PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
4454-132 Thermocouple Heat Sensor Cable
Bently Nevada 4454-132 is a Thermocouple Heat Sensor Cable in the 3300 System. It is used to detect the specified process or machine condition and provide the corresponding signal.
Its documented configuration includes operating temp of -40°C to +200°C, max. continuous temp of Up to 260°C, humidity resistance of 95% RH (non-condensing), and exact part number of 4454-132. During operation, the Thermocouple Heat Sensor Cable detects the target condition and converts it into the specified electrical or digital signal.
Its documented configuration includes operating temp of -40°C to +200°C, max. continuous temp of Up to 260°C, humidity resistance of 95% RH (non-condensing), and exact part number of 4454-132. During operation, the Thermocouple Heat Sensor Cable detects the target condition and converts it into the specified electrical or digital signal.
BEFORE YOU BUY
Confirm the complete Thermocouple Heat Sensor Cable
ACTUAL APPLICATIONS
Where 4454-132 Fits Across Major Industry Sectors
Uses span chemicals, metals and water, subject to verified compatibility, operating conditions and project requirements.
- 01 · CHEMICAL PROCESSING
Petrochemical Production and Ammonia-Based Industrial Chemical Manufacturing
Ethylene production and petrochemical processing for industrial material manufacturing.Ammonia production for fertilizers and other industrial chemical products. - 02 · METALS & METALWORKING
Metal Casting and Finishing for Steel Product Manufacturing
Casting and slab production within integrated metal manufacturing operations.Metal pickling and finishing for commercial steel product manufacturing. - 03 · WATER & WASTEWATER
Sewage Residue Processing and Wastewater Solids Management
Sewage sludge treatment and processing within wastewater management operations.Residual solids dewatering and handling for wastewater disposal operations.
Technical specifications for 4454-132
-
Product Model4454-132
-
Product ParametersThermocouple Heat Sensor Cable
-
In stock1 unit
-
ManufacturerBently Nevada
-
Operating Temp-40°C to +200°C
-
Max. Continuous TempUp to 260°C
-
Humidity Resistance95% RH (non-condensing)
-
Exact Part Number4454-132
-
Product Family3300 System
-
Component TypeThermocouple Heat Sensor Cable
-
Measurement PrincipleEddy-current proximity sensing
-
Nominal Probe Tip8 mm sensor family
-
Power Supply-17.5 to -26 V DC
-
Scale Factor7.87 V/mm nominal
-
Linear Range0.25 to 2.30 mm
-
Frequency Response0 to 10 kHz
-
Target MaterialAISI 4140 steel
-
Cable Impedance75 ohm triaxial
-
Output Resistance50 ohm nominal
View all additional
Alternative Names
4454 132
3300 System Thermocouple Heat Sensor Cable
Bently Nevada Thermocouple Heat Sensor Cable
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Match 4454-132 to the installed 3300 System
Bently Nevada 4454-132 is a Thermocouple Heat Sensor Cable used in the 3300 System. Use 4454-132 in the documented 3300 System measurement or protection channel. Match the exact order code, installed position, signal range and monitored machine function before work.
Photograph terminals, coaxial connectors, shields, earth points, rack slot and adjacent hardware before removing 4454-132. Restore each connection to the controlled drawing. Confirm 3300 system, thermocouple heat sensor cable, the exact mechanical position and the approved system configuration before connection.
After installing 4454-132, check transducer supply, gap or zero, signal response, alarms and rack diagnostics. Record the measured values before releasing the machine channel. Use qualified personnel, keep the applicable manufacturer instructions at the work location and retain the measured results with the equipment service record.
Features:
- Exact identity: 4454-132
- Product class: Thermocouple Heat Sensor Cable
- Family: 3300 System
The Bently Nevada 4454-132 requires documented system integration before energising the equipment.
REPLACEMENT CONTROL
Verify the complete 4454-132 identity before exchange
Replace 4454-132 only after matching the full article identity, Thermocouple Heat Sensor Cable, installed 8 mm sensor family and documented system role. A similar family name or physical outline does not establish interchangeability.
Before removal, photograph the product label, mounting position, 7.87 v/mm nominal, cable routing, shields, earth connections and adjacent assemblies. Preserve the approved configuration or parameter backup for recovery.
After installation, restore all controlled settings and complete 50 ohm nominal. Review status indications and diagnostics, test the affected function at a safe operating point, and record the final maintenance acceptance evidence.
Features:
- Exact identity: 4454-132
- Connection: 7.87 V/mm nominal
- Test: 50 ohm nominal
The Bently Nevada 4454-132 requires documented replacement verification before energising the equipment.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software and certificates are included only when listed in the quotation.
Features:
- Technical values prepared for 4454-132
- Bently Nevada documentation matched to 3300 System
- Exact product identity required before service
Documentation for Bently Nevada 4454-132 must match the installed equipment and complete product identity; confirm manual applicability before service.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size18 × 18 × 2cm
-
Shipping weight0.26 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8537101190
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 4454-132
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which suffixes must match when sourcing 4454-132?
Match every numeric and letter suffix in 4454-132; a similar base series does not prove interchangeability. -
Which companion components belong to the complete 4454-132 system?
Check all sensors, cables, interface modules, rack power and monitoring channels documented with 4454-132. -
What incoming inspection should a buyer request for 4454-132?
Inspect the exact label, housing, connectors, pins, seals and packaging for 4454-132. -
How should alarm and diagnostic results be recorded for 4454-132?
Record baseline and final channel values, status LEDs, alerts, danger alarms and rack diagnostics for 4454-132. -
What receiving photos help verify 4454-132?
Ask for front, rear, connector and full-nameplate photos that show the complete 4454-132 identity. -
How should maintenance verify the installed family for 4454-132?
Confirm that 4454-132 is listed for the installed 3300 System hardware and configuration. -
What power and grounding checks apply to 4454-132?
Isolate energy, verify the documented supply, protective earth and shield termination before energising 4454-132. -
Which calibration values should be retained for 4454-132?
Retain scale factor, linear range, frequency response, probe gap or channel configuration values used with 4454-132.
READY TO VERIFY YOUR PART?
Get a 4454-132 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
