PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 5 mm Transducer System
- 330171-00-14-10-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Five millimeter proximity probe
Bently Nevada 330171-00-14-10-02-05 is a proximity sensing probe. It is the non-contact sensing element of a matched probe, cable and signal-conditioning chain. The complete system converts conductive-target movement into a monitoring signal; mounting geometry and electrical length must fit the actual machine installation.
The documented base design uses 1/4-28 UNF threads without armor. The ordering table identifies a 1 m probe lead. Compare the supplied suffixes, target clearances and matching conditioner before installation or substitution.
The documented base design uses 1/4-28 UNF threads without armor. The ordering table identifies a 1 m probe lead. Compare the supplied suffixes, target clearances and matching conditioner before installation or substitution.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Where 330171-00-14-10-02-05 Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
-
01 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations. -
02 · OIL & GAS
Oil Production, Gas Processing and Petroleum Refining
Turbines and compressors serving liquefied natural gas production facilities.Refinery compressors and process pumps serving downstream petroleum production. -
03 · MINING & MINERALS
Mining Operations and Mineral Processing
Ore crushers and grinding mills at mineral processing plants.Process pumps and conveyors serving mineral processing plant operations.
Technical specifications for 330171-00-14-10-02-05
-
Product Model330171-00-14-10-02-05
-
Product ParametersFive millimeter proximity probe
-
In stock3 units
-
ManufacturerBently Nevada
-
Case thread1/4-28 UNF
-
Mounting arrangementForward mount
-
Probe armorWithout armor
-
Unthreaded length0 in
-
Overall case length1.4 in
-
Total probe length1 m
-
Cable selectionStandard
-
Connector protectionProtector not included
-
Approval option05; multiple approvals, verify supplied marking
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Probe case materialAISI 303 or 304 stainless steel
-
Cable construction75 ohm triaxial with FEP insulation
-
Minimum cable bend radius25.4 mm
-
Connector tighteningFinger tight for two XL ClickLoc connectors
-
Recommended case torque5.1 N m
View all additional
Alternative Names
330171 00 14 10 02 05
330171-00-14-10-02-05 proximity sensing probe
Bently Nevada 330171-00-14-10-02-05
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
FIVE MILLIMETER PROXIMITY PROBE
Integrating 330171-00-14-10-02-05
It is the non-contact sensing element of a matched probe, cable and signal-conditioning chain. The complete system converts conductive-target movement into a monitoring signal; mounting geometry and electrical length must fit the actual machine installation.
Match the electrical length of the probe and extension cable to the Proximitor Sensor. Mixed XL and non-XL 3300 5 mm or 8 mm components are limited to non-XL performance; physical fit alone is insufficient.
Use the documented mounting arrangement, protect the connector, and preserve the 25.4 mm minimum cable bend radius. Set the operating gap from the matched system instructions. Case length is not the calibrated electrical system length.
Features:
- Match the complete ordering identity, mounting interface, electrical connections and operating limits
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 330171-00-14-10-02-05 proximity sensing probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 330171-00-14-10-02-05 requires comparing the complete ordering identity, mounting interface, electrical connections and operating limits. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Match the electrical length of the probe and extension cable to the Proximitor Sensor. Mixed XL and non-XL 3300 5 mm or 8 mm components are limited to non-XL performance; physical fit alone is insufficient.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 330171-00-14-10-02-05 proximity sensing probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330171-00-14-10-02-05 proximity sensing probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size18x18x1.5cm
-
Shipping weight0.16 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330171-00-14-10-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What is the documented identity of 330171-00-14-10-02-05?
The documented base design uses 1/4-28 UNF threads without armor. The ordering table identifies a 1 m probe lead. Compare the supplied suffixes, target clearances and matching conditioner before installation or substitution. -
What function does this proximity sensing probe perform?
It is the non-contact sensing element of a matched probe, cable and signal-conditioning chain. The complete system converts conductive-target movement into a monitoring signal; mounting geometry and electrical length must fit the actual machine installation. -
What must be matched when connecting this 330171?
Match the electrical length of the probe and extension cable to the Proximitor Sensor. Mixed XL and non-XL 3300 5 mm or 8 mm components are limited to non-XL performance; physical fit alone is insufficient. -
Which documented application is relevant to this configuration?
A matched probe and signal conditioner measure shaft motion relative to the bearing-mounted sensing point. -
What must the installer check before commissioning?
Use the documented mounting arrangement, protect the connector, and preserve the 25.4 mm minimum cable bend radius. Set the operating gap from the matched system instructions. Case length is not the calibrated electrical system length. -
What does the manufacturer specify for minimum cable bend radius?
25.4 mm. This value belongs to the documented product or family scope; unresolved ordering fields are not inferred. -
Are all suffixes, revisions and replacements confirmed?
The listed ordering options are supported by the referenced table. Product hardware revisions, discontinuation dates and designated successors require separate manufacturer confirmation; a document revision does not establish a product revision.
READY TO VERIFY YOUR PART?
Get a 330171-00-14-10-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
