PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 11mm Proximity Transducer
- 330707-00-20-10-12-00
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
Eleven millimeter proximity probe
Bently Nevada 330707-00-20-10-12-00 is an eleven-millimetre proximity probe. The probe provides non-contact position and vibration sensing in a matched 11 mm transducer chain. Its extension cable and Proximitor Sensor support the manufacturer-documented longer-range shaft, thrust and differential-expansion measurements, with configuration and target geometry checked for the application.
The case specifies 0 in unthreaded and 2 in overall length. Total probe length is 1 m. Match the ordered thread, cable connection and approval option to the installed system. Unresolved fields require confirmation before replacement; the base number alone does not establish a complete interchangeable assembly.
The case specifies 0 in unthreaded and 2 in overall length. Total probe length is 1 m. Match the ordered thread, cable connection and approval option to the installed system. Unresolved fields require confirmation before replacement; the base number alone does not establish a complete interchangeable assembly.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Applications for 3300 XL 11 mm proximity transducer system
These applications describe manufacturer-documented family use. They do not establish that this exact ordering code was installed at a named customer site.
-
01 · THRUST POSITION
Longer-range turbine shaft measurements
The 11 mm family supports axial thrust-position measurements where its documented measuring range suits the target. The probe observes axial target movement without contact. -
02 · DIFFERENTIAL EXPANSION
Steam-turbine ramp measurements
The manufacturer identifies ramp differential-expansion measurements on steam turbines. Match the complete 11 mm sensing chain and ramp geometry to the configured monitor; do not transfer an 8 mm calibration to this application. -
03 · RECIPROCATING MACHINERY
Compressor rod-position monitoring
The manufacturer lists rod-position and rod-drop measurements on reciprocating compressors. The complete transducer chain and target arrangement must suit the configured channel rather than being chosen by a shared connector alone.
Technical specifications for 330707-00-20-10-12-00
-
Product Model330707-00-20-10-12-00
-
Product ParametersEleven millimeter proximity probe
-
In stock9 units
-
ManufacturerBently Nevada
-
Case thread5/8-18 UNF
-
Armor selectionWithout armor
-
Mounting configurationForward mount
-
Unthreaded length0 in
-
Overall case length2 in
-
Total probe length1 m
-
Cable and connector selectionFluidLoc cable without connector protector
-
Agency approval optionNot required
-
Case materialAISI304 stainless steel
-
Tip materialPolyphenylene sulfide (PPS)
-
Lead construction75 ohm triaxial FEP-insulated cable
-
Probe operating and storage range-52 to +177 deg C
-
Recommended case torque15.2 N m
-
Connector materialGold-plated brass
-
Minimum cable bend radius25.4 mm
View all additional
Alternative Names
330707-00-20-10-12-00 eleven-millimetre proximity probe
3300 XL 11 mm proximity transducer system 330707-00-20-10-12-00
Bently Nevada 330707 00 20 10 12 00
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
ELEVEN MILLIMETER PROXIMITY PROBE
Integrating 330707-00-20-10-12-00
The probe provides non-contact position and vibration sensing in a matched 11 mm transducer chain. Its extension cable and Proximitor Sensor support the manufacturer-documented longer-range shaft, thrust and differential-expansion measurements, with configuration and target geometry checked for the application.
Use a matching 3300 XL 11 mm probe, extension cable and Proximitor Sensor. Upgrading a 7200 11 mm or 14 mm system requires all three sensing components and the appropriate monitor update; an existing 3300 monitor may require modification.
Use the documented 5/8-18 UNF interface and 15.2 N m recommended mounting torque. Set the target gap from the applicable transducer instructions, respect cable bend and target-clearance requirements, and protect the connectors. Probe environmental limits do not apply to the Proximitor Sensor.
Features:
- Match probe family, electrical length, target geometry, mounting and monitor configuration
- Follow the applicable installation instructions
- Confirm unverified configuration details
The 330707-00-20-10-12-00 eleven-millimetre proximity probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Replacement of 330707-00-20-10-12-00 requires comparing probe family, electrical length, target geometry, mounting and monitor configuration. A shared base family or similar appearance does not establish a drop-in replacement for the complete ordered assembly.
Use a matching 3300 XL 11 mm probe, extension cable and Proximitor Sensor. Upgrading a 7200 11 mm or 14 mm system requires all three sensing components and the appropriate monitor update; an existing 3300 monitor may require modification.
No verified exact-order discontinuation date, product revision or designated successor is asserted. Document revisions identify the reference literature, not hardware changes to the supplied product. Unconfirmed replacement options must be resolved before substitution.
Features:
- Preserve the complete ordering identity
- Compare the installed electrical and mechanical interfaces
- Do not infer hardware revisions or successor models
The 330707-00-20-10-12-00 eleven-millimetre proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: No verified product PDF is currently available on this page. Amikong-hosted reference documents will be listed only after their product identity and scope have been checked. Consult the applicable manufacturer instructions before use; additional documents are included only when expressly listed in the quotation.Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330707-00-20-10-12-00 eleven-millimetre proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.6x2.3x123cm
-
Shipping weight0.1 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031809090
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330707-00-20-10-12-00
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
What does 330707-00-20-10-12-00 identify?
The case specifies 0 in unthreaded and 2 in overall length. Total probe length is 1 m. Match the ordered thread, cable connection and approval option to the installed system. Unresolved fields require confirmation before replacement; the base number alone does not establish a complete interchangeable assembly. -
What is the role of this eleven-millimetre proximity probe?
The probe provides non-contact position and vibration sensing in a matched 11 mm transducer chain. Its extension cable and Proximitor Sensor support the manufacturer-documented longer-range shaft, thrust and differential-expansion measurements, with configuration and target geometry checked for the application. -
Which sensing chain is compatible with 330707?
Use a matching 3300 XL 11 mm probe, extension cable and Proximitor Sensor. Upgrading a 7200 11 mm or 14 mm system requires all three sensing components and the appropriate monitor update; an existing 3300 monitor may require modification. -
Which machinery application is documented for this family?
The 11 mm family supports axial thrust-position measurements where its documented measuring range suits the target. The probe observes axial target movement without contact. -
What installation checks are required for this configuration?
Use the documented 5/8-18 UNF interface and 15.2 N m recommended mounting torque. Set the target gap from the applicable transducer instructions, respect cable bend and target-clearance requirements, and protect the connectors. Probe environmental limits do not apply to the Proximitor Sensor. -
What is the recommended target gap for the complete system?
The documented nominal gap is 2.5 mm for the 11 mm system under the stated test conditions. The standard performance conditions use a supplied AISI 4140 steel target at least 31 mm in diameter, with probe, cable and sensor at 0 to 45 deg C. -
Can a pressure-seal test be assumed from the probe part number?
No. The manufacturer states that these probes are not pressure-tested before shipment. Specify a required test separately and ensure safe containment of fluids; do not interpret the probe as a certified pressure boundary.
READY TO VERIFY YOUR PART?
Get a 330707-00-20-10-12-00 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
