PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 1900/27-03
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Single channel vibration monitor
Bently Nevada 1900/27-03 is a single-channel vibration monitor. The monitor converts a compatible accelerometer signal into peak vibration velocity. It provides local indication, relay annunciation and a current-loop output for trending. It operates as a single-channel, locally mounted device; its usefulness depends on the machine and transducer mounting.
The zero-three power option identifies the nominal twenty-four-volt DC version, with an eighteen-to-thirty-six-volt operating input range. It is not the AC/high-DC version. Check the selected supply, transducer connection and alarm configuration before replacing a unit or putting the channel into service.
The zero-three power option identifies the nominal twenty-four-volt DC version, with an eighteen-to-thirty-six-volt operating input range. It is not the AC/high-DC version. Check the selected supply, transducer connection and alarm configuration before replacing a unit or putting the channel into service.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 1900 local vibration monitoring system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · MACHINERY PROTECTION
Monitoring a selected casing-vibration point
The manufacturer describes stand-alone monitoring for general-purpose and some essential machinery. Assess whether rotor vibration reaches the chosen bearing-housing or casing location before relying on that measurement for machine protection. -
02 · PLANT TRENDING
Providing a current-loop vibration signal
The built-in 4-20 mA interface sends the monitored vibration level to plant control or automation systems. It complements local indication and relay annunciation; the receiving system and channel settings remain part of the installation. -
03 · PERIODIC DIAGNOSTICS
Interfacing with Trendmaster 2000
The documented optional Rack Buffered Output TIM connects this monitor to Trendmaster 2000. It allows selected seismic measurement points to combine local monitoring with automated data collection and diagnostics; the optional interface is not an integral network port.
Technical specifications for 1900/27-03
-
Product Model1900/27-03
-
Product ParametersSingle channel vibration monitor
-
In stock10 units
-
ManufacturerBently Nevada
-
Measurement channelsOne
-
Measured quantityVibration velocity, zero-to-peak
-
Compatible accelerometers200150 and 190520
-
Input sensitivity100 mV/g
-
Maximum acceleration input20 g peak
-
Velocity full-scale limit50.8 mm/s below 614 Hz; input-limited above 614 Hz
-
High-pass corner8 Hz at -3 dB
-
Local display refresh0.8 s
-
Recorder interface4-20 mA
-
Buffered output sensitivity19.7 mV per mm/s
-
Buffered output impedance500 ohms
-
Relay contact formSPDT
-
Selectable alarm delays3, 5, 10 or 15 seconds
-
Operating temperature-20 to +70 deg C
-
Selected power input24 Vdc nominal; permitted 18 to 36 Vdc
View all additional
Alternative Names
1900/27 03
1900/27-03 single-channel vibration monitor
Bently Nevada 1900/27-03
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SINGLE CHANNEL VIBRATION MONITOR
Integrating 1900/27-03
The monitor converts a compatible accelerometer signal into peak vibration velocity. It provides local indication, relay annunciation and a current-loop output for trending. It operates as a single-channel, locally mounted device; its usefulness depends on the machine and transducer mounting.
The source specifies 200150 and 190520 accelerometers with a 100 mV/g input. Connection to Trendmaster 2000 requires the optional Rack Buffered Output TIM, identified as 101281-01. This interface arrangement does not establish direct compatibility with an arbitrary sensor, network or current software release.
Check the selected supply, signal wiring and alarm settings using the 190127-01 operation and maintenance manual. Transducer mounting must preserve the expected amplitude and frequency response. The optional 190100-01 enclosure achieves its stated NEMA 4X protection only when properly installed; the bare monitor is not that enclosure.
Features:
- Match complete order, installed input and output configuration, wiring and installation instructions
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 1900/27-03 single-channel vibration monitor requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 1900/27-03 requires comparing complete order, installed input and output configuration, wiring and installation instructions. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
The source specifies 200150 and 190520 accelerometers with a 100 mV/g input. Connection to Trendmaster 2000 requires the optional Rack Buffered Output TIM, identified as 101281-01. This interface arrangement does not establish direct compatibility with an arbitrary sensor, network or current software release.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 1900/27-03 single-channel vibration monitor requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 1900/27-03 single-channel vibration monitor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size19.8cm x 16.2cm x 10.8cm
-
Shipping weight1.35 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 1900/27-03
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
How is 1900/27-03 identified?
The zero-three power option identifies the nominal twenty-four-volt DC version, with an eighteen-to-thirty-six-volt operating input range. It is not the AC/high-DC version. Check the selected supply, transducer connection and alarm configuration before replacing a unit or putting the channel into service. -
What is the function of this component?
The monitor converts a compatible accelerometer signal into peak vibration velocity. It provides local indication, relay annunciation and a current-loop output for trending. It operates as a single-channel, locally mounted device; its usefulness depends on the machine and transducer mounting. -
Which equipment and settings must match?
The source specifies 200150 and 190520 accelerometers with a 100 mV/g input. Connection to Trendmaster 2000 requires the optional Rack Buffered Output TIM, identified as 101281-01. This interface arrangement does not establish direct compatibility with an arbitrary sensor, network or current software release. -
What application does it support?
The manufacturer describes stand-alone monitoring for general-purpose and some essential machinery. Assess whether rotor vibration reaches the chosen bearing-housing or casing location before relying on that measurement for machine protection. -
What should be checked during installation?
Check the selected supply, signal wiring and alarm settings using the 190127-01 operation and maintenance manual. Transducer mounting must preserve the expected amplitude and frequency response. The optional 190100-01 enclosure achieves its stated NEMA 4X protection only when properly installed; the bare monitor is not that enclosure. -
Can this zero-three version be connected to a 230 Vac source?
No. The 03 ordering selection is the nominal 24 Vdc version and the specifications permit 18 to 36 Vdc. The separately ordered 01 version has different AC/high-DC input ratings. -
Why can the recorder output fall to 2 mA in BYPASS?
The monitor has a configurable BYPASS clamp. When enabled, the 4-20 mA output can clamp to 2 mA in BYPASS. Check this setting before interpreting that value as a normal vibration reading. -
Does the 50.8 mm/s range remain available at every frequency?
No. The source specifies that full range below 614 Hz. Above 614 Hz the acceleration/input-voltage limit reduces the available velocity range; evaluate the signal frequency and amplitude together.
READY TO VERIFY YOUR PART?
Get a 1900/27-03 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
