PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 21000, 24701, and 164818 ProbeHousing Assemblies
- 21000-16-10-00-076-03-02
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
21000-16-10-00-076-03-02 Proximity Probe Housing Assemblies
Bently Nevada 21000-16-10-00-076-03-02 is an external proximity-probe housing assembly in the 21000 and 24701 range. It supports an installed 3300 XL 8 mm probe for shaft vibration and position measurements in compatible machinery-monitoring configurations.
The assembly combines an aluminum housing, stainless-steel sleeve and a 1.0 m probe lead. Its ordered penetration is 7.6 inches, with no standoff adapter and a 3/4-14 NPT mounting thread. Fitting option 03 provides a plug, reducer and cable seal grip; external access permits probe adjustment and replacement.
The assembly combines an aluminum housing, stainless-steel sleeve and a 1.0 m probe lead. Its ordered penetration is 7.6 inches, with no standoff adapter and a 3/4-14 NPT mounting thread. Fitting option 03 provides a plug, reducer and cable seal grip; external access permits probe adjustment and replacement.
BEFORE YOU BUY
Confirm the complete external proximity probe housing assembly
ACTUAL APPLICATIONS
Application context for 21000-16-10-00-076-03-02
21000-16-10-00-076-03-02 is an external proximity probe housing assembly for compatible machinery-monitoring configurations. Typical fields include power generation, oil and gas processing, and paper production. Suitability depends on the ordered options and installed transducer system.
-
01 · PULP & PAPER
Pulp Processing and Industrial Paper Production
Pulp Processing and ProductionIndustrial Paper Manufacturing Processes -
02 · OIL & GAS
Petroleum Exploration and Natural Gas Production
Petroleum Production Process MonitoringIndustrial Natural Gas Processing -
03 · POWER GENERATION
Electric Power Production and Industrial Thermal Generation
Industrial Electric Power ProductionThermal Power Production Processes
Technical specifications for 21000-16-10-00-076-03-02
-
Product Model21000-16-10-00-076-03-02
-
Product ParametersProximity Probe Housing Assemblies
-
In stock8 units
-
ManufacturerBently Nevada
-
Installed probe configuration3300 XL 8 mm
-
Probe lead length1.0 m
-
Probe penetration7.6 in (193.04 mm)
-
Standoff adapter length0 in; no adapter
-
Mounting thread3/4-14 NPT
-
Housing body materialAluminum
-
Probe sleeve material304 stainless steel
-
Conduit port thread3/4-14 NPT
-
Fittings suppliedPlug, 3/4-to-1/2 NPT reducer and cable seal grip
-
Enclosure ratingCSA Type 4
-
Installed probe operating temperature-51 to +177 ℃
-
Penetration adjustment±13 mm
-
Sleeve support thresholdAbove 300 mm penetration plus standoff
-
Probe tip diameter8 mm
-
Reference probe gap1.3 mm
View all additional
Alternative Names
21000-16-10-00-076-03-02
21000 and 24701 proximity probe housing assemblies External proximity probe housing assembly
and 24701 proximity probe housing assemblies 3300 XL 8 mm installed probe configuration
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 21000-16-10-00-076-03-02 external proximity probe housing assembly
Bently Nevada 21000-16-10-00-076-03-02 is an external proximity-probe housing assembly in the 21000 and 24701 range. It supports an installed 3300 XL 8 mm probe for shaft vibration and position measurements in compatible machinery-monitoring configurations.
Verify the installed probe configuration (3300 XL 8 mm), probe lead length (1.0 m) and probe penetration (7.6 in (193.04 mm)) against the installed configuration. Keep the documented connections and mechanical clearances.
Use the applicable 21000 and 24701 proximity probe housing assemblies instructions to complete mounting and connection. Check the affected vibration or position channel, baseline signal and diagnostic indications before returning the machinery to operation.
Features:
- Installed probe configuration: 3300 XL 8 mm
- Probe lead length: 1.0 m
- Probe penetration: 7.6 in (193.04 mm)
The 21000-16-10-00-076-03-02 external proximity probe housing assembly requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 21000-16-10-00-076-03-02 external proximity probe housing assembly
Match the complete 21000-16-10-00-076-03-02 article and its ordered mechanical and connection options before replacement. The installed probe configuration is 3300 XL 8 mm, and the probe lead length is 1.0 m; another family member may have different options.
Record the existing external proximity probe housing assembly, routing, mounting position and companion transducer identification before removal. Preserve the channel settings and reference measurements, and follow the machine isolation procedure.
After fitting 21000-16-10-00-076-03-02, restore the documented mounting and connection arrangement. Check the relevant channel response, baseline and alarm configuration, then retain the final inspection and functional-test record.
Features:
- Installed probe configuration: 3300 XL 8 mm
- Probe lead length: 1.0 m
- Probe penetration: 7.6 in (193.04 mm)
The 21000-16-10-00-076-03-02 external proximity probe housing assembly requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 21000-16-10-00-076-03-02 external proximity probe housing assembly must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size35.46 × 8.33 × 8.33 cm
-
Shipping weight1.10kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 21000-16-10-00-076-03-02
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which XL probe and lead are included in the aluminum housing?
The assembly contains a 3300 XL 8 mm probe with a 1.0 m lead. -
What penetration is specified for the short housing sleeve?
Probe penetration is 7.6 in (193.04 mm). -
Is an additional standoff included with the 7.6-inch assembly?
Standoff adapter length is 0 in; no adapter. This aluminum body has a 7.6 in (193.04 mm) penetration sleeve. -
What reducer and cable grip accompany fitting option 03?
Fittings supplied is Plug, 3/4-to-1/2 NPT reducer and cable seal grip. This aluminum body has a 7.6 in (193.04 mm) penetration sleeve. -
How far can the short sleeve penetration be adjusted?
Penetration adjustment is ±13 mm. This aluminum body has a 7.6 in (193.04 mm) penetration sleeve. -
Which reference gap is shown for the installed 8mm probe?
Reference probe gap is 1.3 mm. -
What mounting connection must be stated when ordering the aluminum assembly?
State the complete article code and these ordered options: Installed probe configuration: 3300 XL 8 mm; Probe lead length: 1.0 m; Probe penetration: 7.6 in (193.04 mm); Standoff adapter length: 0 in; no adapter; Mounting thread: 3/4-14 NPT. -
Which sleeve and fitting details should be checked on delivery?
Compare the complete label and physical options with the purchase order: Probe lead length: 1.0 m; Probe penetration: 7.6 in (193.04 mm); Standoff adapter length: 0 in; no adapter; Mounting thread: 3/4-14 NPT.
READY TO VERIFY YOUR PART?
Get a 21000-16-10-00-076-03-02 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
-
21000-16-10-00-076-03-02Proximity Probe Housing AssembliesManufacturer: Bently NevadaView Details
-
31000-28-10-00-175-01-02Radial proximity probe housing assemblyManufacturer: Bently NevadaView Details
-
31000-28-10-00-165-01-02Radial proximity probe housing assemblyManufacturer: Bently NevadaView Details
-
-
-
-
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
