PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330104-00-06-90-02-05
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
3300 XL 8 mm standard-mount proximity probe, M10 x 1, with armor
Bently Nevada 330104-00-06-90-02-05 is an armored metric 3300 XL 8 mm probe with a 60 mm case and nine-metre total length. The order selects standard cable and a ClickLoc connector without the separate protector package associated with option 01.
The assembly provides the sensing element for a correctly matched proximity channel used in machinery vibration, position or reference measurements. Confirm the nine-metre electrical configuration, metric thread engagement and protected cable route; mechanical case size does not determine the required Proximitor system length or approval conditions.
The assembly provides the sensing element for a correctly matched proximity channel used in machinery vibration, position or reference measurements. Confirm the nine-metre electrical configuration, metric thread engagement and protected cable route; mechanical case size does not determine the required Proximitor system length or approval conditions.
BEFORE YOU BUY
Confirm the complete installed configuration
ACTUAL APPLICATIONS
Application context for 330104-00-06-90-02-05
These uses are supported by the applicable manufacturer documentation. Series-level guidance does not prove that this complete order was installed in a particular customer project.
-
01 · BEARING MONITORING
Radial shaft sensing with a nine-metre assembly
The probe family supports vibration measurement on fluid-film bearing machinery. Select the nine-metre electrical arrangement independently of the compact metric case and maintain the correct target geometry at the sensing location. -
02 · POSITION MEASUREMENT
Distance monitoring at a conductive machine target
A compatible Proximitor channel converts the probe response into a distance-related measurement. The 60 mm case and armored route must fit the installation without changing the system gap or target requirements. -
03 · MACHINE TIMING
Phase-reference sensing for rotating machinery
This sensing family provides Keyphasor reference measurement in an appropriate monitoring system. The nine-metre assembly length must match the electrical channel; tachometer and overspeed work requires the separate manufacturer guidance.
Technical specifications for 330104-00-06-90-02-05
-
Product Model330104-00-06-90-02-05
-
Product ParametersArmored proximity sensing probe
-
In stock1 unit
-
ManufacturerBently Nevada
-
Mounting threadM10 x 1
-
Unthreaded length0 mm
-
Overall case length60 mm
-
Total probe length9.0 m
-
Cable armorArmored
-
Probe cable construction75-ohm triaxial cable with FEP insulation
-
Connector packageMiniature coaxial ClickLoc; no connector protector included
-
Probe tip materialPolyphenylene sulfide (PPS)
-
Probe case materialAISI 303 or 304 stainless steel
-
Probe temperature range-52 to +177 deg C; pressure-seal caveat below -34 deg C
-
Nominal probe DC resistance9.87 +/- 0.50 ohm, center to outer conductor
-
Probe case-to-lead tensile rating330 N maximum rated
-
Minimum cable bend radius25.4 mm
-
Approval ordering optionCSA, ATEX and IECEx ordering option
View all additional
Alternative Names
330104-00-06-90-02-05 proximity probe
60 mm metric armored sensing probe
3300 XL 8 mm 9.0 m M10 probe
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
3300 XL 8 MM
3300 XL 8 mm proximity measurement chain
This 60 mm metric case provides the mechanical mounting arrangement for 330104-00-06-90-02-05. The complete 3300 XL 8 mm measuring chain combines the sensing probe with a compatible Proximitor and an extension cable where required; output specifications describe that assembled chain.
The selected total probe length is 9.0 m, separate from the 0 mm unthreaded portion and overall case length. Match the intended electrical system length rather than relying on physical connector fit or treating the probe as a standalone transmitter.
Check M10 x 1 mounting with no more than 15 mm specified thread engagement and maintain at least 25.4 mm cable bend radius. The selected 02 connector package does not include a protector, so assess the separate environmental protection required.
Features:
- Match probe length to the Proximitor chain
- 15 mm maximum specified thread engagement
- Conductive target and connector conditions matter
The Bently Nevada 330104-00-06-90-02-05 Noncontact proximity sensing probe requires the appropriate mounting, connections and configuration to be verified before system integration and commissioning.
INTERCHANGEABILITY
Verify the complete replacement identity before commissioning
Retain the complete 330104-00-06-90-02-05 configuration when assessing a replacement: 60 mm overall case, 9.0 m total length and armored cable. A matching sensing diameter does not establish identical case geometry, connection package or electrical length.
Bently Nevada documents physical and electrical interchangeability with certain non-XL 3300 5 mm and 8 mm components. However, mixing those components with XL parts limits the system to the non-XL performance specification; review the retained channel before claiming equivalent accuracy.
No exact hardware revision, withdrawal date or designated successor was confirmed for this order. Verify the required approval selection against the supplied certificate and complete installation. Recheck the configured measurement channel after an approved change.
Features:
- Retain every mechanical and electrical option
- Mixed XL/non-XL performance is restricted
- No unconditional successor confirmed
The Bently Nevada 330104-00-06-90-02-05 Noncontact proximity sensing probe requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikon-hosted reference packages, not direct manufacturer downloads. Refer to the applicable Bently Nevada documentation and supplied product identity before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the Bently Nevada 330104-00-06-90-02-05 Noncontact proximity sensing probe must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed sizePacked dimensions unconfirmed
-
Shipping weightGross weight unconfirmed
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS referenceClassification unconfirmed
-
OriginUSA
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 330104-00-06-90-02-05
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Does 06 mean a six-inch case on 330104?
No. This is the metric M10 x 1 probe family. The 06 overall case option is 60 mm, while the 90 total-length option is nine metres. -
Can this nine-metre probe be connected to a five-metre Proximitor?
Do not assume compatibility. The manufacturer specifies system electrical lengths and the probe must be matched to the intended channel. A nine-metre total probe does not become a five-metre assembly because the connectors fit. -
What DC resistance is published for the 90 probe length?
The nine-metre 3300 XL probe has a nominal 9.87 +/- 0.50 ohm resistance from center to outer conductor. It is distinct from the resistance of a nine-metre extension cable. -
Does standard cable option 02 offer the FluidLoc feature?
No. Options 11 and 12 identify FluidLoc cable. This order selects standard cable, so liquid-blocking claims must not be added from another configuration. -
What maximum M10 thread engagement applies to the 60 mm case?
The manufacturer states a 15 mm maximum engagement for M10 x 1 probes. Applications requiring deeper engagement must be reviewed with Bently Nevada. -
Does an armored cable eliminate the need for connector protection?
No. Cable armor and connector environmental protection serve different functions. The manufacturer recommends connector protectors, and the selected 02 option does not include one. -
Can a 330103 unarmored assembly be substituted without reviewing the installation?
No. A replacement must preserve the required mechanical, length, armor, cable and approval selections. Matching only the M10 thread and sensing family does not establish a drop-in replacement.
READY TO VERIFY YOUR PART?
Get a 330104-00-06-90-02-05 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
