range. -
What does this device measure?
The loop-powered seismic transmitter sends a velocity-related current signal to a compatible control-system input. It also provides an unbuffered acceleration signal for analysis. The chosen frequency and detection option determines how the vibration level is represented by the main output. -
What must be checked for system compatibility?
The manufacturer identifies PLC, DCS and SCADA inputs with suitable current-limited supplies. Match the 4-20 mA scaling to the selected velocity range and RMS or peak option. Keep the dynamic signal reference isolated from grounding to avoid shorting the loop. -
Which monitoring application is documented?
The transmitter provides a loop-powered vibration signal to a compatible PLC input. Configure that input for the exact range and detection option. -
What installation precautions apply?
Mount using the documented stud interface and 4-7 N m torque. If a magnetic base is used, roll it onto the machine instead of snapping it into place; the resulting shock can damage electronics. Follow the pin assignments and applicable approval drawing. -
Are the two frequency options both RMS?
No. Option 01 is 10 Hz-1 kHz with RMS detection; option 02 is 3 Hz-1 kHz with peak detection. Match the control-system interpretation to the exact option. -
Can dynamic output pin B be grounded?
No. Pin B is the loop return and dynamic reference. The manufacturer warns that grounding it shorts the 4-20 mA loop and results in no output.
READY TO VERIFY YOUR PART?
Get a 177230-02-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
