PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 11mm Proximity Transducer
- 330780-X1-00 MOD:148367-58
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
330780 signal conditioning with MOD verification required
Bently Nevada 330780-X1-00 MOD:148367-58 identifies a modified 330780 Proximitor Sensor listing in the 3300 XL 11 mm transducer family. Standard family documentation describes signal conditioning for an associated proximity probe and extension cable, rather than a standalone contact sensor.
The public ordering table does not decode X1 or MOD:148367-58. System length, mounting arrangement and modification-specific ratings therefore require confirmation from the supplied label and manufacturer documentation. Standard-series reference values must not be treated as verified specifications for this modified order.
The public ordering table does not decode X1 or MOD:148367-58. System length, mounting arrangement and modification-specific ratings therefore require confirmation from the supplied label and manufacturer documentation. Standard-series reference values must not be treated as verified specifications for this modified order.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330780-X1-00 MOD:148367-58
These are applications documented for the applicable manufacturer series. They do not establish installation of this exact order in a named customer project.
-
01 · THRUST POSITION
Axial position in fluid-film-bearing machinery
The standard 3300 XL 11 mm system measures axial thrust position where its extended linear range is suitable. A 330780 sensor conditions the associated probe signal. Use of this X1 modification requires separate verification of its electrical and mechanical configuration. -
02 · TURBINE EXPANSION
Ramp-based differential-expansion monitoring
Official family documentation identifies ramp differential-expansion measurements on steam turbines. The standard Proximitor Sensor converts probe distance into a monitor signal; this series application does not establish that MOD:148367-58 is installed or approved in a particular turbine. -
03 · COMPRESSOR MONITORING
Reciprocating-compressor rod-position measurement
The standard 11 mm family supports reciprocating-compressor rod-position and rod-drop measurements. Confirm target geometry, system length and monitoring requirements before considering this modified sensor; a documented family application is not an exact-MOD compatibility approval.
Technical specifications for 330780-X1-00 MOD:148367-58
-
Product Model330780-X1-00 MOD:148367-58
-
Product Parameters11 mm Proximitor sensor
-
In stock1 unit
-
ManufacturerBently Nevada
-
Reference scopeStandard 330780 series only; applicability to MOD:148367-58 requires manufacturer confirmation
-
Standard-series inputOne 3300 XL 11 mm probe with matching extension cable
-
Standard-series scale factor3.94 V/mm (100 mV/mil)
-
Standard-series linear range4 mm, approximately 0.5 to 4.5 mm from target
-
Standard-series recommended gap2.5 mm
-
Standard-series output impedance50 ohms
-
Standard-series supply without barriers-17.5 to -26 V DC; range may reduce above -23.5 V
-
Standard-series maximum current12 mA
-
Standard-series frequency response0 to 8 kHz, +0/-3 dB, typical
-
Standard-series sensor operating temperature-52 to +100 degrees C
-
Standard-series sensor caseA380 aluminum
View all additional
Alternative Names
Bently Nevada 330780-X1-00 MOD:148367-58
330780 Proximitor Sensor MOD 148367-58
3300 XL 11 mm modified Proximitor 148367-58
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL 11MM PROXIMITY TRANSDUCER
Integrate the complete modified Proximitor Sensor configuration
Standard 330780 sensors operate with matching 3300 XL 11 mm probes and extension cables. The transducer components and monitor configuration must be selected as a complete measurement system.
The public standard ordering table lists specific mounting and length combinations, but it does not define X1 or MOD:148367-58. Neither a five- or nine-metre length nor a DIN mounting option is assigned to this listing without additional manufacturer evidence.
Standard-family supply, scaling and environmental values are shown only as reference information. Verify modification-specific ratings and the installed configuration before connecting power or commissioning this order.
Features:
- Verify the complete 11 mm transducer system
- Do not decode X1 from standard option suffixes
- Check modification-specific ratings before energization
The Bently Nevada 330780-X1-00 MOD:148367-58 modified Proximitor Sensor requires the associated hardware, mounting and measurement configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Retain the exact identifier 330780-X1-00 MOD:148367-58 when requesting a replacement. A standard 330780 order with a similar prefix is not an established equivalent to an undocumented modification.
The standard family can replace certain 7200 11 mm and 14 mm transducer systems only by replacing all relevant system components and checking monitor configuration. That migration guidance does not establish direct interchangeability for this modified sensor.
No reviewed official source establishes the exact MOD hardware revision, discontinuation date or approved successor. These fields remain unconfirmed until manufacturer documentation for the supplied configuration is available.
Features:
- Preserve MOD:148367-58 identity
- No inferred drop-in replacement
- Document revisions are not hardware revisions
The Bently Nevada 330780-X1-00 MOD:148367-58 modified Proximitor Sensor requires replacement verification against the complete installed configuration and applicable manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation. The existing PDFs contain unverified X1 length and DIN-mount interpretations; do not use those statements for configuration. Corrected PDFs are pending review.Features:
- Existing PDF references retained; verify document applicability before installation
- Match manufacturer document scope to the complete order and installed system
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330780-X1-00 MOD:148367-58 modified Proximitor Sensor must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size8.8 x 3.5 x 7 cm
-
Shipping weight0.2 kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090 (China reference)
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330780-X1-00 MOD:148367-58
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Can X1 be decoded as a DIN mounting option?
No. The public standard ordering table does not define X1. Do not infer a DIN mounting arrangement from its final digit. -
Is this modified sensor a five-metre or nine-metre version?
The exact system length is unconfirmed. Standard 330780 sensors have separately defined five- and nine-metre options, but those codes do not decode this X1 modification. -
What does a standard 330780 Proximitor Sensor do?
It conditions the signal from the matching 3300 XL 11 mm probe and extension cable into a voltage representing target distance. Applicability to this modification requires confirmation. -
Can the published 3.94 V/mm scale factor be assumed for this MOD?
It is the standard 3300 XL 11 mm family scale factor, not a verified modification-specific rating. Confirm the MOD documentation before configuring a monitor. -
Can an 11 mm sensor alone replace a 7200 system?
The manufacturer describes upgrading all transducer components when replacing the referenced 7200 11 mm or 14 mm system, with appropriate monitor configuration. This is not proof that the modified order is a drop-in replacement. -
What must be checked before installing a replacement?
Confirm the complete MOD identity, sensor length, probe and extension compatibility, power supply, mounting and monitor scaling against manufacturer documentation for the installed system. -
Does a datasheet revision establish the sensor hardware revision?
No. Datasheet 146256 Rev. T is a document revision. No hardware revision or exact-order discontinuation date was established for MOD:148367-58.
READY TO VERIFY YOUR PART?
Get a 330780-X1-00 MOD:148367-58 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
