PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 5 mm Transducer System
- 330171-00-12-50-01-05
In Stock
Fast Shipping Available
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
1.2-inch case with 5.0-metre non-armored lead
Bently Nevada 330171-00-12-50-01-05 is a non-armored proximity probe for the 3300 5 mm Transducer System. This configuration combines a 1/4-28 UNF mounting thread, a 1.2-inch overall case and a 5.0-metre probe lead for non-contact shaft measurements.
The 5.0-metre lead must be matched to the documented Proximitor Sensor system length. Check case clearance, target material, connector protection and the installed gap before commissioning. Adding XL components does not upgrade this probe system to full XL performance specifications.
The 5.0-metre lead must be matched to the documented Proximitor Sensor system length. Check case clearance, target material, connector protection and the installed gap before commissioning. Adding XL components does not upgrade this probe system to full XL performance specifications.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330171-00-12-50-01-05
These are applications documented for the applicable manufacturer series. They do not establish installation of this exact order in a named customer project.
-
01 · SHAFT VIBRATION
Relative vibration on fluid-film bearings
The 1.2-inch probe case can be considered where its mounting geometry fits a shaft-vibration measurement point. The 5.0-metre non-armored lead connects through the documented transducer system; suitability depends on target clearance and the complete electrical length. -
02 · AXIAL POSITION
Shaft-position measurement at thrust locations
This non-armored probe configuration supports the series position-measurement function when the mounting thread, initial gap and conductive target match the approved installation. Case length defines mechanical fit, not additional measurement range. -
03 · SPEED REFERENCE
Keyphasor and shaft-speed measurements
The 3300 5 mm system supports phase-reference and speed measurements. Apply this 5.0-metre probe only with the documented Proximitor arrangement and target geometry; a compatible monitor and correctly configured measurement channel are still required.
Technical specifications for 330171-00-12-50-01-05
-
Product Model330171-00-12-50-01-05
-
Product ParametersNon-armored proximity probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting thread1/4-28 UNF-2A
-
Cable armorWithout armor
-
Unthreaded length0.0 in; option 00
-
Overall case length1.2 in; option 12
-
Probe total length5.0 m
-
Connector configurationMiniature coaxial ClickLoc with connector protector; standard cable, option 01
-
Approval optionMultiple approvals, option 05; verify the supplied label and application certificate
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Probe case materialAISI 303 or 304 stainless steel
-
Cable construction75-ohm triaxial cable with FEP insulation
-
Minimum cable bend radius25.4 mm (1.0 in)
-
Probe operating temperature-35 to +177 degrees C
-
Recommended case torque5.1 N m; maximum 7.3 N m
-
Minimum tensile strength222 N, probe case-to-lead and lead-to-connector
View all additional
Alternative Names
330171-00-12-50-01-05 proximity probe
3300 5 mm non-armored probe 1.2 in 5.0 m
Bently Nevada 330171-00-12-50-01-05 shaft probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 5 MM TRANSDUCER SYSTEM
Integrate the complete proximity probe configuration
330171-00-12-50-01-05 is a probe, not a standalone vibration transmitter. It operates as part of the 3300 5 mm system with the applicable Proximitor Sensor and, where required, an extension cable.
A five-metre probe is used only with a five-metre Proximitor Sensor; do not add an extension cable.
Use the official mounting and wiring requirements for the conductive target, cable route and monitor. XL extension cables or Proximitor components do not remove the performance limits associated with a non-XL 3300 5 mm probe.
Features:
- Probe, cable and Proximitor form one measurement system
- A five-metre probe is used only with a five-metre Proximitor Sensor; do not add an extension cable.
- Verify gap and monitor configuration before commissioning
The Bently Nevada 330171-00-12-50-01-05 proximity probe requires the associated hardware, mounting and measurement configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Preserve the complete order 330171-00-12-50-01-05, including its 1.2-inch case, 5.0-metre total length, armor configuration, connector and approval options. Matching only the 330171 or 330172 family prefix is insufficient.
Compare the complete installed transducer system before substitution. Mechanical fit, electrical length, target material and measurement scaling must remain compatible; a different family member is not automatically a drop-in replacement.
The reviewed official material does not establish an exact-order discontinuation date, hardware revision or approved successor. Do not interpret a document revision as the hardware revision of the supplied probe.
Features:
- Match all ordering-code groups
- Verify mechanical and electrical compatibility
- No verified exact-order successor or discontinuation date
The Bently Nevada 330171-00-12-50-01-05 proximity probe requires replacement verification against the complete installed configuration and applicable manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Existing PDF references retained; verify document applicability before installation
- Match manufacturer document scope to the complete order and installed system
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330171-00-12-50-01-05 proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090 (China reference)
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330171-00-12-50-01-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does the 12-50 section identify?
It identifies a 1.2-inch overall case and a 5.0-metre total probe length in the imperial ordering table. -
Which Proximitor length matches this five-metre probe?
Use a five-metre Proximitor Sensor. The manufacturer specifically restricts five-metre probes to five-metre sensors. -
Does option 01 mean a Fluidloc cable?
No. Option 01 identifies a ClickLoc connector with protector and standard cable. Fluidloc configurations use different connector-option codes. -
Can this probe supply a Keyphasor signal?
The 3300 5 mm system supports Keyphasor and speed applications. The conductive target and associated monitor configuration must meet the documented installation requirements. -
How close can the cable bend near the installation?
Maintain at least the documented 25.4 mm cable bend radius and provide mechanical protection appropriate to the installation. -
Is the probe case made from stainless steel?
The series datasheet specifies AISI 303 or 304 stainless steel for the probe case and PPS for the tip. -
Does approval code 05 identify one universal certificate?
No. It selects multiple approvals. Confirm the actual product marking and the certificate applicable to the installation rather than assuming every approval applies.
READY TO VERIFY YOUR PART?
Get a 330171-00-12-50-01-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
