PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 System
- 09E01KPS 3300XL 8MM
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
09E01KPS 3300XL 8MM 3300 XL Series Proximitor System
Bently Nevada 09E01KPS 3300XL 8MM is a 3300 XL Series Proximitor System for the 3300 System. It is used to 3300 Xl Series Proximitor System. Confirm the complete article identity, electrical limits, interfaces, companion hardware and controlled commissioning procedure before ordering.
BEFORE YOU BUY
Confirm the complete 3300 XL Series Proximitor System
ACTUAL APPLICATIONS
Where 09E01KPS 3300XL 8MM Fits Across Industrial Application Areas
Industrial uses span production and utility equipment, subject to verified product compatibility, installation requirements and operating conditions.
- 01 · PULP & PAPER
Pulp Manufacturing and Paper Production
Pulp refiners and process pumps in integrated pulp mills.Paper machine press rolls and winders in papermaking facilities. - 02 · WATER & WASTEWATER
Municipal Wastewater Collection and Treatment
Sewage lift pumps serving municipal wastewater collection and treatment.Aeration blowers and sludge equipment in wastewater treatment plants. - 03 · POWER GENERATION
Electricity Generation and Power Plant Utilities
Gas and steam turbine generators in thermal power plants.Hydroelectric turbines and generators in conventional hydropower generating stations.
Technical specifications for 09E01KPS 3300XL 8MM
-
Product Model09E01KPS 3300XL 8MM
-
Product Parameters3300 XL Series Proximitor System
-
In stock1 unit
-
ManufacturerBently Nevada
-
Exact Part Number09E01KPS 3300XL 8MM
-
Product Family3300 System
-
Component Type3300 Xl Series Proximitor System
-
Article Format17 coded characters
-
Hardware ClassIndustrial monitoring assembly
-
MountingRack or panel installation
-
Supply Class24 V DC control circuits
-
Signal InterfaceCondition-monitoring I/O
-
Connector TypeKeyed industrial connector
-
Protection ClassIP20 cabinet equipment
-
Operating Range0 to +55 °C
-
Storage Range-40 to +85 °C
View all additional
Alternative Names
09E01KPS 3300XL 8MM
3300 System 3300 XL Series Proximitor System
Bently Nevada 3300 XL Series Proximitor System
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 09E01KPS 3300XL 8MM to the installed 3300 System
Bently Nevada 09E01KPS 3300XL 8MM is a 3300 XL Series Proximitor System used in the 3300 System. Use 09E01KPS 3300XL 8MM in the documented 3300 System measurement or protection channel. Match the exact order code, installed position, signal range and monitored machine function before work.
Photograph terminals, coaxial connectors, shields, earth points, rack slot and adjacent hardware before removing 09E01KPS 3300XL 8MM. Restore each connection to the controlled drawing. Confirm industrial monitoring assembly, rack or panel installation, the exact mechanical position and the approved system configuration before connection.
After installing 09E01KPS 3300XL 8MM, check transducer supply, gap or zero, signal response, alarms and rack diagnostics. Record the measured values before releasing the machine channel. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 09E01KPS 3300XL 8MM
- Product class: 3300 XL Series Proximitor System
- Family: 3300 System
The Bently Nevada 09E01KPS 3300XL 8MM requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 09E01KPS 3300XL 8MM identity before exchange
Replace 09E01KPS 3300XL 8MM only after matching the full article identity, 3300 XL Series Proximitor System, installed condition-monitoring i/o and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, ip20 cabinet equipment, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete measured baseline and final values. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 09E01KPS 3300XL 8MM
- Connection: IP20 cabinet equipment
- Test: Measured baseline and final values
The Bently Nevada 09E01KPS 3300XL 8MM requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.Features:
- Technical values prepared for 09E01KPS 3300XL 8MM
- Bently Nevada documentation matched to 3300 System
- Exact product identity required before service
Documentation for Bently Nevada 09E01KPS 3300XL 8MM must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size20.5 × 22.5 × 3.5cm
-
Shipping weight0.1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 09E01KPS 3300XL 8MM
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What receiving photos help verify 09E01KPS 3300XL 8MM?
Ask for front, rear, connector and full-nameplate photos that show the complete 09E01KPS 3300XL 8MM identity. -
How should maintenance verify the installed family for 09E01KPS 3300XL 8MM?
Confirm that 09E01KPS 3300XL 8MM is listed for the installed 3300 System hardware and configuration. -
What power and grounding checks apply to 09E01KPS 3300XL 8MM?
Isolate energy, verify the documented supply, protective earth and shield termination before energising 09E01KPS 3300XL 8MM. -
Which calibration values should be retained for 09E01KPS 3300XL 8MM?
Retain scale factor, linear range, frequency response, probe gap or channel configuration values used with 09E01KPS 3300XL 8MM. -
Which connection photographs are required before removing 09E01KPS 3300XL 8MM?
Capture the label, rack position, terminals, coaxial connectors, shields, earth points and adjacent hardware for 09E01KPS 3300XL 8MM. -
Which documents should accompany a quotation for 09E01KPS 3300XL 8MM?
Request the data sheet, installation instructions and an applicable manufacturer manual for 09E01KPS 3300XL 8MM when available. -
How should the monitored machine channel be protected during a 09E01KPS 3300XL 8MM exchange?
Bypass or trip-manage the affected protection channel under the approved site procedure before exchanging 09E01KPS 3300XL 8MM. -
What signal-range checks should engineering complete for 09E01KPS 3300XL 8MM?
Compare the documented input, output, range and frequency values for 09E01KPS 3300XL 8MM with the installed channel.
READY TO VERIFY YOUR PART?
Get a 09E01KPS 3300XL 8MM quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
