PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330101-00-47-05-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
330101-00-47-05-02-05 8mm eddy-current proximity probe
Bently Nevada 330101-00-47-05-02-05 is an 8 mm proximity probe in the 3300 XL transducer-system range. It is used with a matched extension cable and Proximitor sensor to measure shaft vibration and position in compatible machinery-monitoring arrangements.
The probe has a 3/8-24 UNF case thread, 4.7 in (119.38 mm) overall case length and 0.5 m integral lead. Its connector configuration is clickloc without connector protector, and its cable armor is none. Eddy-current sensing provides a non-contact measurement when the complete probe, cable and Proximitor system is correctly matched.
The probe has a 3/8-24 UNF case thread, 4.7 in (119.38 mm) overall case length and 0.5 m integral lead. Its connector configuration is clickloc without connector protector, and its cable armor is none. Eddy-current sensing provides a non-contact measurement when the complete probe, cable and Proximitor system is correctly matched.
BEFORE YOU BUY
Confirm the complete 8mm eddy-current proximity probe
ACTUAL APPLICATIONS
Application context for 330101-00-47-05-02-05
330101-00-47-05-02-05 is an 8mm eddy-current proximity probe for compatible machinery-monitoring configurations. Typical fields include power generation, oil and gas processing, and paper production. Suitability depends on the ordered options and installed transducer system.
-
01 · PULP & PAPER
Pulp Processing and Industrial Paper Production
Pulp Processing and ProductionIndustrial Paper Manufacturing Processes -
02 · OIL & GAS
Petroleum Exploration and Natural Gas Production
Petroleum Production Process MonitoringIndustrial Natural Gas Processing -
03 · POWER GENERATION
Electric Power Production and Industrial Thermal Generation
Industrial Electric Power ProductionThermal Power Production Processes
Technical specifications for 330101-00-47-05-02-05
-
Product Model330101-00-47-05-02-05
-
Product Parameters8mm eddy-current proximity probe
-
In stock8 units
-
ManufacturerBently Nevada
-
Probe case thread3/8-24 UNF
-
Overall case length4.7 in (119.38 mm)
-
Integral lead length0.5 m
-
Unthreaded case length0.0 in
-
Cable armorNone
-
Connector configurationClickLoc without connector protector
-
Agency approval optionMultiple approvals
-
Probe tip diameter8 mm
-
Cable impedance75 Ω
-
Probe operating temperature-51 to +177 ℃
-
Connector maximum torque0.565 N·m
-
Matched system linear range2 mm; 0.25 to 2.30 mm gap
-
Matched system scale factor7.87 V/mm nominal
-
Matched system frequency response0 to 10 kHz
-
Probe DC resistance7.45 ±0.50 Ω
View all additional
Alternative Names
330101-00-47-05-02-05
3300 XL 8 mm proximity transducer systems 8mm eddy-current proximity probe
XL 8 mm proximity transducer systems 3/8-24 UNF probe case thread
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 330101-00-47-05-02-05 8mm eddy-current proximity probe
Bently Nevada 330101-00-47-05-02-05 is an 8 mm proximity probe in the 3300 XL transducer-system range. It is used with a matched extension cable and Proximitor sensor to measure shaft vibration and position in compatible machinery-monitoring arrangements.
Verify the probe case thread (3/8-24 UNF), overall case length (4.7 in (119.38 mm)) and integral lead length (0.5 m) against the installed configuration. Keep the documented connections and mechanical clearances.
Use the applicable 3300 XL 8 mm proximity transducer systems instructions to complete mounting and connection. Check the affected vibration or position channel, baseline signal and diagnostic indications before returning the machinery to operation.
Features:
- Probe case thread: 3/8-24 UNF
- Overall case length: 4.7 in (119.38 mm)
- Integral lead length: 0.5 m
The 330101-00-47-05-02-05 8mm eddy-current proximity probe requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 330101-00-47-05-02-05 8mm eddy-current proximity probe
Match the complete 330101-00-47-05-02-05 article and its ordered mechanical and connection options before replacement. The probe case thread is 3/8-24 UNF, and the overall case length is 4.7 in (119.38 mm); another family member may have different options.
Record the existing 8 mm eddy-current proximity probe, routing, mounting position and companion transducer identification before removal. Preserve the channel settings and reference measurements, and follow the machine isolation procedure.
After fitting 330101-00-47-05-02-05, restore the documented mounting and connection arrangement. Check the relevant channel response, baseline and alarm configuration, then retain the final inspection and functional-test record.
Features:
- Probe case thread: 3/8-24 UNF
- Overall case length: 4.7 in (119.38 mm)
- Integral lead length: 0.5 m
The 330101-00-47-05-02-05 8mm eddy-current proximity probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 330101-00-47-05-02-05 8mm eddy-current proximity probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size1.6 × 1.4 × 69 cm
-
Shipping weight0.05kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference9031900090
-
OriginUnited States
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330101-00-47-05-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does the long imperial case use a UNF mounting thread?
Probe case thread is 3/8-24 UNF. -
How long is the lead on the 4.7-inch case?
Integral lead length is 0.5 m. -
Does connector option 02 include a protector?
Connector configuration is ClickLoc without connector protector. -
Which approval group accompanies the imperial configuration?
Agency approval option is Multiple approvals. -
What nominal resistance applies to the half-metre probe?
Probe DC resistance is 7.45 ±0.50 Ω. -
What temperature limit applies to the sensing probe itself?
Probe operating temperature is -51 to +177 ℃. -
What must an order specify for the imperial half-metre version?
State the complete article code and these ordered options: Probe case thread: 3/8-24 UNF; Overall case length: 4.7 in (119.38 mm); Integral lead length: 0.5 m; Unthreaded case length: 0.0 in; Cable armor: None. -
How can the received imperial case be checked against the order?
Compare the complete label and physical options with the purchase order: Overall case length: 4.7 in (119.38 mm); Integral lead length: 0.5 m; Unthreaded case length: 0.0 in; Cable armor: None.
READY TO VERIFY YOUR PART?
Get a 330101-00-47-05-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
