PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 21000, 24701, and 164818 Probe Housing Assemblies
- 21000-34-05-00-015-04-02
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
21000-34-05-00-015-04-02 proximity probe housing assembly
Bently Nevada 21000-34-05-00-015-04-02 proximity probe housing assembly supports Bently Nevada probe housing assemblies.
The assembly combines the documented electrical, signal and mechanical interfaces for its assigned system position. It processes or transfers the defined operating signals through the configured equipment path. The resulting interface supports repeatable control, protection or measurement performance within the approved installation.
The assembly combines the documented electrical, signal and mechanical interfaces for its assigned system position. It processes or transfers the defined operating signals through the configured equipment path. The resulting interface supports repeatable control, protection or measurement performance within the approved installation.
BEFORE YOU BUY
Confirm the complete proximity probe housing assembly
ACTUAL APPLICATIONS
Where 21000-34-05-00-015-04-02 Fits Across Major Industry Sectors
Uses span power, paper and food, subject to verified compatibility, operating conditions and project requirements.
-
01 · POWER GENERATION
Electricity Production Across Thermal and Hydroelectric Power Industries
Thermal electricity generation for regional power and utility markets.Hydroelectric energy production supporting renewable electricity supply and distribution. -
02 · PULP & PAPER
Paper Pulp Manufacturing and Commercial Paper Production
Pulp production and fiber processing for paper manufacturing operations.Paper manufacturing for printing, communication and commercial packaging markets. -
03 · FOOD & BEVERAGE
Beverage Production and Packaged Consumer Food Manufacturing
Beverage production and processing for commercial food supply markets.Packaged food manufacturing for ready-to-eat consumer food product markets.
Technical specifications for 21000-34-05-00-015-04-02
-
Product Model21000-34-05-00-015-04-02
-
Product Parametersproximity probe housing assembly
-
In stock1 unit
-
ManufacturerBently Nevada
-
Probe configuration option34: 3300 XL 8 mm, protector, approval option
-
Probe cable length option05: 0.5 m
-
Standoff adapter option00: No standoff adapter
-
Probe penetration option015: 1.5 in (38.10 mm)
-
Fittings option04: One 3/4-14 NPT plug only
-
Mounting thread option02: 3/4-14 NPT
-
Housing body materialAluminum
-
Sleeve material304 stainless steel
-
Penetration adjustment+/-0.5 in (13 mm)
-
Enclosure classificationCSA Type 4; standard non-CA housing
-
Long-sleeve support thresholdAdditional support above approximately 12 in
-
Probe thermal range-51 to +177 deg C; pressure-seal caution below -34 deg C
View all additional
Alternative Names
21000 34 05 00 015 04 02
Bently Nevada proximity probe housing assembly
Bently Nevada probe housing assemblies proximity probe housing assembly
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM CONFIGURATION
Match the installed measurement arrangement
Bently Nevada 21000-34-05-00-015-04-02 provides an externally mounted housing for a 3300 XL 8 mm reverse-mount proximity probe with connector protection. This configuration uses an aluminum body and a 304 stainless steel sleeve, with a 0.5 m probe lead.
The ordered penetration is 1.5 inches with no standoff adapter and a 3/4-14 NPT mounting thread. Fitting option 04 supplies one NPT plug only. Check the remaining cable entry and machine geometry; the housing is not the CA-prefixed explosion-proof version.
Check the selected proximity-probe system and the machine target independently of the housing material. Cable entries, thread engagement and sleeve support must match the controlled installation; no housing drawing establishes a safe protection-system design by itself.
Features:
- 1.5-inch probe penetration
- Aluminum housing body
- Half-metre probe lead
The 21000-34-05-00-015-04-02 requires exact configuration and installation checks before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Compare all six option fields, not just the housing family. Retain the required penetration, standoff arrangement, probe lead, fittings and mounting thread.
This order uses aluminum for the body and 304 stainless steel for the sleeve. Review the installed material requirements and inspect the actual target clearance before replacement.
Preserve the applicable probe user guide and assembly drawing. The downloads are a data summary, an identified technical-data extract and a limited installation checklist, not a complete operation manual.
Features:
- 1.5-inch probe penetration
- Half-metre probe lead
- 3/4-14 NPT mounting connection
The 21000-34-05-00-015-04-02 requires replacement verification of the complete ordered configuration and installed measurement system before commissioning.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The Manufacturer's Manual download is a manufacturer technical-data extract, not a complete operation manual. The installation guide contains only source-supported checks. Specifications of other configurations shown on source pages must not be applied to this exact order.
Features:
- Sources: Bently Nevada 141600 Rev. AC / 141194 Rev. AM
- Use complete equipment instructions for installation and commissioning.
- Accessories are supplied only when listed in the quotation
Documentation for the 21000-34-05-00-015-04-02 is supplied here as a technical-data extract; confirm manual availability in the written quotation.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.5 × 22.4 × 3.3 cm
-
Shipping weight0.10 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 21000-34-05-00-015-04-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which identifier should be quoted for 21000-34-05-00-015-04-02?
Use the complete 21000-34-05-00-015-04-02 identifier, proximity probe housing assembly, quantity and clear nameplate photographs. -
What should be matched before installing 21000-34-05-00-015-04-02?
Match the documented ratings, connections, revision and assigned role in Bently Nevada probe housing assemblies. -
What should incoming inspection cover for 21000-34-05-00-015-04-02?
Inspect the label, housing, connectors, terminals and transport condition before use. -
Can a related Bently Nevada probe housing assemblies article replace 21000-34-05-00-015-04-02?
Do not assume interchangeability; compare the full identity, ratings, interfaces and configured role. -
Which records should be captured before removing 21000-34-05-00-015-04-02?
Record connector positions, wire labels, cabinet location, adjacent hardware and current diagnostics. -
Which configuration should be retained for 21000-34-05-00-015-04-02?
Archive the applicable controller or monitoring configuration, addresses and diagnostic records. -
How should 21000-34-05-00-015-04-02 be commissioned after installation?
Restore verified wiring and configuration, then test the affected proximity probe housing assembly function under controlled conditions. -
Which documents should remain with the 21000-34-05-00-015-04-02 asset record?
Retain receiving inspection, nameplate images, connection records, test results and final acceptance evidence.
READY TO VERIFY YOUR PART?
Get a 21000-34-05-00-015-04-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
